IBASE Technology Inc.    Taipei   Taiwan
Oct 27, 2011 Measuring 102 x 147 mm, IB905 supports 2nd generation Intel® Core(TM) i7/i5/i3/Celeron® QC/DC CPUs up to 2.6 GHz, with integrated graphics and memory controller, and is based on Intel® QM67 Express chipset. SODIMM socket has 4 GB max capacity (1,067/1,333 MHz), and graphics interfaces include CRT, DVI, and 24-bit dual channel LVDS. For connectivity, SBC offers 2 Gigabit LAN, 6 USB 2.0, 2 USB 3.0, 2 serial, and 2 SATA III interfaces as well as Mini PCI-E slot.

AMETEK TIP (Technical & Industrial Products)    Kent, OH 44240
Oct 27, 2011 Depending on model, Nautilair(TM) 12.3 in. variable speed blowers achieve max sealed pressure capabilities up to 20 in. of H2O and max open flows to 1,000 cfm. Pre-mix blowers, when used with gas valve and venturi, deliver measured air/fuel mixture for optimized combustion and reduced nitrous oxide and carbon monoxide emissions. Versions can accept line voltage input of 120 or 240 Vac and are designed to operate in excess of 20,000 hr with minimal maintenance.

Beckman Coulter, Inc.    Fullerton, CA 92834-3100
Oct 27, 2011 Custom Design Services provides single and multicolor custom-tailored conjugate configurations as well as purified antibodies. Scientists work with human and non-human antibodies and use fluorochromes to create tests for range of targets. Specifically, 2- to 10-color panels can be composed to meet specific experimental requirements, and tandem dye technology optimizes coupling efficiency and SNR. Antibodies may be lyophilized or supplied in specified buffer solution.

Crystek Corp.    Fort Myers, FL 33913
Oct 27, 2011 Operating from 1,200-2,100 MHz with control voltage range of 0.5-25 V, CVCO55CW-1200-2100 features typ phase noise of -95 dBc/Hz @ 10 kHz offset and has typ output power of +6 dBm. U.S. manufactured product comes in 0.5 x 0.5 in. SMD package, accepts 12 V input, and has max current consumption rating of 35 mA. Pulling and Pushing are minimized to 25.0 MHz and 10.0 MHz/V, respectively, and second harmonic suppression is -8 dBc typ.

Larson Electronics, LLC    Kemp, TX 75143
Oct 27, 2011 Measuring 4 ft long with solid state LED light tubes and no ballast, Model GVP-48-2L-LED draws less than 0.2 A of power. Light fixture operates from 120-277 Vac and includes 2 LED lamps that provide 160° beam angle. Shatterproof polycarbonate lens enables glare-free output, while integral aluminum heat sink tube backings provide cool operation. Featuring 50,000 hour service life, Model GVP-48-2L-LED is suited for both indoor and outdoor applications.

Diagraph - An ITW Company    St. Charles, MO 63304
Oct 27, 2011 Using digital controls and no compressed air, E-Series Tamp Blow All-Electric Labeler provides accurate label placement. Tamp pad is extended 1/8¼ in. from product to be labeled, and then blows label onto it using same brushless fan motor that develops vacuum to hold label. Double action air flow valve changes vacuum draw into air blast coming out of same porting holes. Suitable for labels ranging from 1¼ x 1¼ in. up to 4 x 6 in., system offers application rate of 55 ppm.

R & M Energy Systems    Houston, TX 77060
Oct 27, 2011 Era® Blazer(TM) Rod Guides can increase production and decrease workover costs by extending rod and tubing service life in standard and high-temperature applications such as progressing cavity downhole pumping. Manufactured from engineered plastics enhanced with performance additives tailored to withstand high-temperature well conditions, products feature spin-thru design that reduces torque generated by mechanical and hydraulic friction of rotating rod string.

Baumer Ltd.    Southington, CT 06489 1534
Oct 27, 2011 With 14-bit single-turn and 12-bit multi-turn resolutions, GE404 Series delivers precise positioning data at velocities up to 10,000 rpm. Leakproof, IP67-compliant encoders feature Viton seals and class 1.4404 or 1.4435 V4A stainless steel housings, enabling them to withstand harsh washdowns and aggressive cleaning processes. ShaftLock bearing minimizes machine downtime by enduring vibration and high shaft loads that occur during processing and cleaning.

Corelis, Inc.    Cerritos, CA 90703
Oct 27, 2011 Supporting Turion(TM) II Neo, Athlon(TM) II Neo, Opteron(TM) 4100, and Opteron(TM) Quad-Core processors, ScanExpress JET provides automated at-speed, non-intrusive functional testing for SDRAM memory, SPI Flash, I2C, and UART. System features HyperTransport(TM) link validation, peripheral detection of PCI and PCIe buses, and fully automatic test development for all supported peripherals. No boot code is required for test execution.

TEMIS    Philadelphia, PA 19102
Oct 27, 2011 Suited for governments and digital publishers, Luxid® 6 automatically extracts relevant information, identifies relationships in unstructured data, and facilitates links between similar documents. Taxonomy Skill Cartridges® accelerate use of existing taxonomy to enrich document assets, while Rule-Based Skill Cartridges® capture domain experts' reasoning and apply it to content. Machine-learning Skill Cartridges® replicate experts' tagging strategies after preliminary training on annotated corpus.

Glowpoint, Inc.    Hillside, NJ 07205
Oct 27, 2011 Virtual Video Room v2.0 features Web-based moderator portal that lets meeting host optimize video experience, including screen layout adjustment for multipoint meetings in continuous or voice switched mode, for all participants. Portal also lets host add/drop participants during session, mute video/audio for individuals, and view connection quality of each participant. Support is also provided for Microsoft Lync and OCS users as well as SIP-based endpoints utilizing BFCP.

K-Tool International    Wixom, MI 48393
Oct 27, 2011 Along with Quick Lift technology, KTI low-profile service jack features heavy-duty steel frame, rear swivel casters, and 2-piece, 49 in. handle with rubber grips. Product has 4 ton capacity and 3 15/16 to 20 in. lifting range. Along with 6,500 lb capacity, KTI hand pallet jack has 27 in. fork width for load stability. Other features include 48 in. forks with lowered height of 3 in. and max lifting height of 7 ½ in., welded steel construction with powder-coated finish, and 210° turning radius.

Laserlinc    Fairborn, OH 45324
Oct 27, 2011 Designed specifically for integration with laser and ultrasonic measurement systems, µLinc(TM) has connectors for all system I/O located on back of unit, for scanning laser micrometers, encoder input, and UltraGauge+(TM) wall thickness system. Processor also includes detachable screw terminals for digital inputs, relay outputs, and analog I/O. Unit runs Total Vu(TM) measurement/data processing software, which provides in-process tolerance checking, trending, SPC, feedback control, and data logging.

LiveViewGPS Inc.    Valencia, CA 91355
Oct 27, 2011 Designed to protect valuable merchandise and equipment, LiveViewGPS PT-8100N measures 2.75 x 1.6 in. and can be configured from LiveViewGPS web portal to automatically send email and text message of every location generated by interval track. PT-8500 CDMA GPS Tracker, offering real-time vehicle and equipment tracking, measures 2.5 x 1 in. and operates in impaired environments with no clear view to sky. Built-in 3D accelerometer automatically transmits location each time motion is detected.

NewMomentum    San Rafael, CA 94901
Oct 27, 2011 Part of CyberAnalyst global monitoring platform, Site Detection module utilizes search engine technology to locate individual online sellers operating rogue sites or networks to sell illicit or unauthorized goods. In 2-step search process, data related to sellers is placed in temporary staging environment where it undergoes further automated filtering, classifying, and ranking. Only prioritized suspects are transferred to reports or CyberAnalyst customer-facing portal for display.

Tripp Lite    Chicago, IL 60609
Oct 27, 2011 With 1,500 Va/1.5 kVa output capacity, SmartPro SMART1500LCDXL keeps equipment operational during power failures and severe voltage fluctuations. Network-grade, 2U rack/tower unit features rotatable, interactive LCD panel that shows operating conditions and site power status in numeric and icon-based readouts. Product offers expandable runtime with external battery pack, and built-in USB/DB9 serial ports that work with PowerAlert software to provide network power monitoring and management.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Oct 27, 2011 Paired with EnPak Mechanic Series power system, EnPak® Hydraulic Tool Control allows simultaneous use of mechanic truck's hydraulic crane and 5 or 8 gpm hydraulic tools without switching between crane and circuit controls. HTC provides common hydraulic power distribution location for plumbing to tools and crane circuit, with flow rates to accommodate 5, 8, or 10 gpm hydraulic tools, or two 5 gpm tools. With EnPower technology, engine outputs only as much rpm as is needed to perform job.

Analog Devices Inc    Norwood, MA 02062
Oct 27, 2011 Integrating low-phase-noise, frequency-agile VCO and loop filter along with dynamic adaptive clock support, dual-input Model AD9557 and quad-input Model AD9558 translate any standard input frequency to any standard output frequency from 2 kHz to 1.25 GHz with sub-400 fs RMS total jitter on 12 kHz to 20 MHz. Adaptive clocking allows DPLL divider ratios to be changed while DPLL is locked. Fully programmable, ICs enable line card designers to use same component in many board designs.

Akamai Technologies    Cambridge, MA 02142
Oct 27, 2011 Akamai® DDoS Defender bundles multi-layered security capabilities to offer evolving set of cloud security capabilities that protect against distributed denial-of-service (DDoS) attacks. Consisting of 5 modules, Akamai Compliance Management solutions provide support tools and documentation to streamline compliance initiatives within diverse industry frameworks: HIPAA, PCI DSS, FISMA, ISO, and BITS. Both products are intended for use with Akamai Intelligent Platform(TM).

NAVTEQ Corp.    Chicago, IL 60654
Oct 27, 2011 Used with NAVTEQ Transport(TM), Loading Dock Locations provide additional Point of Interest (POI) information such as dock name and delivery entrance. This information can be used to create turn-by-turn guidance, down to last few meters, for navigation systems relying on NAVTEQ® map and content. Covering 10 metropolitan areas in U.S., solution can reduce driver and recipient frustration by enabling more timely and accurate pickup and delivery of shipped goods.