Guardair Corporation    Chicopee, MA 01020
Oct 20, 2011 Available in 24, 36, 48, 60, and 72 in. lengths, Force 5® gun delivers power necessary for heavy-duty industrial cleaning and maintenance applications. Field tests revealed output thrust capability of 302 scfm; there was less than 30 psi at tip when dead ended. Fully portable, U.S. manufactured product features all-metal construction, ¾ in. FNPT inlet, ergonomic handle, and adjustable auxiliary handle. Extended trigger allows full hand actuation.

Larson Electronics, LLC    Kemp, TX 75143
Oct 20, 2011 Constructed of aluminum, powder-coated LEDWP-250 has 50,000 hour LED operational life, operates from 110-270 Vac, and is ETL-approved for use in wet locations. Twelve 3 W LEDs, paired with reflector assembly, produce illumination for wall pack lighting and down lighting, upwards lighting, and security lighting systems. Adjustable through 380°/180° of rotation, fixture features shatterproof polycarbonate lens with water-tight seal and ½ in. water-tight power connector fitting.

Dytran Instruments, Inc.    Chatsworth, CA 91311
Oct 20, 2011 Providing 250 g range and 20 mV/g sensitivity, Model 3315A has upper frequency response of 10,000 Hz. Unit features built-in electronics, eliminating need for external charge amplifier and converter. Housed in stainless steel with radial 2-pin bayonet-style connector and ¼-28 mounting stud, Model 3315A includes internal case ground isolation to avoid EMI/ground loop interference, and hermetic sealing for operation in high-humidity and dirty environments.

BEI Sensors (BEI Industrial Encoders)    Goleta, CA 93117
Oct 20, 2011 Hollow shaft encoder, HS52, can operate directly in Division 1 and Zone 1 environments, where ignitable concentrations of flammable gases, vapors, or liquids are likely to exist under normal operating conditions. Product does not require accompanying intrinsic safety barrier, and enclosure can withstand and contain internal explosion of most volatile gas-to-air mixtures. Fitted with flexible shaft bore design, housing can be rigidly mounted.

CMM Dynamics Inc.    Apollo, PA 15613
Oct 20, 2011 Vision Slide® is suited for locating part or fixtured parts on CMM, CNC, or multi-sensor vision systems used for manual and/or automatic dimensional measurement. Solution ensures part is secure against working surfaces by using shielded concentrated earth magnets, which facilitates locating part precisely and repeatably on machine staging surface. Adjustable slide scale in X and Y axes lets operator/programmer choose multiple coordinate positions: A-G in Y-axis and 1-9 in X-axis.

HaydonKerk Motion Solutions    Waterbury, CT 06705
Oct 20, 2011 Allowing small-footprint linear actuator system for precision motion applications, Kerk® RGS/RGW linear rail platform features 180° folded-over motorized design. It contains all components needed for complete motion subassembly, including stepper motor, belt and pulley, precision lead screw, bearing supports, and rail with load carriage. Standard drive ratios available from motor to screw are 2:1, 1:1, and 1:2, and available screw leads range from 0.050-1.2 in./rev.

Lowell Corp.    West Boylston, MA 01583
Oct 20, 2011 Designed with ¾-14 threads to accommodate most professional quality slide hammers with self-tightening pull clamp, Model CL0199SH features conical base that is compatible with many clamps from other manufacturers in addition to Porter-Ferguson clamps. USA-made adapter gives auto body repair technicians more precise control over pulling operations that is possible with standard tightening pull rings.

Lowell Corp.    West Boylston, MA 01583
Oct 20, 2011 Designed for high line utility workers, Triple Square Impact Socket can be used with any impact wrench or rattle gun to install or tighten utility pole hardware. Tool has overall length of 7¾ in. with 3 square socket openings measuring ¾ in. for ½ in. hardware, 1 in. for 5/8 in. hardware, and 1 1/8 in. for ¾ in. hardware. Featuring 13/16 in. hollow shaft, Triple Socket allows workers to access nuts on many different threaded lengths.

Bollards by Reliance Foundry    Surrey, BC V3S7G7  Canada
Oct 20, 2011 Made of fully pigmented, self-finished, polyurethane material, models R-8351, R-8352, and R-8353 are fixed bollards that install into footing in ground and remain in place at all times. They withstand impacts that bend them up to 90° and will return to their upright position when load is removed. Bollards do not appear to be flexible or bendable upon first glance, however, and thus deter intentional vehicular ramming. There are 7 standard color options, with optional reflective striping.

Novatel Wireless, Inc.    Calgary T2E 7H7  Canada
Oct 20, 2011 Built for carrier, MVNO, and enterprise users, N4A Communication and Management Software v3.0 allows users to collect and process data from multiple wireless devices and integrate data collected into existing applications and IT systems. Providing secure platform to remotely access, control, and manage assets, software facilitates wireless device provisioning, deployment and updating. Software can be deployed in cloud or on-premise, and also allows users to develop custom reports and map assets.

Altera Corporation    San Jose, CA 95134
Oct 20, 2011 Based on virtual prototyping solutions, SoC FPGA Virtual Target enables immediate device-specific embedded software development targeting Altera SoC FPGA devices. This PC-based functional simulation of Altera SoC FPGA development board acts as binary- and register-compatible, functional equivalent of SoC FPGA board. Software developed on Virtual Target can be moved to actual board with minimal effort. Linux- and VxWorks-enabled solution is also supported by ARM ecosystem development tools.

Analog Devices, Inc.    Norwood, MA 02062-9106
Oct 20, 2011 Comprised of low noise, digital phase frequency detector; precision charge pump; programmable reference divider; and high-frequency programmable feedback dividers, ADF41020 can be used to implement local oscillators as high as 18 GHz in up-conversion and down-conversion sections of wireless receivers and transmitters. Bandwidth lets designers potentially eliminate frequency-doubler stage, and complete synthesizer can be implemented if PLL is used with external loop filter and VCO.

Attunity Inc.    Burlington, MA 01803
Oct 20, 2011 Attunity Replicate, with support for loading data to Microsoft SQL Azure, helps organizations accelerate cloud adoption. Solution fully automates loading process, starting with generation of target tables in cloud, continuing with full load of data, and following with incremental updates. Log-based technology captures and delivers transaction changes with minimal impact on source database systems, including Oracle, SQL Server, and DB2.

Avere Systems, Inc.    Pittsburgh, PA 15237
Oct 20, 2011 Supporting clusters of up to 50 appliances, FXT 3000/4000 series feature architecture that facilitates and accelerates scaling of performance separately from capacity to achieve millions of IOPS. Ability to place FXT nodes across wide area from storage servers eliminates latency penalty for remote application access. Also, file system organizes data across RAM, SSD, SAS, and SATA tiers to provide 5:1 reduction in disks, power, and rack space.

CA, Inc.    Islandia, NY 11749
Oct 20, 2011 Addressing security/compliance concerns, CA Access Control for Virtual Environments provides visibility and control over virtual environments with features such as activity logging and user password vaulting; automation of security operations to pre-set policies; and creation of secure, multi-tenant environment. Solution also helps control privileged user access by extending identity and access management security.

CA, Inc.    Islandia, NY 11749
Oct 20, 2011 With CA ERwin® Data Modeler for SQL Azure, users can manage and integrate their database infrastructure with SQL Azure cloud database environment. Program helps users make fact-based decisions about which data to move to cloud and which to keep on premise by empowering them to create inventory of data assets using single visual interface. Users can maintain cloud-based databases using familiar desktop data modeling paradigm, eliminating need for specialized training.

Cooper Lighting    Peachtree City, GA 30269
Oct 20, 2011 Based on AccuLED Optics(TM), LED LightBAR(TM) features application-specific design that allows output to be customized to exact needs of outdoor space, eliminating wasted energy and spill light. Units are available with 7 or 21 LEDs and 3 correlated color temperatures of 3,000, 4,000, and 6,000 K. LightBAR with 21 LEDs delivers up to 100 lm/W or 2,400 lumens, while 7 LED model provides 1,900 lumens. Applications include street lighting, area/site lighting, floodlighting, parking garages, and pathways.

NEVEX    Toronto   Canada
Oct 20, 2011 Offering file-based optimized caching solution, CacheWorks 1.0 accelerates performance of critical business applications running on physical servers as well as VMware and Microsoft Hyper-V virtual machines. Selective cache optimization technology empowers administrators by providing flexible control to accelerate specific data by application, file type, and location. Installed on physical and virtual servers, CacheWorks uses Flash/SSD to intelligently cache active application data.

NComputing    Redwood City, CA 94065
Oct 20, 2011 Optimizing configuration and management of VDI environments, vSpace Server 6.5 includes Create Once, Replicate Multiple Times feature, which uses configuration profile of one access device to automate all other access device configurations. IT managers can remotely view and control user sessions via Remote Session Control feature that can be deployed on permission/no-permission basis. For multimedia applications, program offers optimized audio quality and support for compatible microphones.

General Dynamics C4 Systems    Scottsdale, AZ 85257
Oct 20, 2011 Available as accessory for AN/PRC-154 Rifleman radio, Sidewinder Vehicle Mount equips vehicles that do not have communications capability with tactical radios operating in Soldier Radio Waveform network. Sidewinder's hardware assembly includes 20 W power amplifier from another JTRS HMS radio, AN/PRC-155, and connectors that work with vehicles' existing intercom systems. Radio can be removed from Sidewinder while maintaining connectivity with tactical network.