Addex, Inc.    Stoughton, MA 02072
Nov 18, 2010 Intended for blown film extrusion lines, automatic external gauge control (EGC) system includes automatic air ring system with 90-288 control zones. Film thickness variations can be reduced more than 50%, and 4 plenum sizes accept lip sets from 4-28 in. In addition to electronic circuit board in plenum area, features include mapping hardware and software for control processor as well as monitoring devices for reversing nip position and roll speed.

Legrand Electric Limited    Birmingham B19 2LF  United Kingdom
Nov 18, 2010 Designed to keep electrical assemblies free from paint and taping compound used during drywall finishing, DCP Clear Plastic Covers also offer visibility for inspections. Covers are removable after finishing and are available in 14 sizes for installed devices and for empty boxes with mud rings in 1-4 gang openings.

Zontec Inc.    Cincinnati, OH 45240
Nov 18, 2010 Suited for single users or networked implementation, Synergy 1000(TM) v7.0 facilitates set up of part, process, and characteristic files; traceability tags; assignable cause and corrective action notes. Program combines real-time alarm capabilities for variable and attribute data, plus Gage R/R, short run, advanced Pareto analyses, and intercharacteristic math calculations. Hyperlink file feature enables 1-click access to frequently accessed documents and web pages while running process.

Linear Technology    Dallas, TX 75248
Nov 18, 2010 Operating from 3-36 V, dual-output Model LT3692 delivers up to 3.5 A of continuous output current from each channel. Monolithic switching regulator provides user-programmable switching frequency from 250 kHz to 2.25 MHz. Independent input, shutdown, feedback, soft-start, current limit, and comparator pins for each channel simplify complex power supply tracking/sequencing requirements. Housed in 5 x 5 mm QFN package, IC is suited for load dump and cold crank conditions in automotive applications.

ADLINK Technology Inc.    Irvine, CA 92618
Nov 18, 2010 Incorporating Broadcom BCM56312 switch chip and Freescale MPC8313E PowerQUICC® II Pro 333 MHz processor, 24-port Model aTCA-3150 supports up to 13 GbE ports for 14-slot PICMG 3.0 ATCA system, with 6 egress GbE ports, and two 10 GbE SFP+ uplink ports via front panel access. Unit also includes Broadcom's FASTPATH® networking software and is designed for ATCA adopters who require AMC modularity, Gigabit layer 3 switching, scalable control-plane engine, and Base Interface.

Advantech Co. Ltd    Irvine, CA 92618
Nov 18, 2010 Powered by Intel® Atom(TM) D510 dual core processor up to 1.66 GHz, Model ARK-5260 offers 2 PCI slots and 1 PCIe x1 slot, rubber anti-vibration card-holder for PC expansion boards, two 2.5 in. SATA HDD bays, and front-side I/O interfaces. Unit has one 200-pin SODIMM slot for DDR2 667 MHz memory up to 2 GB, plus 5 USB 2.0 compliant ports and 2 GigaLANs. Supporting 12~24 Vdc input, ruggedized system provides 4 RS-232/422/485 serial ports to satisfy most industrial signal control needs.

Aremco Products, Inc.    Valley Cottage, NY 10989
Nov 18, 2010 Used to bond advanced ceramics, circuit boards, optical components, and semiconductors for dicing and polishing operations, Wafer-Mount(TM) 559 is available in 10 x 10 x 0.005 in. sheet and can be cut to desired shape. Semi-rigid, solvent-resistant, plastic film has PSA layer that accommodates machining operations that produce heat, vibration, and peel stresses. After use, substrate is removed from adhesive film by heating to 300°F for 2-3 min.

Enkon Systems Incorporated    Walled Lake, MI 48390 - 1662
Nov 18, 2010 Serving automation and robotic applications where control is of utmost importance, electric ball screw lift table offers static load positioning and speed directed by variable frequency drives. It can integrate with any automated system, is compatible with ac or dc motors, and lifts up to 50,000 lb with control capability rated to ±.03 in. Captured wheel guides prevent lift's platforms from tipping, while catch nut system prevents lift from falling in case load bearing nut fails.

Degree Controls Inc.    Milford, NH 03055
Nov 18, 2010 Supplied in 1.0 x 0.25 x 0.5 in. package with 0.1 in. pitch, F600 enables electronics manufacturers to anticipate thermal rise before it occurs by directly monitoring airflow at critical board locations. Board level sensor, used for continuous monitoring of airflow in small locations, has air velocity range of 100-1,000 fpm and offers output to sound alarm or reduce system power if loss of air velocity occurs. Communication to sensor is accomplished via I²C or UART interface.

Ondrives Ltd.    Chesterfield, Derbyshire S41 9RN  United Kingdom
Nov 18, 2010 HTD pulleys and belts include timing pulleys, starting at 5 mm pitch to suit 9, 15, and 25 mm wide belts, available with pilot or taper bore. Different versions are available depending on number of teeth required. Standard pitches also include 8 and 14 mm, which suit belts to 85 mm. Depending on size, pulleys are steel with zinc-plated steel flanges or cast iron, and belts are glass fiber reinforced, rubber back/teeth with nylon fabric tooth facing to DIN/ISO 5296.

Control Co.    Houston, TX 77258 8307
Nov 18, 2010 Blending natural hair, synthetic conductive fibers, and conductive composite handle, Static-Away(TM) Brush dissipates static while whisking away harmful dust, lint, and dirt from work environment. Because it will not scratch critical surfaces, brush is suited for cleaning film, slides, optics, cuvettes, balance pans, microscopes, electronics, and computer monitors. Brush comes in 4 sizes and handle lengths; long handle models access difficult places and eliminate possibility of hand touching.

Kontron    Poway, CA 92064
Nov 18, 2010 Optimized for temperature range of 0-60°C, nanoETXexpress-TTc features Intel Atom E6xx Series processor from 0.6-1.6 GHz and is suited for small-form-factor applications that are not subjected to extreme temperatures such as POS/POI and hospitality kiosks, indoor digital signage, and portable medical appliances. Unit is compatible with COM Express pin-out type 10 and allows 2 displays to be controlled independently. In addition to LVDS, board offers SDVO on Digital Display Interface.

Electri-Flex Co.    Roselle, IL 60172 1994
Nov 18, 2010 UL-Listed Type SLA(TM) has flexible steel conduit with galvanized steel core and tinned copper shielding braid. Latter offers 90% min shielding coverage, and flexible PVC jacket has -20 to +60°C rating. Offering waterproof raceway when assembled with liquid-tight fittings, -55 to +105°C rated Type EMS(TM) has PVC jacket extruded over flexible core of helically wound, fully interlocked strip of bronze. Rated -55 to +105°C, Type EMCS(TM) utilizes bronze core, PVC jacket, and tinned copper braid.

Electri-Flex Co.    Roselle, IL 60172 1994
Nov 18, 2010 Available in 3/8-2 in. sizes, Liquatite® LTFG has working temperature of -4 to +140°F, smooth exterior, and does not promote bacteria, making it suited for food processing and packaging as well as pharmaceutical manufacturing. Flexible inner core is made from continuously spiral-wound corrosion-resistant plated steel with nylon cord packing, while flexible PVC jacket is made from FDA-approved compound formulated for Splash Zone food and beverage contact per FDA CFR21 and NFS 51/61 requirements.

Michelman Inc.    Cincinnati, OH 45236
Nov 18, 2010 Designed for printing on HP Indigo WS6000 label and package digital printing press, DigiPrime 6029 produces optimal ink transfer, ink adhesion, and rub resistance on embossed and heavily textured, pressure-sensitive label stock. Forty-eight percent of active raw material in DigiPrime 6029 comes from renewable sources and product is also solvent-free, odorless, and repulpable.

Kimberly-Clark Professional    Roswell, GA 30076
Nov 18, 2010 Suitable for food and pharmaceutical processing industries, Jackson Safety H10 and H20 are disposable and reusable earplugs featuring embedded metal so they can be detected by scanners. Both are distinctive blue color for compliance monitoring and visibility, individually packaged for hygienic purposes, supplied in universal sizes, and available with cord for optimized safety and convenience.

Mate Precision Tooling    Anoka, MN 55303
Nov 18, 2010 Available for either Thick Turret or Trumpf style tooling, ValuGrind(TM) grinder features 165 mm dia diamond grinding wheel for optimal punch and die finish, and 1,050 W motor to deliver 4,050 rpm for precise surface finish. Unit has precise grind depth control set at 0.02 mm increments for precise finish and to avoid overgrinding. Measuring 820 x 520 x 675 mm in size, unit can handle thick turret tooling styles including AMX, MT, MTG, MTG Long, MXC, Ultra, and all A through E station sizes.

Allegro Microsystems    Walton-On-Thames S KT12 2TD  United Kingdom
Nov 18, 2010 Designed for LCD backlighting in consumer and industrial displays, multi-output white LED driver, A8515 can operate from single power supply of 5-40 V. Packaged in eTSSOP-16 (LP) exposed pad package, device integrates current-mode boost converter with internal power switch and 2 current sinks. LED current sinks in unit can be paralleled together to achieve LED currents up to 240 mA.

Baumer Ltd.    Southington, CT 06489 1534
Nov 18, 2010 With enhanced sensitivity in the near infrared, TXG14NIR is qualified for automatic inspection of wafers for solar cells. Measuring electroluminescence (EL) using NIR imaging cameras permits the detection of fractures as well as failures in crystal structure. High sensitivity camera provides images with 1,392 x 1,040 pixel resolution, enabling detection of structural defects within wafers.

Fujitsu Components America, Inc.    Sunnyvale, CA 94089
Nov 18, 2010 Series MBH7BTZ Bluetooth modules with embedded Serial Port Profile firmware are compliant with Bluetooth Specification Version 2.1 + EDR and RoHS directive. Units support UART, 9.6-1,382.4 kbps, as host interface, and communication distances of 10-30 m for Class 2 and up to 100 m for Class 1 applications. Suited for handheld terminals, mobile printers, scanners, barcode readers, and healthcare and industrial control devices, they include shielded, SMT modules with onboard or external antenna.