International Manufacturing Services, Inc. (IMS)    Portsmouth, RI 02871
Dec 09, 2011 Available in 1-10 dB attenuation with 9 different temperature characteristics, AV-0805 Series features nickel barrier layer for solder leach resistance. RoHS-compliant devices are suited for power amplifiers, LNAs, transceiver modules, and synthesizers as well as WiMax and WiFi equipment, fixed and mobile satellite radio, and test/measurement instrumentation.

Crystek Corp.    Fort Myers, FL 33907
Dec 09, 2011 With control voltage range of 0.1~4.9 V, Model CVCO55CC-2230-2430 features typical phase noise of -106 dBc/Hz at 10 kHz offset. Input voltage is 5 V with max current consumption of 32 mA, and output power is typically +3 dBm. Pulling and pushing are minimized to 1.0 MHz and 2.5 MHz/V, respectively. Housed in 0.5 x 0.5 in. SMD package, USA-made VCO is suited for digital radio equipment, fixed wireless access, satellite communications systems, and base stations.

APEM Components    Haverhill, MA 01835
Dec 09, 2011 Available in 9 cap colors and 8 LED colors or color combinations, Controlmec(TM) Single Pole/Momentary Switch is rated for 10 million operations. Solid cap has temperature range of -40 to +65°C, while LED operates from -40 to +85°C. Five-position integrated switch is suitable for control, navigating displays, or operating auxiliary equipment on vehicle or boat. Switch can also be supplied in IP67 sealed model.

APEM Components    Haverhill, MA 01835
Dec 09, 2011 Available in 4, 6, 10, and 16 positions, P65 series comes in 10 x 10 x 6.5 mm dual in-line package (DIP) supports reflow soldering temperature of 260°C for 10 sec, wave of 280°C for 5 sec, and 340°C for 2 sec. SMT and through-hole versions are available, both with mechanical lifetime of 30,000 steps and contact paths featuring abrasion-resistant gold plating. Standard actuators include arrow-shaped and cross-shaped slots; other actuators are available as options.

Aremco Products, Inc.    Valley Cottage, NY 10989
Dec 09, 2011 Consisting of single part, water-based, inorganic-ceramic coating system, Cerama-Dip(TM) 538N electrically isolates high-power ceramic resistors for applications up to 2,600°F. Odorless, VOC-free formula features volume resistivity of 109 W-cm and dielectric strength of 225 V/mil at room temperature. Applied by dipping or brushing, Cerama-Dip 538N cures by air-drying at room temperature for 1-2 hr, then step curing for 1-2 hr at 200°F and 350°F, respectively.

CTC International, Inc.    West Caldwell, NJ 07006
Dec 09, 2011 Engineered for non-stop packaging and converting, CS1214 Splicer has clamshell mechanism that opens 90° into horizontal plane to provide flat work table for prep work. Dual unwind shafts for supply rolls are located at bottom of machine, and 36 in. length allows placement in space-restricted areas. Able to accommodate 2 full 14 in. dia rolls, machine also employs Splice-at-any-speed System to ensure that change in line speed during splice will not affect registration of preprinted materials.

MaxLite    West Caldwell, NJ 07006
Dec 09, 2011 Suited for remodeling or new construction projects, 14 W Dimmable LED 6 in. Recessed Downlight Retrofit can replace 65 W BR40 incandescent lamps in recessed fixtures. Unit is engineered with chip array featuring ceramic LED technology, guaranteeing single bin color consistency with optimal illumination uniformity and minimal glare. Constructed without any hazardous materials, downlight turns on instantly from cold start without flickering and features CRI greater than 80.

Gluefast Co., Inc.    Neptune, NJ 07753
Dec 09, 2011 Comprised of 3 machines, case making system includes model Colonel-AG glue machine that applies glue onto book cover; several models are available that apply cold glue or hot protein glue. Glued cover is placed into Alignment Table component, which guides operator when placing binder board onto cover. Edge Turner component, included, takes cover and turns in edges to complete creation of hard cover. Entire process takes 1+ minute for most operators.

Mokon    Buffalo, NY 14207
Dec 09, 2011 Heat transfer fluid-based Full Range systems, combined with chiller, deliver respective heating and pumping capacities to 48 kW and 30 gpm. Capable of heating from 50 to 600°F, self-supporting unit incorporates microprocessor-based controller with LCD readout, green-friendly refrigerant, and continuous flow cool oil reservoir. System provides heating and cooling in one package, meets NFPA 79 electrical safety standards, and features insulated nonferrous components on chiller side.

EXAIR Corporation    Cincinnati, OH 45249-1621
Dec 09, 2011 Supplied with 30, 55, or 110 gallon drum, Premium Reversible Drum Vac(TM) System can fill 55 gallon drum in less than 2 minutes. With turn of knob, stainless steel pump quickly empties drum. Compressed air powered unit has no motors or impellers to clog or wear out. It comes complete with 2-way pump assembly, shutoff valve, 10 ft static-resistant hose, 20 ft compressed air hose, spill recovery kit, and drum dolly.

Columbia Research Labs., Inc.    Woodlyn, PA 19094
Dec 09, 2011 Housed in 7.5 x 4 x 2 in. plastic case with detachable probe, Model VM-300 operates from piezeoelectric accelerometer and incorporates charge amplifier input stage. Operation is controlled by internal microcontroller, acting under direction of 7-key membrane keypad. Powered via internal battery or external AC adapter, handheld meter includes acceleration, velocity, and displacement measurement modes. Low-voltage lockout circuit prevents meter from making erroneous readings due to low battery.

Vishay Intertechnology, Inc.    Malvern, PA 19355 2143
Dec 09, 2011 Featuring molded 50 mil pitch construction with no internal solder, HTRN Series offers 4 isolated resistors with resistance range of 1-100 kW per resistor and divider ratios from 2:1 to 100:1. Dual-in-line units feature absolute TCR of ±25 ppm/°C, TCR tracking of 5 ppm/°C, and ratio tolerances to ±0.05%. With power rating of 100 mW per element, resistors are suited for automotive applications, oil and gas exploration, aerospace engine control, and telecommunications equipment.

Kistler Instrument Corp.    Amherst, NY 14228 2119
Dec 09, 2011 Type 4550A KiTorq has bearing and slip-ring free design that consists of Type 455x KiTorq rotary torque measuring unit and Type 454x KiTorq stator torque evaluation unit. Both rotors and stators within system with same speed option may be used in any combination with one another. Stator automatically detects change in rotor and likewise sets required measurement parameters. Rotors capture torque using strain gauges, with generated signal amplified and processed at ~35 kSample.

ITT Interconnect Solutions    Santa Ana, CA 92705
Dec 09, 2011 Featuring 24-spring probe and pad contact technology, Filter Spring Probe Series extends operating life of in-the-field military equipment. Technology creates electrical contact by utilizing pressure-point force on spring-loaded pin to contact pad, instead of sliding forces found on conventional pin socket contacts. Flush with mating face of connector, contact pad on receptacle side of connector can be cleaned by wiping interface, making interconnect suited for field applications.

Electro Standards Laboratories    Cranston, RI 02921 3403
Dec 09, 2011 Certified for Cat6A compliance, Model 7371 utilizes shielded RJ45 connectors and provides 3 positions of A/B/C switching. Single-channel unit switches all 8 pins of RJ45 interface and is transparent to data speed and format. Switch position can be controlled manually via front panel pushbutton or remotely via ASCII RS232 Serial Data commands. Remote control port allows off-site monitoring and management including ability to lockout front-panel pushbutton control.

Environmental Tectonics Corp.    Southampton, PA 18966
Dec 09, 2011 Developed to address challenges of military-aided emergency and disaster response professionals, ADMS-Airbase offers interactive, multi-level training for on-scene command, field unit response, and off-scene strategic operations. Program includes incidents involving military-specific aircraft and helicopters, as well as ability to select and integrate event changing variables such as air crew, passengers, and casualties; on-board weapons systems; and weather conditions.

STMicroelectronics    Lexington, MA 02421
Dec 09, 2011 Targeting signal-conditioning applications in telecom and industrial fields, TS3011 comes in SMD package and delivers stable response time over -40 to +125°C range. Single comparator achieves propagation delay of 8 ns while consuming 470 µA supply current at 5 V. Product integrates push-pull outputs, removing need for pull-up resistor, and rail-to-rail inputs with operating voltage range from 2.2-5 V. ESD capabilities and latch-up immunity of 200 mA are also standard.

CareFusion    San Diego, CA 92130
Dec 09, 2011 Consolidating variety of clinical and research features into single, portable unit, Nicolet(TM) EEG Wireless Amplifier captures high-resolution brain wave data for diagnosis and treatment of epilepsy, brain trauma, stroke, brain tumors, and sleep dysfunction. Real-time data from amplifier can be transferred wirelessly or in tethered mode and stored in on-board memory, allowing for continuous recording when patients are out of range of monitoring computer.

ABB Inc.    Warminster, PA 18972
Dec 09, 2011 Comprising software, hardware, and services, Decathlon(TM) suite provides single view of IT, facilities, and energy management information to ensure data center reliability and energy efficiency. Functionality allows management of energy use and resources across 1-100 sites and provides real-time equipment health status. Energy consumption data is transformed into information operators can use to optimize power usage while maintaining optimal productivity.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Dec 09, 2011 Available for single-mode or multimode fiber-optic connections, N7731A dual 1x4 optical switch and N7734A 1x13 optical switch promote effective optical transceiver manufacturing tests as well as efficiency in optical component and cable verification. Optical switches can be used in fiber-optic test systems to automatically route optical signals or in automated test equipment to provide repeatability and promote throughput by supporting parallel measurements on multiport devices.