Bridgeport Fittings, Inc.    Stratford, CT 06497
Dec 08, 2011 Available in straight, 90°, and U-shaped strap-type duplex SG3838ASP versions, Whipper-Snap® Connectors for AC/MC and MCI-A cable are snap-in fittings that save time and labor with their quick-install design, are easy to remove, and are reusable. Various single and duplex configurations are available to meet diverse application requirements.

Laird Technologies    Chesterfield, MO 63017
Dec 08, 2011 Designed to circulate either water, water-glycol (anti-freeze), or transformer oil, self-contained Liquid Cooling Systems (LCS) remove heat from densely packed electronic environments by recirculating coolant to predefined temperature set point. Liquid heat exchanger systems cool to ambient, while recirculating chillers cool to temperatures below ambient. Standard heat transfer mechanisms are either liquid-to-air or liquid-to-liquid configurations.

Medit, Inc.    Winnipeg, MB R3C2B3  Canada
Dec 08, 2011 Designed to meet demands of NDT industry, SPARK utilizes LED chip combined with focal lens to produce optimal light intensity. Heat given off by LED element is evenly dispersed to surface, effectively retaining any heat internally and making inspection process more comfortable. Constructed with aluminum body and anodized finish, portable light source uses 3 AAA batteries or, in rechargeable form, NiMH, Li-ion, or alkaline for continual use.

Webtec Products Ltd    Milwaukee, WI 53235
Dec 08, 2011 Designed for testing mobile machinery with max theoretical power of over 1,500 hp, DHCR1500R Test Kit enables operator to measure flow, pressure, and temperature while simultaneously loading system using pressure loading valve. HV1500 valve, featuring built-in burst disc safety mechanism, allows operator to simulate machine circuit under normal conditions by restricting flow. With code 62 2-in. fittings, kit is rated to max of 400 gpm and 6,000 psi.

Simrit, A Div. Of Freudenberg-NOK    Plymouth, MI 48170
Dec 08, 2011 To address compatibility requirements of synthetic lubricants used in industrial gears, fluoroelastomer material 75 FKM 260466 exhibits wear resistance when in contact with synthetic oils. Uses include radial shaft seals that interact with aggressive oils in various industrial gearbox sealing applications. Developed and tested according to Six Sigma quality principles, product can extend service life, of 20,000 hr or more, and decrease downtime of industrial gear applications.

CUI, Inc.    Tualatin, OR 97062
Dec 07, 2011 Available in 20, 40, and 60 W models with footprints of 2.38 x 1.60, 3.00 x 2.00, and 4.00 x 2.00 in., respectively, VMS Series features no-load power draw of less than 0.5 W and efficiency up to 90%. Units offer universal input of 90-264 Vac and are available in 7 output voltage models ranging from 3.3-48 Vdc. Equipped with over-voltage and short circuit protections, series operates from 0-50°C at full load, derating linearly to 50% load at 70°C.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Dec 07, 2011 Suitable for front panel mounting, ACM3P Series delivers precision measurements to within 0.1 A and displays true-rms values of 2- or 3-phase mains current up to max of 100 A per phase. Line and phase currents from 480 Vac can be measured, with peak capability of 150 A. Packaged in vibration-resistant polycarbonate housing measuring 53.3 x 36.3 x 28.2 mm, series accepts universal 85-264 Vac, 47-63 Hz supply input and mounts in vertical 0U or horizontal 1U rack spaces.

Pepperl+Fuchs    Twinsburg, OH 44087
Dec 07, 2011 Suited for Zone 1 locations, wireless PowerScan M consists of transmitter and base station, with power provided by charger located in safe area. Wired PowerScan D, for Division 1/Zone 1 locations, consists of barcode reader connected via junction box to host PC, which can be located up to 150 m away in safe area. Both can capture all common 1D barcodes as well as data from dirty or damaged barcodes. Successful reads are confirmed with green LEDs and audible tone.

Eastex Products, Inc.    Holbrook, MA 02343
Dec 07, 2011 Made from Nylon with micro hook on one side and low-profile loop on other, Eastex Strap-It(TM) Cable Wrap is used for organizing and bundling optical fiber cabling that might be damaged from rigidity and over-tightening of plastic cable ties. Adjustable and reusable product, which can be quickly opened/closed hundreds of times and cut to length if necessary, comes in ½, ¾, and 1 in. wide sizes and is supplied on 25 yd rolls.

Kyocera Display America, Inc.    Plymouth, MI 48170
Dec 07, 2011 Super High Bright TFT LCDs, available with 19, 12.1, and 9.0 in. diagonals, feature respective resolutions of 1280 x 1024, 1280 x 800, and 800 x 480 and power consuption ratings of 33.2, 13.1, and 6.4 W. Each offers 1,500 cd/m2 brightness, LVDS interface, and 100K hr white LED backlighting. Largest has 800:1 contrast ratio (CR) and -80° to +80° (H/V) viewing angles, while 12.1 and 9.1 in. models respectively offer 700:1 and 800:1 CR and -80° to +80° H and -60° to +80° V viewing angles.

LDRA    Wirral CH41 5LH  United Kingdom
Dec 07, 2011 Supporting QNX® Momentics® Tool Suite and QNX® Neutrino® RTOS, LRDA Tool Suite offers complete lifecycle software testing, covering all phases of development from requirements traceability, modeling, and coding to analysis and test. Program provides extensive compliance checking for both programming and industry standards. Targeting medical, industrial safety, and automotive markets, software gives developers application feedback tailored to specific industry standards they must meet.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Dec 07, 2011 Designed to run on Infiniium 9000 and 90000 Series oscilloscopes, N6461A SD UHS-II Card Compliance Test Application provides SD UHS-II card physical-layer compliance measurements consistent with SD Association 4.0 SD card specification. Software generates HTML report at end of test, which compares results with specification test limit and indicates how closely device passes or fails each test. With program, users can debug and characterize SD designs up to 1.56 Gbps.

Omron Scientific Technologies Inc.    Fremont, CA 94555
Dec 07, 2011 Designed to eliminate threat of accidental drive-aways, DSS Dock Safety System protects dock workers by forcing safe sequence of actions to be followed. With system, loading dock door cannot be opened until trailer brakes are locked. Once trailer brake glad-hand is set, glad-hand key is released, allowing loading dock door to be opened. Compatible with all vehicle types, DSS System ensures compliance with government safety regulations, without wheel chocks or restraints.

Electrotech Sales Group, LLC.    Colmar, PA 18915
Dec 07, 2011 Assembled in USA, 120 Vac DIN rail mounted duplex receptacle outlet box provides power source in control cabinet for laptops, test equipment, lighting, and more. Product is offered in 15 or 20 A versions, both of which have external terminal block connections to facilitate wiring and are equipped with metal spring clip for secure fasting to DIN 35 mm rail. Additionally, 15 A GFCI duplex receptacle outlet box is available.

Advanced Micro Controls, Inc.    Terryville, CT 06786
Dec 07, 2011 Configured through host PLC software, Models SD31045E and SD17060E eliminate need for plug-in card and provide up to 4.5 or 6.0 Arms output current, respectively. AC line powered devices feature stepper/servo hybrid technology with built-in indexer, 3 configurable auxiliary inputs, and choice of open or closed loop control modes. In addition to Ethernet-based connectivity, drives provide encoder feedback, anti-resonance circuitry, and vari-step velocity control.

H & F Manufacturing Corp.    Ivyland, PA 18974
Dec 07, 2011 Offering versatile design and color capabilities, Multi-Wall sheets provide glazing solution that creates open atmosphere and maximizes advantages of nature while protecting against its elements. Panels blend characteristics of polycarbonate with thermal advantages of multi-wall design. As insulating sheet for roofing, siding, glazing, advertising, and other architectural functions, flame-retardant product offers controlled daylight transmission and UV blocking layer.

Elma Electronic Inc.    Fremont, CA 94538
Dec 07, 2011 Measuring 12.52 x 10.12 x 10.625 in., ATR Chassis is equipped with independent dual liquid cooled side walls and holds 6U conduction cooled boards with 1 in. pitch per VITA 48.2 and VITA 65. All-aluminum unit features COTS/MOTS modular design according to ARINC 404A. Operating from -55 to +70°C and at altitudes up to 75,000 ft, chassis is available with 6U OpenVPX backplane, which provides 7 slots, each cooled up to 100 W. VME, VME64x, VXS, cPCI and custom backplanes are also available.

Larson Electronics, LLC    Kemp, TX 75143
Dec 07, 2011 Powered by 14.3 V lithium poly battery and recharged via included 15 x 13 in. solar panel, SPLED-CL1B-M can run for 5+ hr on full charge and is mounted securely via single 100 lb grip magnet fitted into base. Unit offers 30 strobing flash patterns, allowing users to tailor operation to application requirements. Suited for use where normal power sources are unavailable, beacon is connected to solar panel and battery assembly via 20 ft of cord to allow for optimal placement.

Steinmeyer Inc.    Bedford, MA 01730
Dec 07, 2011 Measuring 105 x 151 x 25 mm, Model MT 105-50-LM provides 50 mm travel with ±1 µm straightness/flatness runout and ±0.2 µm repeatability. Anodized aluminum unit includes preloaded cross roller bearings, fixed stops, and incremental linear encoder with 0.1 µm resolution. Available as XY stage without adapter plate or configured as XYZ system with optional bracket, Model MT 105-50-LM is suited for semiconductor metrology, biomedical, miniature robotics, and laser industry.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 07, 2011 Providing both low and high limit control, Series AT23000MR and AT23000MRS Photohelic® Switches/Gauges combine differential pressure switch with analog pressure gage. AT23000MR Series employs electromechanical relays, while AT23000MRS Series uses SPST (NO) solid state relays. Compatible with air and other non-combustible, non-corrosive gases, gauges handle pressures to 25 psig. Flame-proof ATEX enclosures have glass window for viewing set point needles and process pressure.