Microscan Systems, Inc.    Renton, WA 98057
Dec 16, 2011 With C-Mount configuration, QX HAWK imager and Vision HAWK smart camera can be used with interchangeable lenses to meet many application requirements. QX HAWK barcode imager, suited for industrial track and trace applications, uses X-Mode decoding technology to read 1D or 2D marked barcodes. In addition to same decode capability, Vision HAWK offers complete vision toolset to enable full range of inspection and identification tasks. Both products have IP65/67 housing and Ethernet connectivity.

Framos GmbH    Munich   Germany
Dec 15, 2011 Comprised of CCD and CMOS image sensors with resolutions from 0.4-10.1 MP, Visiosens VFU Camera Platform offers USB 3.0 interface for transfer of data at up to 5 Gbps. Additional features include drivers; various output interfaces, mounts, and filters; and optional integrated LED ring. For all variants, user and system interface is built on unified, future-proof, cross-platform SDK based on .NET(TM) technology. Housing is designed for industrial systems as well as microscopy.

KEMPER GmbH    Vreden   Germany
Dec 15, 2011 With max payload of 3 tons, KEMPER STORATEC plate turnover device is available with loading equipment for pallet system as well as interfaces to existing storage and warehouse management systems. Operating sequence follows fully or semi-automatic process, and outsourcing/palletizing of raw material is possible at any time via process reversal. Able to accommodate automatic palletizing of laminated cores up to 3,000 x 1,500 mm, machine has max payload of 3 tons.

Beckman Coulter, Inc.    Fullerton, CA 92834-3100
Dec 15, 2011 Made using 100% premium-grade virgin polypropylene, Span-8 P50 Conductive Pipette Tips offer access to Microfuge tubes, 1.4 L storage tubes, and deep-well plates. Units feature fine point that facilitates transfer of small sample volumes characteristic of assay miniaturization. Liquid-level sensing technology in Biomek workstations allows pipetting from top of liquid rather than bottom of tube or plate, minimizing tip's exterior wetted surface and cross-contamination.

Pentek Inc.    Upper Saddle River, NJ 07458
Dec 15, 2011 Offering multichannel synchronous operation, Cobalt® Model 71670 delivers 4 independent analog outputs, each through its own digital upconverter, and 16-bit D/A with sampling rates to 1.25 GHz. On-board Xilinx Virtex-6 FPGA contains factory-installed IP that provides waveform playback for output signals up to 250 MHz. Front-panel connector accepts 5 or 10 MHz reference clock to phase lock internal VCXO. Providing 2 gigabit serial connectors, module complies with VITA 42.0 XMC specification.

Toray Plastics (America)    North Kingstown, RI 02852
Dec 15, 2011 Suitable for processing on high-speed form-fill-seal equipment, Torayfan® KMS1 70-gauge biaxially oriented heat-sealable matte film can serve as outer web in food packaging applications. Product offers low-gloss surface with optimal haze, and print adhesion layer that accepts water- and solvent-based inks commonly used on rotogravure and flexographic printing presses. Applications include salty snacks, baked goods, crackers, cookies, and confectionary items.

Maxon Precision Motors    Fall River, MA 02720
Dec 15, 2011 With 95% efficiency, 4-quadrant ESCON 36/2 DC provides drift-free, dynamic operation through 1-150,000 rpm speed range. Digital current controller can be run in various operating modes, including closed loop speed controller, open loop speed controller, and current controller. When connected to PC via USB port, unit can be configured with ESCON Studio GUI. ESCON 36/2 DC is equipped with protected digital inputs and outputs as well as adjustable current limitation for protecting motor and load.

Pepperl + Fuchs, Inc.    Twinsburg, OH 44087 2245
Dec 15, 2011 Subminiature ML4.2 Series includes models with response times as fast as 250 µsec, multibeam redundant detection, independent outputs, and zero deadband sensing. Dual sensor redundant detection can detect transparent or glossy objects wrapped in foil or plastic. Precise sensing models include one sensor with visible red emitter that senses black and white color extremes at distances up to 20 and 21 mm from sensor, respectively. Retroreflective sensing and thru-beam models are also available.

CamdenBoss Ltd    Mildenhall   United Kingdom
Dec 15, 2011 Polarized to avoid inverted connection, Minipower and Micropower series both offer single and double row connectors with up to 24 poles and fully insulated housings. Rated to 9 A, 4.2 mm pitch Minipower series comprises male and female crimp terminals fitted into respective housings to create wire-to-wire connections. By using PCB mounting headers and female housings with crimp terminals, wire-to-board connections can be achieved. Micropower connectors are 3 mm pitch and rated to 5 A.

PartMaker, Inc.    Fort Washington, PA 19034
Dec 15, 2011 Used for programming CNC Mills, Lathes, WireEDM, Turn-Mill Centers, and Swiss-type lathes, PartMaker Version 2012 delivers capabilities for visualization, simulation of vertical and horizontal machining centers, as well as process development flexibility and control. Specific capabilities, in addition to variable depth cylindrical milling and 3D surfacing strategy, include full machine simulation for milling, Set-Up Assembly Feature, and multiple process drag-and-drop selection.

Process Sensors Corp    Milford, MA 01757
Dec 15, 2011 Equipped with 2.2 in. TFT color LCDs featuring 640 x 480 pixels, PSC-IRVT Series provides video and image capture with built-in recording and playback functions. Built-in dual lasers pinpoint exact target size. Cameras work equally well with virtually any non-shiny material, but are especially effective with paper production, wood, textiles, gypsum, brick, rubber, and powders. In addition to IR temperature, PSC-IRVT Series measures humidity from 0-100% RH and ambient air temperature to 50°C.

CUI, Inc.    Tualatin, OR 97062
Dec 15, 2011 Measuring 7.8 x 5.0 x 1.5 in., chassis mount VFK600 series incorporates aluminum heat sink that allows operation at elevated temperatures with minimal air flow. Converter accepts 2:1 input voltage range, supporting 18-36 or 36-75 Vdc. For higher power requirements, isolated converters feature active current sharing up to 1,200 W and support N+1 redundancy operation. Efficiency is rated to 92%, and 5 regulated output voltage versions are available: 12, 24, 28, 32, and 48 Vdc.

Ensinger, Inc.    Washington, PA 15301
Dec 15, 2011 Made with Victrex® PEEK polymer, TECAPEEK® is available in .020 in. thickness. Slit to width rolls let user specify exact width needed for part while maximizing stamping or cutting speed. Offering chemical and heat resistance, rolls can be slit down to .25 in. and used in manufacture of high-temperature cable ties or strapping in aerospace applications where inherent low flame and smoke generation demand materials that meet stringent aircraft requirements.

PDC International Corp.    South Norwalk, CT 06854
Dec 15, 2011 Custom-engineered for cutting and perforating operations in tamper-evident banders and shrink sleeve labelers, PDC blade assemblies are manufactured from tool steels for wearability, toughness, flatness, and edge profile uniformity. Blades operate dust-free; eliminate hairs typical of spinning knife systems while delivering precise cuts for months, even under continuous, high-speed conditions; and can be re-sharpened multiple times. Double-edged (reversible) versions are available.

C&K Components    Newton, MA 02458
Dec 15, 2011 Intended for machine-to-machine applications, CCM03 and CCM04 Series Connectors meet IEC 512 certification and are resistant to shock, vibration, humidity, and extreme temperatures. Units feature 6 or 8 contacts and mechanical life of 10,000-50,000 cycles, depending on type. CCM03 Series provides max card insertion force of 3 N for fixed cover and 1 N for hinged cover with contact force from 0.25-0.50 N, while CCM04 Series has 10 N max insertion force and contact force from 0.4-0.7 N.

SIMCO Industrial & Electronics    Hatfield, PA 19440 1998
Dec 15, 2011 Available in positive and negative polarities, MCM-30 supplies voltage from 30 kV to 1 mA for charging bars/applicators used to electrostatically bond various materials. Physical size and 24 V input allow installation near applicators and charging bars, and operation can be manually switched to voltage or current mode to suit application. Resistant to shock, generator weighs less than 2 lb and is suited for direct-mounting to gantry or robot arms in automatic stack pinning processes.

Thomas & Betts Corp.    Memphis, TN 38125
Dec 15, 2011 Providing couplings, adapters, reamers, and plugs, Carlon® PVC Conduit Repair System facilitates and accelerates repair of broken polyvinylchloride (PVC) conduit. Design lets contractors maintain conduit ID, reducing repair time to less than 2 min. Available in sizes from ½-2 in., system eliminates task of chipping away and re-pouring concrete around conduit. Included nonmetallic couplings, adapters, and plugs will not rust or corrode.

API Technologies Corp.    South Plainfield, NJ 07080
Dec 15, 2011 Measuring .875 in. dia with .750 in. max length, H009 Series converts relative changes in magnetic field into electrical signal to provide position change information. Units with 4-20 mA output join existing Analog, PWR, and Serial output options. Providing 12-bit resolution with rotational life of over 100 million revolutions, sensors feature absolute linearity of ±0.1% at ambient and ±0.3% at -40 to +125°C. Special shaft, flange mounting, and gear mounting frame configurations are available.

Pfannenberg    Lancaster, NY 14086
Dec 15, 2011 Safety Integrity Level (SIL) audible and visual signaling devices utilize self-monitoring circuitry and fault-indicating contact closures to alert of failure or initiate shut down/lock out of machinery until corrective action can be achieved. With full statistical data supporting conformity to SIL 1 and SIL 2 requirements, products provide safety engineers with solutions for fulfilling their Safety Instrumented System (SIS) requirements.

Seiko Instruments GmbH    Neu-Isenburg   Germany
Dec 15, 2011 Available in SOP-8, TSSOP-8, and TMSOP-8 packages, S-25AxxxB series achieves 300,000 data writes and 50 year data retention at 125°C. Memory comes in capacities from 8k-256k bits to accommodate needs of on-board systems that control car's operation and fuel consumption while ensuring passenger comfort and safety. Products utilize low power and voltage fluctuation detection circuits to prevent errors caused by electrical noise or power variations.