Kemet Electronics Corp.    Greenville, SC 29606
Apr 04, 2013 Featuring solid internal construction for optimal shock and vibration capability, T550 Polymer Hermetic Seal Series offers capacitance from 75–120 µF and max operating temperature of +105°C. Benign failure mode makes products suited for high voltage power management applications such as buck boost converters, filtering, hold-up capacitors, and other high ripple current applications. Typical markets include alternative energy, industrial/lighting, telecommunications, and defense and aerospace.

Crystek Corp.    Fort Myers, FL 33913
Apr 04, 2013 Operating from 5,685–5,780 MHz with tuning voltage range of 0.3–4.7 Vdc, Model CVCO55CXT-5685-5780 features typical phase noise of -102 dBc/Hz at 10 KHz offset. Coaxial-based VCO exhibits output power of 0.0 dBm into 50 Ω load with supply of +5.0 Vdc and current consumption of 25 mA max. Housed in 0.5 x 0.5 in. package, USA-made device minimizes Pushing and Pulling to 1.5 MHz/V and 0.5 MHz, respectively. Second harmonic suppression is -30 dBc typical.

BIG Kaiser Precision Tooling, Inc.    Hoffman Estates, IL 60192
Apr 04, 2013 Offered in single- and 4-insert designs, BIG Daishowa R-Cutter front and back radius chamfering mill features rake angles that reduce cutting resistance and minimize burr generation. Coated carbide insert design allows for 4 indexes and is available with radii of .02–.16 in. Designed for back spot facing of cap bolt holes (sizes M6–M16), BIG Daishowa BF-Cutter features offset design and square indexable insert with 4 indexes. Coolant-through capability helps increase tool life.

Hypertherm, Inc.    Hanover, NH 03755 0010
Apr 04, 2013 Available for Kaliburn Spirit and ProLine series plasma systems, Centricut quick disconnect torches feature 2-piece torch technology that facilitates and accelerates torch switching as well as consumables changeout. Optimized gas and coolant flow promote performance and reliability. Coupler ring promotes operator grip on torch, allowing for tight connection between torch head and base, and dust seal keeps metal chips and other debris from collecting on coupler threads.

Photron USA, Inc.    San Diego, CA 92126
Apr 04, 2013 Fastcam SA-X2, 20 µm² pixel CMOS sensor can capture up to 13,500 fps at 1,024 x 1,000 (12-bit) megapixel resolution; SA-X2 Model 1000K can capture up to 1,000,000 fps at reduced resolution. Along with dual SD card storage, camera offers ability to partition available memory to accommodate simultaneous downloading and recording. Shutter time of 293 ns enables imaging of high-velocity events without motion blur, and dual-Gigabit Ethernet interface enables image download rates of 8 GB/min.

Newport Corporation    Irvine, CA 92606
Apr 04, 2013 Available in sizes from 1 x 1 ft to 3 x 6 ft, precision-grade (PG) optical breadboards feature constrained layer modal damping that minimizes torsional and bending modes. Sealed mounting aids containment and clean-up of spills or retrieval of small objects, while 3/16-inch steel triple-core interface honeycomb design helps reduce weight while promoting stiffness and dynamic rigidity. At 2 or 4 in. thick, breadboards offer surface flatness of <±0.004 in. over 2 ft².

KRAIBURG TPE Corp.    Duluth, GA 30096
Apr 04, 2013 Part of DW Series Compounds, THERMOLAST® K material used for O-ring in metal filter from EMME GI PLAST s.n.c., ensures flawless filtration of water in pipes and guarantees safe contact with drinking water. Growth of mold and bacteria is inhibited without addition of irritating or even poisonous chemicals. Available from 55 Shore A, DW Series compounds comply with all important drinking water standards, even when they are colored. In addition, thermoplastic elastomers repel dirt and lime.

Maxon Precision Motors, Inc.    Fall River, MA 02720
Apr 04, 2013 Available in short version with 0.5 W nominal power or long version with 1.0 W nominal power, EC4 Brushless DC Motor and Gearhead features speed/torque gradient of 50,000 rpm mNm-1 with continuous torque of 0.4 mNm. Unit offers options on windings and encoders as well as different reduction ratios. Applications include miniature pumps, surgical robots, diagnostic devices, endoscopes, and anywhere miniaturization is critical.

Techcon Systems    Garden Grove, CA 92841
Apr 04, 2013 Capable of producing 300 precise droplets per second, TS9200D Series Non-Contact Jet Tech Valve features single, replaceable diaphragm that eliminates dynamic fluid seals found in other jets. Diaphragm design minimizes energy needed to eject drop of fluid and is adjustable, providing users with wide process window.

Sierra Instruments, Inc.    Monterey, CA 93940
Apr 04, 2013 Featuring 4-sensor technology, QuadraTherm® 640i/780i measures flows up to 60,000 sfpm with ±0.5% accuracy. Microprocessor runs flow-measurement algorithm called qTherm™, which uses dry sensor technology and inputs from 4 temperature sensors to manage changes in gas mass flow rate, gas temperature, gas pressure, outside temperature, pipe conditions, and flow profile. Available in inline and insertion versions, flow meter has multivariable outputs and measures all non-condensing clean gases.

Peter Wolters of America, Inc.    Des Plaines, IL 60016
Apr 04, 2013 Based on Moving-Wheel-Head concept, Micron Macro Machine is designed for Creep Feed-Profile and High Efficiency Deep Grinding. All linear movements are performed by grinding head, providing optimum force distribution with minimal thermal variation. Torque tube design guarantees vibration dampening and thermal stability. Available with different spindle speeds and power ranges to match application, Micron Motion can be automated with robotic loading and unloading.

Omega Engineering, Inc.    Stamford, CT 06907
Apr 04, 2013 Suited for water treatment, air/environmental control, and machine shops, WSS stainless steel AC motors come in TEFC enclosure and sizes from 1/3–2 hp. These 3,600 and 1,800 rpm motors, rated from 208 to 230/460 V, have 1.15 service factor and Class F insulation. Construction includes windings doubled-dipped and cured in polyester insulating varnish, anti-rust coating, double-lip seals, and V-ring shaft slingers. These 3-phase, industrial-grade, washdown-duty motors.

Volvo Penta Of The Americas, Inc.    Chesapeake, VA 23320
Apr 04, 2013 Automatic start/stop option for Volvo Penta industrial diesel engines can achieve fuel savings of 5% or more by switching engine off when idling and consequently helps reduce emissions and noise. When machine's engine idles, this option turns engine off after pre-set time (usually 5–10 sec). Engine starts immediately when driver activates any of machine's controls, and work can continue. Start/stop capability can be deactivated or reactivated as needed.

Custom MMIC    Westford, MA 01886
Apr 04, 2013 Housed in RoHS-compliant 3 x 3 mm QFN plastic package, Model CMD158P3 delivers 20 dB of gain with +20 dBm of saturated power while requiring +5 V supply at 95 mA. Input and output ports are DC blocked, and amplifier does not require any off-chip tuning components. Offering alternative to hybrid amplifiers, Model CMD158P3 is suited for point-to-point and point-to-multipoint radios, VSAT, mixer LO chains, and military EW applications.

Extreme Engineering Solutions (X-ES)    Middleton, WI 53562
Apr 04, 2013 Suited for environmentally challenging and space-constrained situations, maintenance-free XPand6103 supports Rugged COM Express™ modules, such as XPedite7450, that integrate Intel® Core™ i7 and Freescale QorIQ™ processors. Features include internal 64 GB Slim SATA SSD memory module, rugged and environmentally sealed M12 connectors, and diverse I/O options. With 3 internal PCIe Mini slots and support for 2 external antennae, PC also offers flexible array of additional I/O configurations.

Tripp Lite    Chicago, IL 60609
Apr 04, 2013 Offering up to 97% efficiency rating, models SU80KX2, SU100KX2, and SU120KX2 protect critical systems and eliminate downtime in high-density applications. Scalable capacity – up to 120 kVA for individual UPS or 480 kVA for up to 4 units in parallel – and expandable battery runtime accommodate infrastructure growth. While internal N+1 modularity provides fault redundancy, on-line double conversion operation delivers pure sine wave output and isolates equipment from power problems.

TSI, Inc. Environmental Measurements & Controls Div.    St. Paul, MN 55164
Apr 04, 2013 Based on laser-induced breakdown spectroscopy (LIBS) and designed for laboratory use, ChemReveal LIBS Desktop Analyzer serves those who need to identify materials and chemical composition of solids. Users can directly identify and analyze range of elements in virtually every matrix of solid sample. Solution comes with ChemLytics™ software and provides simultaneous characterization of organic, light, and heavy elements of solid samples without cumbersome or hazardous sample preparation.

Hypertherm, Inc.    Hanover, NH 03755 0010
Apr 04, 2013 Intended for PerCut 210M and 450M torches found on Kjellberg HiFocus systems, Centricut consumables, at 280 A, optimize cut quality throughout their life due in part to SilverLine electrode and CoolFlow nozzle technologies. SilverLine technology features hybrid copper/silver weld joint that delivers performance equal to solid silver electrode. CoolFlow technology optimizes cooling to help maintain size and shape of nozzle orifice for extended life.

Honeywell International    Houston, TX 77014
Apr 04, 2013 Facilitating wireless technology deployment and operation, OneWireless™ Network Release 210 offers over-the-air (OTA) field device provisioning, Gateway General Client Interface (GCI), and native integration of OneWireless field networks into Honeywell Experion® Process Knowledge System. GCI feature, enabled by ISA100 standard, lets operations continue using legacy protocols and proprietary applications while aiding process of wirelessly expanding those applications throughout plant.

Gehl Co.    West Bend, WI 53095
Apr 04, 2013 Driven by 74.3 hp Tier IV-compliant Deutz turbo-diesel engine, Model RT250 delivers up to 243 lb-ft of torque, up to 14,317 lb of tractive effort, and lift height of 128 ½ in. Loader features Automatic Track Tensioning System that eliminates need for manually tensioning tracks before operation. By sensing machine load electronically, AntiStall technology continuously monitors and adjusts hydrostatic drive pump displacements to manage available engine horsepower and torque.