Crouse-Hinds Molded Products    La Grange, NC 28551 0156
Jul 26, 2002 Exactraâ„¢ Series lighting panelboards can be used in indoor and outdoor areas made harmful by presence of flammable gases and vapors and combustible dusts. Boards are offered in either LP1 or LP2 model for Class I, Division 1 or 2 hazardous locations, respectively. They are available with up to 6 GFI and/or EPD branch breaker spaces within same panel. Each panelboard is cast in copper-free aluminum case and sealed with neoprene gasket.

Porta-King Building Systems    Earth City, MO 63045 1211
Jul 26, 2002 Revenue Control Building features heavy-duty 1 3/4 in. thick aluminum sliding doors and laminated hook-bolt lockset with master-key cylinder. Transaction window slides horizontally on stainless steel, ball-bearing rollers and measures 38 in. from top of concrete pad. Additional safety options include security screens, roll-down shutters, through-wall transaction drawers, exterior lighting systems, and bullet-resistant construction.

Norstat, Inc.    Rockaway, NJ 07866
Jul 26, 2002 Plug-In Distribution Boxes are available in 4, 6, or 8 position models, offering common ground as well as negative and positive wires. Multiple inputs or outputs can be realized from one box with one cable. Two versions are available; 4-pin with 1 wire to each connector or 5-pin with 2 wires to each connector, which allows use with N/C and N/O switches. Box construction is heavy-duty plastic with IP67 rating and temperature range of -20 to +90°C.

Telog Instruments Inc    Victor, NY 14564
Jul 26, 2002 WLS-31 samples level fluctuations as fast as 4 times per second or as slow as every 8 hours. Up to 80,000 data values may be collected and downloaded to laptop computer running Telogers for Windows® software or Telog Palm Data Transfer Unit. System is constructed of 316 stainless steel and polyurethane cable. It is offered with PT-10b strain-gauge, differential-pressure sensor with selectable range of 5, 10, and 15 psi.

Marubeni America/NTC Laser Group    Southfield, MI 48075
Jul 26, 2002 HFN-R40H fixed column HMC drills deep oil holes in steel crankshafts with depth-to-diameter ratios greater than 16:1, at speeds up to 24 ipm. It uses just 2 oz of cutting fluid/hour. HFN-P40H traveling-column machine achieves traverse rates up to 2,950 ipm. Minimum Quantity Lubrication (MQL) system delivers mixture of air and oil droplets to workpiece through conventional tools with coolant channels. Fluid quantities are programmed for each individual operation.

ID Technology Corp.    Fort Worth, TX 76106
Jul 26, 2002 Model 250 uses thermal transfer technology to print and apply variable information labels with print speeds up to 12 in. per second and print resolution up to 300 dpi. It can be mounted for top, bottom, or side label application and is available with Zebra, Datamax, or Sato print engines. Conserve Air option shuts off airflow to applicator when it is not needed. Status menu allows operator to view machine's set-up configuration for troubleshooting.

Banner Engineering Corp.    Minneapolis, MN 55441
Jul 26, 2002 PICO-GUARD combines controller; various plug-in, snap-lock optical safety interlock switches; and plastic fiber optic cable to monitor doors, gates, and hard guards. Controller includes 4 separate optical channels, each able to control multiple optical safety interlock switches in same network. When system detects break in optical beam, it provides stop signal to machine control circuit to protect personnel. System meets ISO 13849-1 (EN954-1) Category 4 requirements.

Filamatic    Baltimore, MD 21215
Jul 26, 2002 Digifil In-Line modular filling system handles fill volumes from .1 ml to gallons. Fluid capabilities include free flowing, viscous, and molten products. Designed for tool-less changeover, system features menu-based control system that automatically reconfigures filler operations across variety of parameters. Dockable Clean-In-Place and Cleanamatic(TM) automated options simplify clean up.

Sandvik Coromant Co.    Fair Lawn, NJ 07410
Jul 26, 2002 CoroMill 590 Century segmented face mill works safely up to 40,000 rpm in 40 mm diameter size. Serrated inserts mate with seat pockets to locate cutting edges with repeatable accuracy, and to lock inserts safely in place. Fixed-pocket, square-shoulder face mill features axial micro-adjustment capability. It comes in diameters from 2.0 to 8.0 in. and 40 to 200 mm. Maximum rated speeds range from 15,700 to 41,600 rpm, depending on diameter and coupling.

Edmund Optics    Barrington, NJ 08007
Jul 26, 2002 Variable frequency Optical Chopper utilizes Dual Phase Lock-In Amplifier to allow greater offset before saturation of gains settings. Blades are 102 mm diameter, chemically blacked, photo-etched discs that allow for operation frequency range of 5 Hz to 20 kHz. They come in 2, 5, 10, 30, and 200 slots. LED display provides direct read-out of chopping frequency, which is set by adjusting 10-turn dial or by applying and external, BNC control input.

Maxwell Technologies, Inc.    San Diego, CA 92123
Jul 26, 2002 Model 29F0408 high-density 32 Mb FLASH memory is qualified for use in space environments. Its contents are not erased when power is turned off or is disconnected, classifying it as non-volatile. Memory is radiation characterized for both SEL and SEU, and when packaged in Rad-Pak® provides greater than 100 krad radiation dose tolerance in typical GEO orbit. Applications include solid state recorders, digital voice recorders, and other mass storage.

Ideal Industries, Inc.    Sycamore, IL 60178
Jul 26, 2002 320 Series contractor-grade digital multimeter (DMM) is available in three designs, consisting of model numbers 61-320, 61-322, and 61-324. Each offers min/max/average recording, True-RMS, and capacitance capabilities. Series is rated CAT III (1,000 V) or CAT IV (600 V), and offers audio continuity, diode testing, frequency, auto/manual ranging, data hold, and auto power off. Model 61-324 comes with RS-232 interface and software.

Technovation Systems, Inc., Technovation    Midlothian, VA 23112
Jul 26, 2002 Series 1000 HEPA filter system enables 60% lower pressure drop than conventional 12 in. deep HEPA filters. Compact filters are available for standard Air Handling Units as well as separate housings (with or without fans). Series 1000 HEPA filter has pressure drop rated at 0.5 in. WC at 2400 scfm in standard filter size of 24 x 24 x 11.5 in.

ADLINK Technology Inc.    Irvine, CA 92618
Jul 26, 2002 Model cPCI-8168, 6U CompactPCI, 8-axes motion control card can integrate into 6 systems cards. Hot swappable features allow maintenance without affecting live systems. It offers differential input/output signals, command output options (DIR/OUT and CW/CCW), and various operation modes. Additional offerings include incremental encoder interface, 28-bit counter, and software drivers. Card is suitable for electric assembly and semiconductor machinery applications.

Viking Corp., The    Hastings, MI 49058 9706
Jul 26, 2002 SureFireâ„¢ non-cycling preaction system offers built-in features that ensure protection while preventing water from entering system. It operates as regular preaction system under normal conditions or as dry system if primary and backup power fail. Available with single- and double- interlock electric release in 1 1/2 to 8 in. sizes, SureFire consists of angle-pattern or straight-through Deluge Valves, EZ Trim, Easy Riserâ„¢ check valve, and Par-3 Release Control Panel.

Key Technology, Inc.    Walla Walla, WA 99362
Jul 26, 2002 CentriFlow continuously and precisely measures weight of flowable bulk solid products and reports flow rate or totalized data to plant control systems. Accurate within 0.25% and unaffected by material density changes or flow pulsation, meter has no moving parts, and does not require repeated calibration. CentriFlow handles products with bulk densities from 1-100 lb/ft³, and flow rates ranging between 0.7 and 60 ft³/min.

APTech LLC (Applied Process Technology, Inc.)    Cincinnati, OH 45215
Jul 26, 2002 Solid-Concentrates reduce hazardous spills, and eliminate environmental dangers involved in disposing of empty drums. They integrate with existing pumping and testing systems using fail-safe, dual-solenoid dissolving unit, which attaches to wall and dissolves 1 gal of Solid-Concentrate at a time. Dissolving process completely washes each container; container can then be disposed of with regular waste or recycled.

Asyst Technologies, Inc.    Fremont, CA 94538
Jul 26, 2002 Axysâ„¢ FastSwap atmospheric robot uses dual-yaw wrist architecture enabling wrist/end effectors to rotate 360° and operate independently of each other. It can be used for cassette transfer applications, handling 2 wafers at same time and reducing time required to transfer load of wafers from 1 cassette or front-opening unified pod to another. FastSwap design supports both vacuum and edge-grip types of end-effectors. Robot can operate in stand-alone or track configurations.

Nikon, Inc. Instrument Group Div.    Melville, NY 11747
Jul 26, 2002 NRM-3000 provides automatic measurement of overlay and NSR focus marks. Illumination system is bright and optically matched to imaging system. It employs fiber optic delivery system to quartz-halogen lamps. System utilizes actively damped stage and EGA alignment control technology to assure correct measurements. Software offers recipe management functions. Waferless recipe creation offers automatic recognition of stepper alignment marks and other unique patterns.

Applied Data Systems, Inc.    Columbia, MD 21046
Jul 26, 2002 Graphics Master System can act as USB client or host and supports wide range of communications protocols allowing customers to fully utilize features found in Windows CE .NET. Windows CE .NET provides seamless integration into wireless connectivity, Web Services and .NET enterprise solutions. It is suitable for low-power and mobile applications.