Jergens, Inc.    Cleveland, OH 44110
Oct 01, 2002 Machine vises, available in two styles, provide jaw widths of 4 or 6 in. Twin station and MonoQuad (eight station)style designs feature fully machinable soft jaws and hardened and ground steel guideways. Mounting options include gooseneck adjustable strap clamps or Jergens Jigsawâ„¢ Interlocking Plate Fixturing System which optimizes productivity of machining centers by maximizing number of vises (and work pieces) on production run.

T & S Equipment Co.    Angola, IN 46703
Oct 01, 2002 Overhead Door Guard is designed with tubular steel sides and wooden top beam. It is made to stop fork truck or other traffic going through doorway before overhead door is hit. Guard is easily mounted to floor and is painted with safety yellow finish. It can be made to fit most door sizes.

Kerk Motion Products, Inc.    Hollis, NH 03049
Oct 01, 2002 NTB Series anti-backlash lead screw assembly is offered with flange or thread mounts. Custom nuts can be machined or molded in variety of shapes and sizes, from miniature nuts less than 3/8 in. dia to multi-function molded components with integrated nut. Manufactured with self-lubricating acetal, nut is designed to run on precision rolled shafting. Screws are 303 stainless and are available with TFE coating eliminating need for external lubrication and maintenance.

B & K Precision Corp.    Placentia, CA 92870
Oct 01, 2002 PC Compatible Model 844A has 3,628 device library and offers 40-pin DIP Zero Insertion Force Socket (both 300 and 600 mil). It also provides 1.8 V low-voltage device compatibility and Windows control program with pull-down menus. Able to perform Read, Blank Check, Program, Verify, and Erase commands, Model 844A also includes Buffer features such as Random Data Fill, Copy/Move/Swap Block, Buffer print, Find/Replace Text, and 8- and 16-Bit view modes.

Mahr Federal Inc.    Providence, RI 02940
Oct 01, 2002 With traversing length of up to 4.72 in., MarSurfâ„¢ LD 120 utilizes single drive unit and laser interferometer. System includes PC with data acquisition card and menu-driven, Windows-based software. Using triangular support design, LD 120 incorporates tracing arm with .394 in. range and magnetic tracing arm mounts. It uses 2 µm (80 µin.) radius diamond stylus tip and provides ratio of measuring range to resolution of 1.25 million to 1.

Progressive Machine Co., Inc.    Ringwood, NJ 07456
Oct 01, 2002 Model MS 103-LD PMC, with dual spindle design, winds continuous lengths of difficult profile products. Both spindles operate through common dancer system to minimize change-over from full to empty spool. Accu-Wind manages machine functions/winding patterns, insuring precise placement of successive layers while maintaining tension and pitch controls. Line speed is rated to 500 FPM, package width and winding diameter is up to 16 in., and package weight is up to 60 lbs.

Garon Products, Inc.    Wall, NJ 07719 1924
Oct 01, 2002 Able to withstand constant fork lift and other heavy traffic, Tigershieldâ„¢ self-leveling formula is suitable for use on spalled and damaged concrete. Application requires users to pour product on and squeegee out to smooth surface. Thick coating gets into cracks and creates seamless flooring, impervious to dirt and bacteria. System withstands exposure to chemicals and heavy abrasion, complies with OSHA regulations, and is VOC compliant.

Molded Fiber Glass Tray Co., A Div. Of Molded Fiber Glass Companies    Linesville, PA 16424
Oct 01, 2002 ElastoStatMat static dissipative elastomer material is used in ESD trays, which cushion products and eliminate need for tape, glue, adhesive, or separate rubber mats. Trays meet or exceed ANSI/ESD S2020 standards. Operating temperature range is -40 to +200°F and static load is greater than 200 lbs. Elastomer material features tear and cut resistance, will not abrade, and is impervious to damage from leaded components. Standard size is 26 x 18 x 1 in.

seepex, Inc.    Enon, OH 45323
Oct 01, 2002 Progressive Cavity Pumps are designed for metering NaOCI, FeCI₃, H₂SO₄, NaOH, HCI and strong acids and bases. Pump bodies are constructed of HDPE or cast metal with Halar® linings. Wetted rotating parts can be constructed of AISI 316ti, duplex stainless steel, Hastelloy®, or titanium. Pumps do not pulsate and can be fitted with variety of variable speed drives. They do not need pulsation dampeners or pressure regulators, will not gas or vapor lock, and have low NPSHR.

Krylon Diversified Brands    Cleveland, OH 44115
Oct 01, 2002 Tough Coat® aerosol paints have fan-shaped spray pattern for maximum coverage. With turn of nozzle insert, EZ TOUCH® FANSPRAY® Nozzle pattern goes from vertical to horizontal. High-solids coverage is combined with tough protective coating that resists chipping and peeling. Paints come in Acrylic Alkyd Enamel, Fluorescent, and High-Heat types. They are appropriate for light to heavy-duty painting projects, indoors and outdoors.

Proper Storage Systems, Inc.    Seguin, TX 78155
Oct 01, 2002 Powered roll-out shelves are designed for storing molds, dies, fixtures, and other heavy, hard to maneuver items. User rolls out shelf, picks up item with overhead crane, and moves it directly into area where needed. Custom sizes are available with capacities up to 40,000 lbs per shelf.

Firetrace International    Scottsdale, AZ 85260
Oct 01, 2002 Firetrace® Fire Suppression System requires no electricity or external power. Polymer tubing can be routed anywhere within engine compartment. When exposed to open flame, tubing ruptures, dispensing entire contents of cylinder containing fire-suppression agent such as FM-200®, C0₂, dry chemical powders, and foam. System is totally self-contained and helps prevent extensive vehicle damage. It is suitable for enclosed spaces within vehicles of 250 ft³ or less.

Slaughter Co. LLC    Ardmore, OK 73401
Oct 01, 2002 Series 2900 consists of three models: Model 2925 12 mA, 5 KVac hipot tester; Model 2935 12 mA, 5 KVac hipot and 5 mA, 6 KVdc hipot tester; and Model 2945 which provides 3-in-1 functionality including 12 mA 5 KVac hipot, 5 mA 6 KVdc hipot, and built-in insulation resistance tester with test range of up to 1,000 Megohms. All include microprocessor control, LCD, electronic ramp and dwell, test setup memories, and PLC remote control.

Orion Research, Inc., A Sub. Of Thermedics, Inc., A Thermo Electron Co.    Beverly, MA 01915-6199
Oct 01, 2002 Model 925 Flash Titratorâ„¢ utilizes nanotechnology for rapid Acid/Base titrations with no external titrant. It employs 12 mm probe which features independent ph FET, planar conductivity and temperature sensors, plus platinum electrode surrounded by pH sensor that electrochemically generates acid or base titrant from sample itself. Twelve acid and base titration templates are coded into meter, and 30 actual sample methods are also included.

Bludot, Inc.    South Bend, IN 46628
Oct 01, 2002 Models TA-7000 and TA-8000 Anti-Lock Brake Actuating System Kits fit variety of commercial-duty 1, 2, and 3 axle trailers (weighing up to 45,000 lbs). Electronic control unit relay valve monitors movement of each sensored wheel, thereby modulating air pressure on trailer brakes for sure, controlled stops. Kits are suitable for short run installation and situations where component customization, universal fit, and quick turnaround are required.

Yaskawa Electric America, Inc.    Waukegan, IL 60085
Oct 01, 2002 Available in open chassis models from 1/8 to 5 hp at 230 Vac and 1/2 to 5 hp at 460 Vac, Model J7 incorporates digital operator with 3-digit LED status display and analog speed potentiometer. Up to 4 multifunction inputs can be programmed to access 9 preset speeds. With digital programming that covers 79 parameters, J7 also offers one analog input, multifunction output, and analog output. Drive provides DC injection braking and accel/decel time selection.

Huot Mfg. Co.    St. Paul, MN 55104-1701
Oct 01, 2002 Tooling dispenser can be added to pre-existing workbenches as under-mount drawer, allowing users to store materials to avoid clutter in their workspace. Drawer provides up to 75 compartments to organize various tooling. Measuring 26 1/8 x 12 1/2 x 3 in. (W x D x H), it comes with built-in cam-lock. Equipped with heavy-duty ball bearings, drawer slides smoothly during opening and closing. Drawer is also available with marking for three drill types.

Tru-Connector Corporation    Peabody, MA 01960 5099
Oct 01, 2002 TRU BMA connectors fit cables with tape-wrapped Teflon® and foamed polyethylene dielectrics. Push-on SMA interface is suitable for dense modular connector arrays. BMA connectors fit semi-rigid cable sizes from .0865 to .141 in. and flexible cables from .190 to .24 in. with crimp and solder attachment. Providing positive alignment interface with minimal insertion force, TRU BMA Series Connectors accommodate maximum .060 in. axial and ±.020 in. radial misalignment.

Filtration Technology Corporation    Houston, TX 77041
Oct 01, 2002 Equipped with segregated flow channels and flow chambers, 940 Series PLATINUM pleated cartridge filters provide reduced operator exposure. Available in cellulose, glass, polypropylene, and polyester media, 940 PLATINUM filters can be customized to fit particular processes or conditions. Constructed with 12.75 in. OD, their metal cores and caps make them suitable for high-temperature and high-pressure applications.

Crescent Lighting/ Genlyte - Thomas Group LLC    Barrington, NJ 08007
Oct 01, 2002 Model GP2 offers hemmed sides, unitized body construction, and hemmed and true mitered door frame with T-hinges. With no sharp edges, it can be installed and re-lamped without cutting or scraping installer. Low-profile GP2 is 3 in. deep and is designed around T-8 lamp and electronic ballast combination. Its multiple tabs provide additional support to prevent end caps from buckling.