Dematic Corp.    Grand Rapids, MI 49505
Oct 07, 2002 Easy Step(TM) Paced Work Platforms are floor-mounted, recessed-belt conveyors, designed to convey production workers, their tools and supplies, at same speed as main assembly line. They have steel frame and pulleys, adjustable, cushioned floor supports, debris catch basin, and automatic boot-activated safety stop. Oil-resistant, non-slip belt materials are available to match applications. Sizes range from 18 to 102 in. wide, 10 to 72 ft long, and 7.5 in. high.

Applied Data Sciences, Inc.    Dallas, TX 75381 4209
Oct 07, 2002 DAQPOD combines digital thermometer, hygrometer, and barometer in handheld, 9 V battery-powered unit. It reads and sends real-time, polled weather sensor data via serial port when requested by laptop or desktop computer. ASCII commands poll sensors using programs such as Procomm or Hyperterminal. Included software allows upload of sensor readings. It also calculates air density, density altitude, dew point temperature, and water vapor percentage.

Setra Systems, Inc.    Boxborough, MA 01719
Oct 07, 2002 Model 227INT can be configured with 1.125 in. Down-Mount C seal or W seal interfacing base. C seal pressure fitting and small swept sensor chamber utilize VAR 316 stainless steel electropolished to 5 Ra finish, which eliminates particle entrapment. Transducer is available with 5 Vdc, 10 Vdc, or 4 to 20 mA output with ±0.25% of Full-Scale or ±1.0% of Reading accuracy. Pressure ranges are from –14.7 or 0 to 25 psi up to 0 to 3000 psi in gauge, absolute, or compound pressure.

Adept Technology, Inc.    San Jose, CA 95134
Oct 07, 2002 Configurable kits consist of linear track, mounting bracket, and cable track. Able to integrate with tabletop SCARA and 6-axis robots with SmartControllerâ„¢ and SmartServoâ„¢ control architecture, kits allow one robot to service two or more assembly/material handling stations. Based on SmartModules and SmartServo technology, kits are also equipped with IEEE 1394-based SmartServo communication interface kit.

Leuze electronic, Inc.    New Hudson, MI 48165
Oct 07, 2002 Model DDLS 200 contactless data transmission unit works over distance up to 300 m. It comes ready to work with Allen Bradley DH+/RIO, Profibus and interbus interfaces. Dimensions of 90 x 190 mm allow for mounting in almost any position, and Single Hand Adjustment system allows one person to adjust light beam with high degree of accuracy. DDLS 200 is suited for logistics applications since it can communicate with virtually any machine that has PLC.

Schrader Bellows    Cuyahoga Falls, OH 44221
Oct 07, 2002 The F3 Series air control valves are available from Schrader Bellows Pneumatic. This product line provides leak free performance in pneumatic applications and reduces overall inventory cost. The F3 Series features an aluminum extruded body to provide precise porosity free sealing surfaces. The valve’s unique "Loose Seal" design gives the advantage of a wear compensating, pressure loaded bi-directional seal with narrow band contact that is self-compensating. This combination assures long life and leak-free performance. The F3 Series also features plug-in subbase or manifold mountings, which means the same valve body can be used in individual or ganged applications.

Assembled Threading Tools Div., Greenfield Industries    Augusta, GA 30903
Oct 04, 2002 Model 4MxR solid carbide end mill combines roughing and finishing in one tool. Features include shallow, flat, profile; high helix, multi-flute geometry; corner radius; and center flute cutting. It is designed for maximum metal removal when milling steels, hard steels, titanium and nickel-based alloys, and other hard materials 50-60 Rc.

Labsphere, Inc.    North Sutton, NH 03260 0070
Oct 04, 2002 Fully automated OPTRONIK SMS-10H measures automotive and general vehicle lamps in accordance with DIN, CIE, SAE, JIS, and KS standards. It includes motorized table with 2 rotational axes and 3 linear axes for precise positioning of test samples. Built-in alignment laser facilitates sample positioning to ensure repeatable measurement. OPTO software provides graphical interface with menu driven controls for data acquisition, display, and analysis.

Telco Intercontinental Corp.    Houston, TX 77095
Oct 04, 2002 Maintenance-free IPM Brushless AC Motors are offered with standard speeds of 2000, 3000, and 6000 rpm. Optional speeds are available to 8000 rpm. Motors offer low temperature rise with no cooling fan and do not have carbon or electric flash. Low EMI is compatible with European CE standard.

Renco Encoders, Inc.    Goleta, CA 93117
Oct 04, 2002 Available with resolutions up to 2048 lines, model RCM15, 1.5 in. dia rotary optical encoder combines brushless motor commutation pulses and incremental position feedback. Offerings include company's slide/gap mechanism and one LED. Built-in servo groove allows ±20° rotation of encoder to align commutation tracks with motor poles. Encoder provides commutation for 4-, 6-, or 8-pole brushless motors.

ATOFINA Chemicals, Inc.    Philadelphia, PA 19103-3231
Oct 04, 2002 Solarkote® H resin enhances appearance of high impact polystyrene sheet (HIPS) via co-extrusion. Cap layer of 6 to 12 mil provides protection from ultraviolet light, without sacrificing impact performance of composite sheet. Co-extruded layer is inherently colorless, but may be readily colored. It maintains high visible light transmission, permitting wet appearance. Applications include tub/shower surrounds, building trim and shutters, and lawn and garden equipment.

Milamar Coatings LLC / PolyMax    Oklahoma City, OK 73120
Oct 04, 2002 PolyMax DCS consists of high solids epoxy primer/sealer into which blend of vinyl chips is distributed to leave granite looking surface. Surface is sealed with chemical and UV resistant gloss lock coat and finish. PolyMax is non porous, has no grout joints and can be installed with smooth or textured finish. It can be made slip resistant for wet environments, and offers low maintenance, abrasion resistance, and resistance to most food and automotive liquids.

CertainTeed Corp.    Valley Forge, PA 19482-0860
Oct 04, 2002 ToughGardâ„¢ with Enhanced Surface repels moisture, but has breathable surface coating that preserves sound-dampening performance by allowing sound waves to pass through open-cell structure and into sound-absorbing glass fiber mat. Air stream surface contains EPA registered antimicrobial agent to reduce potential of microbial growth. Product provides resistance to tearing, puncturing, and surface wear during installation and cleaning.

THK America, Inc.    Schaumburg, IL 60173 5340
Oct 04, 2002 Type RDM Model M Linear Motor Actuator virtually eliminates attracting force associated with core motors. Thrust rod consists of magnets encapsulated in stainless steel tube. Movable carriage encases coils. If shaft center is offset, almost no effect is made on thrust. Extruded-aluminum base has single, Type SHW shaft.

Thermadyne Industries, Inc.    St. Louis, MO 63017
Oct 04, 2002 CUTMASTER(TM) 100 features PCH-102 SureLok® torch with MaximumLife(TM) electrode. Highly visible arc makes it easy for operator to see and control. IGBT variable power supply delivers up to 80 A of cutting current. Extended torch tip and streamlined shield cup allow beveling at angles up to 45 degrees. Tip Saver(TM) current fold-back circuit prevents tip failure that can result when tip touches work at high output current levels.

Control Co.    Houston, TX 77258 8307
Oct 04, 2002 Traceable® Digital Meter continuously and simultaneously displays relative humidity and temperature in °F/°C with dual-recall memories. Minimum and maximum memories may be displayed or cleared at any time. Temperature range is 32 to 122°F and 0 to 50°C, with resolution of 1° and accuracy of ±1°C. Humidity range is from 25 to 95%, with 1% RH resolution. Accuracy is ±2% RH mid-range to ±4% RH elsewhere. Individually serial-numbered NIST Traceable Certificate is supplied.

Trelawny Pneumatic Tools    Malvern, PA 19355
Oct 04, 2002 Breaker, with 5 ft handle, removes ceramic tile, thin set mortars, and other difficult materials. Lower grip on handle can be adjusted to comfortable position. Breaker features 2 in. stroke combined with 2 in. bore for difficult scraping and chipping applications. Air consumption is 20 scfm @ 90 psi. Chisels are available in 1, 2, and 3 in. wide sizes. Single-ball retainer provides quick tool change and positive, safe lock.

Plastic Safety Systems, Inc.    Cleveland, OH 44120 0140
Oct 04, 2002 UV-protected polyethylene NITE LITE and NITE II each provide 3 reflective stripes for awareness on trouble roadways. International orange, with white and orange reflective stripes, as well as black, with yellow reflective stripes for dangerous installations, are available. Standard roll size is 4 x 50 ft. Applications include utility poles close to traffic, construction projects near roads, and pedestrian or vehicular traffic.

BEE International, Inc.    South Easton, MA 02375
Oct 04, 2002 DeBEE® Ultra High-Pressure Homogenizer, with fully modular, Next Generation(TM) Homogenizing Cell, has dual-jet system. Using fluid-against-fluid technique, dual-jet system has 2 high pressure fluid inlets and option to introduce third material into high-intensity stream. Using intensifiers which provide continuous smooth flow up to 45,000 psi, uniform nanoparticles with narrow D90 can be achieved. Unit is scalable to production quantities in thousands of liter per hour range.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Oct 04, 2002 Model VS1 detects both under- and over-vibration conditions. Weighing only 12 oz, unit adds little mass to machine vibration being measured to improve sensing accuracy. Monitor has cast-aluminum NEMA 4x enclosure. Range of vibration velocities can be adjusted from 0.10 to 2.20 in./sec rms, with set-point delay that can be adjusted from 1 to 10 sec to prevent false trips. Unit detects velocities in frequency band from 10 to 1,000 Hz.