Milamar Coatings LLC / PolyMax    Oklahoma City, OK 73120
Oct 04, 2002 PolyMax DCS consists of high solids epoxy primer/sealer into which blend of vinyl chips is distributed to leave granite looking surface. Surface is sealed with chemical and UV resistant gloss lock coat and finish. PolyMax is non porous, has no grout joints and can be installed with smooth or textured finish. It can be made slip resistant for wet environments, and offers low maintenance, abrasion resistance, and resistance to most food and automotive liquids.

CertainTeed Corp.    Valley Forge, PA 19482-0860
Oct 04, 2002 ToughGardâ„¢ with Enhanced Surface repels moisture, but has breathable surface coating that preserves sound-dampening performance by allowing sound waves to pass through open-cell structure and into sound-absorbing glass fiber mat. Air stream surface contains EPA registered antimicrobial agent to reduce potential of microbial growth. Product provides resistance to tearing, puncturing, and surface wear during installation and cleaning.

THK America, Inc.    Schaumburg, IL 60173 5340
Oct 04, 2002 Type RDM Model M Linear Motor Actuator virtually eliminates attracting force associated with core motors. Thrust rod consists of magnets encapsulated in stainless steel tube. Movable carriage encases coils. If shaft center is offset, almost no effect is made on thrust. Extruded-aluminum base has single, Type SHW shaft.

Thermadyne Industries, Inc.    St. Louis, MO 63017
Oct 04, 2002 CUTMASTER(TM) 100 features PCH-102 SureLok® torch with MaximumLife(TM) electrode. Highly visible arc makes it easy for operator to see and control. IGBT variable power supply delivers up to 80 A of cutting current. Extended torch tip and streamlined shield cup allow beveling at angles up to 45 degrees. Tip Saver(TM) current fold-back circuit prevents tip failure that can result when tip touches work at high output current levels.

Control Co.    Houston, TX 77258 8307
Oct 04, 2002 Traceable® Digital Meter continuously and simultaneously displays relative humidity and temperature in °F/°C with dual-recall memories. Minimum and maximum memories may be displayed or cleared at any time. Temperature range is 32 to 122°F and 0 to 50°C, with resolution of 1° and accuracy of ±1°C. Humidity range is from 25 to 95%, with 1% RH resolution. Accuracy is ±2% RH mid-range to ±4% RH elsewhere. Individually serial-numbered NIST Traceable Certificate is supplied.

Trelawny Pneumatic Tools    Malvern, PA 19355
Oct 04, 2002 Breaker, with 5 ft handle, removes ceramic tile, thin set mortars, and other difficult materials. Lower grip on handle can be adjusted to comfortable position. Breaker features 2 in. stroke combined with 2 in. bore for difficult scraping and chipping applications. Air consumption is 20 scfm @ 90 psi. Chisels are available in 1, 2, and 3 in. wide sizes. Single-ball retainer provides quick tool change and positive, safe lock.

Plastic Safety Systems, Inc.    Cleveland, OH 44120 0140
Oct 04, 2002 UV-protected polyethylene NITE LITE and NITE II each provide 3 reflective stripes for awareness on trouble roadways. International orange, with white and orange reflective stripes, as well as black, with yellow reflective stripes for dangerous installations, are available. Standard roll size is 4 x 50 ft. Applications include utility poles close to traffic, construction projects near roads, and pedestrian or vehicular traffic.

BEE International, Inc.    South Easton, MA 02375
Oct 04, 2002 DeBEE® Ultra High-Pressure Homogenizer, with fully modular, Next Generation(TM) Homogenizing Cell, has dual-jet system. Using fluid-against-fluid technique, dual-jet system has 2 high pressure fluid inlets and option to introduce third material into high-intensity stream. Using intensifiers which provide continuous smooth flow up to 45,000 psi, uniform nanoparticles with narrow D90 can be achieved. Unit is scalable to production quantities in thousands of liter per hour range.

Electro-Sensors, Inc.    Minnetonka, MN 55343 9108
Oct 04, 2002 Model VS1 detects both under- and over-vibration conditions. Weighing only 12 oz, unit adds little mass to machine vibration being measured to improve sensing accuracy. Monitor has cast-aluminum NEMA 4x enclosure. Range of vibration velocities can be adjusted from 0.10 to 2.20 in./sec rms, with set-point delay that can be adjusted from 1 to 10 sec to prevent false trips. Unit detects velocities in frequency band from 10 to 1,000 Hz.

Press Automation, Inc.    Elkhart, IN 46514
Oct 04, 2002 Resolver-based, rack-mounted Model SSC-3000 is designed for part-revolution-clutch mechanical power presses. Main CPU provides 12 user inputs, brake monitoring, 100-job memory, counters, and user-defined fault messages. Control uses touchscreen/display for operator interface and is expandable to include clutch/brake control, up to 16 programmable limit switch outputs, up to 24 die protection inputs, and up to 8 zones of load monitoring.

Snap-on Industrial    Kenosha, WI 53141 1410
Oct 04, 2002 Square-drive Model AT600 Blue-Point® ½ in., with ergonomic design, has one-finger forward/reverse lever, adjustable, 4-position air regulator, and weighs only 4.1 lb. Unit provides maximum forward torque of 550 lb-ft and reverse torque of 600 lb-ft. Twin-hammer mechanism, surrounded in oil bath, operates at forward speed of 7,000 rpm and reverse speed of 8,000 rpm. Both aluminum front and protective composite rear housings are chemically bonded to molded grip.

Snap-on Industrial    Kenosha, WI 53141 1410
Oct 04, 2002 Model AT702 Blue-Point® 3/8 in. square drive air ratchet utilizes flywheel technology to reach 65 ft-lbs of torque (max). Unit's mounted air motor design offers ball-bearing components and planetary 3-gear system that reaches free speeds of 200 rpm. Heavy-duty, ergonomic drive body design includes cushioned grip and handle to reduce vibration and insulate against low temperatures. Its vinyl head boot adds protection against damage.

Genesis Cable Systems LLC    Pleasant Prairie, WI 53158 2716
Oct 04, 2002 Cables are UL crush-, water-, sunlight-, and UV-resistant. Available in 500 ft reels in 16/2, 16/4, 14/2, and 14/4 cables, they suit applications such as fire or access systems, paging and sound systems, and commercial roof top applications for HVAC, fire, horns, or strobes. Suited to low voltage systems that are installed underground or within conduit subject to condensation or high humidity, cables are CL2/CL3 rated and UL listed.

ARPAC    Schiller Park, IL 60176
Oct 04, 2002 Fully automatic Sidewinder A Series allows fork truck operator access to wrapper without getting off truck. Load is automatically wrapped with the use of lanyard and press of button. Tail of film is tied with wire tie device, securing load to pallet. Programmable pneumatic roping device can rope throughout the wrapping sequence making machine ideal for block, mulch, and seed plants, or any product that ships on flatbed trailer.

Revvo Caster Co., Inc., The    West Seneca, NY 14224
Oct 03, 2002 Flexello casters are offered in wheel diameters from 1 5/8 to 16 in. with wheel materials of nylon, rubber tire, cast iron, polyurethane, Flexello Superthane, and Flexello Polynyl-Injection. Several casters feature kingpinless design. Applications include furniture, medical equipment, retail displays, cargo handling, and material handling applications.

Eriez Magnetics    Erie, PA 16506
Oct 03, 2002 Magnetic Coolant Cleaners remove turning fines from coolants. Base models use permanent ceramic magnetic material, while models with Rare Earth magnetic roll remove iron particles down to 3 microns. Permanent ceramic magnetic indexing units are available with extended poles on magnetic roll for removal of micron-size ferrous and nonferrous contaminants. Cleaners are suited to applications that mandate clean coolant recovery.

Norstat, Inc.    Rockaway, NJ 07866
Oct 03, 2002 SAFE L.2 Series safety relay provides emergency stop for safety light curtain and light barrier applications. Upon interruption of light beam, emergency stop is generated. Restart process can be activated by way of external bridge or by engaging special mode that allows SAFE L.2 to automatically restart. Unit offers 3 normally open safety outputs, displays operation status via LEDs, and meets requirements up to and including Risk Category 4.

Action Instruments, Inc.    San Diego, CA 92123
Oct 03, 2002 The I/O Pak(TM) DL Series intelligent data logging modules have Modbus, Profibus, and ASCII serial interfaces. They can log data from on-board I/O channels as well as other I/O Pak C-Series and K-Series modules on network. IOPK-DL100-U and IOPK-DL101-U support 8 or 6 universal analog inputs, respectively, while IOPK-DL104-T is dedicated to 4 PT-100 RTD inputs. All support modems, pager messaging on alarms, and scheduled and event driven data uploading.

Woodhead Canada Ltd. / SST    Waterloo On N2V 1n3, CD   Canada
Oct 03, 2002 Remote I/O Communication Adapter is for use with Allen-Bradley® Compactâ„¢ I/O. It features automatic mapping of I/O module data, support for up to 30 I/O modules in system, and separate LED indicators to provide system, network, I/O and diagnostic status. Baud rate and starting rack and quarter are user configurable. Processor lockout option prevents reconnection after loss of communication. Packed I/O option reduces network footprint to minimum number of quarters.

Woodhead Canada Ltd. / SST    Waterloo On N2V 1n3, CD   Canada
Oct 03, 2002 Applications running under Windows® XP can be connected to Data Highway Plus, DeviceNet, or Profibus using SST Interface Cards. Computer bus formats supported include PCI, ISA, PC/104, PCMCIA, and Compact PCI (varies by network). Cards provide connectivity solution for various applications including PC Control, HMI, SCADA, Operator Interface, and diagnostics. They also support applications running under Windows® 95, 98, 2000, and Windows NT® operating systems.