Open-Silicon, Inc.    Milpitas, CA 95035
Apr 11, 2012 Supporting SerDes data rates up to 28 Gbps and 1-48 lanes, Interlaken IP Controller v6 conforms to Interlaken Retransmit Extension protocol definition and is suited for networking, storage, and high-performance computing products. Unit offers multiple user-data interface options, including 128-bit or 256-bit wide with 1, 2, or 4 segments. In addition, core enables multiple configurations, such as single 600 Gbps interface or four 150 Gbps interfaces, selected at power-up.

Styrolution Group GmbH    Frankfurt am Main 60325  Germany
Apr 11, 2012 Created for packaging applications where high-impact polystyrene is blended with unmodified polystyrene, Styrolution(TM) PS 6220 features high-gloss properties that can help eliminate need for co-extruded gloss layer. Product can be blended with general purpose polystyrene to customize toughness and stiffness properties based on application.

Symmetricom Inc.    San Jose, CA 95131
Apr 11, 2012 SyncPoint(TM) PCIe-1000 Precise Time Protocol (PTP) Clock Card for Linux synchronizes with SyncServer® S350 PTP Grandmaster so sub-microsecond accurate time can be delivered at one or many trading venues worldwide. High-speed trading systems can then use this clock to time stamp market data, synchronize network monitoring systems, and synchronize time on trading servers. Time is delivered to Linux program with accuracy better than 600 nsec.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Apr 11, 2012 Dual output power supply, TPS43330-Q1 series, ensures stable and uninterrupted output voltages, even when input voltage drops significantly below output voltage levels such as with instances involving car's start/stop function. Input range of 2-40 V and transients up to 60 V ensure continued operation, while spread spectrum frequency modulation reduces conducted EMI. Along with multiple voltage rails and voltage supervisors, series integrates dedicated high-side FET driver.

Husky Injection Molding Systems    Bolton, ON L7E5S5  Canada
Apr 11, 2012 Offered in 2 performance levels, HyCAP(TM) 300 and High Performance Package (HPP) systems maximize performance via elements, such as plasticizing screw and check valve, adapted to suit characteristics of integrated direct drive technology. Features include electrified clamp lock function, single interface for central control, Mold ID, and fine tuning capability. HyCAP 300 system can produce 0.95 g, 26/22 lightweight water closure at 2.2 sec cycle using 96-cavity KTW beverage closure mold.

Husky Injection Molding Systems    Bolton, ON L7E5S5  Canada
Apr 11, 2012 Enabling energy monitoring capabilities throughout entire injection molding facility, Shotscope NX® energy module provides systematic approach to identifying and reducing sources of variation throughout entire workcell. This integrated process and production monitoring system can individually monitor all sources of energy consumption. Molders may collect, manage, and analyze production information, enabling real-time adjustment while satisfying regulatory document management requirements.

Integrated Silicon Solution, Inc. (ISSI)    Santa Clara, CA 95054 3311
Apr 11, 2012 Offering 576 Mb density, RLDRAM® 3 Memory is suited for 100G networking applications such as packet optical transport, carrier Ethernet switches and routers, and core and edge routers. Product offers Multibank WRITE feature that allows random READ accesses every 2 ns, which is on par with high-speed SRAM but with density that comes with DRAM. RLDRAM® 3 Memory is available in industrial and commercial temperature ranges and in leaded and lead-free packages.

For-A    Cypress, CA 90630
Apr 11, 2012 Using network connection, Model LTS-50 archives media files to LTO-5 high-capacity tape, regardless of file format. Linear Tape File System records video and enables reading/writing of files from PC via FTP. Model LTS-50 is suited for data backup that does not require video I/O, as well as archives of nonlinear editing materials that will be reused. With installation of external LTO drive, Model LTS-50 can create original and duplicate copies.

Ophir Optronics, Inc.    Wilmington, MA 01887
Apr 11, 2012 Available with 1 of 4 USB CCD cameras, BeamMic(TM) performs ISO measurements and test methods on lasers, including beam width, beam diameter, power/energy distribution, and spatial orientation. Statistical analyses can be performed on measurement functions and min/max limits can be set for pass/fail testing. Displays are continuously zoomable and resizable, shown in satellite windows on one or multiple monitors. Supporting 64-bit Windows OS, analyzer can export results to industry standard formats.

HABEY USA    Walnut, CA 91789
Apr 11, 2012 Offering 2.13 GHz processing via Intel® Atom(TM) N2800/D2700, MITX-6932 has Intel NM10 Chipset and up to 4 GB DDR3 memory. I/O includes 6 USB 2.0, 6 COM, 2 Intel 82574L Gigabit Ethernet, VGA, LVDS, HDMI, DVI, 5.1 HD audio, 2 mini-PCIe slots, and 1 SIM socket. For expansion, mini-PCIe slots support mini-PCIe SSDs to offer fully functional motherboard solution at under 25 mm in height with heatsink. This 170 x 170 x 18 mm board integrates 640 MHz graphics and 12 Vdc power connector.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Apr 11, 2012 Designed for Agilent Nano Indenter G200, Express Test option allows 100 indents to be performed at 100 surface sites in 100 seconds. Solution enables Nano Indenter to be operated in controlled-force or controlled-displacement mode. Capable of performing area-function calibration and Young's modulus and hardness evaluations, as well as generating quantitative maps of mechanical properties, system is suited for applications involving bulk materials, composites, thin films, and low-k materials.

LumaSense Technologies, Inc.    Santa Clara, CA 95054
Apr 10, 2012 LumaSpec(TM) R/T software helps manufacturers improve industrial processes by tightly integrating thermal imaging cameras with range of temperature- and gas-sensing technologies. Monitoring and analyzing processes in real-time, software helps plants improve product quality, lower production expenditure, and reduce safety hazards as well as downtime. Plants can set up monitoring applications and seamlessly configure alerts with their control systems.

Kason Corporation    Millburn, NJ 07041
Apr 10, 2012 Offered in stainless steel and carbon steel with 72 in. diameter, Vibroscreen® Low-Profile Pressure Sifter removes oversize particles and is engineered to operate under pressure on batch or continuous basis. Connections to incoming line, discharge line for on-size particles, and discharge spout for oversize particles are sealed using pressure sleeve connectors. To minimize height requirements, sifter employs 2 unbalanced-weight gyratory motors mounted on opposing exterior sidewalls.

Intercomp Co.    Minneapolis, MN 55447-4742
Apr 10, 2012 Consisting of 3 platform scales and RFX(TM) Wireless Handheld Indicator, ACII(TM) Aircraft System is suited for FBO operations and maintenance programs. Battery-powered system comes in 4,500, 7,500, and 15,000 lb capacities with accuracy of ±.1% of reading or ± display graduation, whichever is greater. With wireless indicator, users can turn scales on/off, zero scales, change scale and indicator settings, and perform calibration. RS232 and USB output are included.

IXYS Corp.    Santa Clara, CA 95054 2704
Apr 10, 2012 Supplied in 48-lead LQFP, CPC7601 and CPC7701 feature 16 low gate charge injection analog switches that are rated 200 V and controlled by 3 or 5 V CMOS logic signals. Input data is serially entered into 16-bit shift register and then buffered and stored in 16-bit transparent latch. Switches have flexible load voltage ranges - +40/-160, or +100/-100 V - and feature 60 dB min output-off isolation at 5 MHz. Additionally, CPC7701 features integrated bleed resistors on each switch terminal.

WinSystems, Inc.    Arlington, TX 76011
Apr 10, 2012 Powered by 1.66 GHz Intel® Atom(TM) processor and ICH-8M System Controller Hub with up to 2 GB DDR3 systems memory, PXM-C388-S features SUMIT(TM) (Stackable Unified Modular Interconnect Technology) I/O expansion connector. This RoHS-compliant SBC, which provides various on-board peripherals and I/O expansion options, requires +5 V, draws 2.5 A typ, and operates from -40 to +85°C. Power savings modes reduce standby current to 270 mA.

Maxon - A Honeywell Company    Muncie, IN 47307
Apr 10, 2012 With operating voltage up to 50 Vdc and output current of 5 A in continuous operation, DEC Module 50/5 controls brushless DC motors with Hall sensors up to 250 W. Digital servo amplifier offers variety of inputs and outputs, including enable, speed ranges, speed monitor, direction of rotation presetting, current limiting, and operating status. Integrated overcurrent, undervoltage/overvoltage, thermal overload, and short circuit ensure controller can be used securely.

Leica Microsystems AG      Switzerland
Apr 10, 2012 Used for discovery research and IHC biomarker quantification, Tissue IA v2.0 combines fluorescence and brightfield analysis capabilities along with precision cell modeling in one platform. Color separation and multi-marker colocalization functionality provide insight and unbiased measurement of multiple antigen immunostaining in samples, while cell modeling detects and quantifies differential expression of staining in cellular compartments.

Exlar Corp.    Chanhassen, MN 55317
Apr 10, 2012 CSA certified and in compliance with CSA 139, Tritex II(TM) Series accommodates applications requiring CSA Class I, Div 2 Groups A, B, C, and D certification. Units integrate servo drive, digital position controller, brushless motor, and linear or rotary actuator in sealed package. Capable of reaching speeds up to 25 ips and forces to 1,000 lb, Tritex II DC actuators virtually eliminate deadband and prevent stiction in valve stem from causing operation malfunctions.

Allegro MicroSystems Inc.    Worcester, MA 01615
Apr 10, 2012 Supplied in SMT package and optimized for 3.3 V supply operation, open-loop ACS716 has 120 kHz Bandwidth and consists of precision linear Hall sensor IC with copper conduction path near surface of silicon die. Integrated shield technology promotes immunity to current conductor dV/dt and stray electric fields, while voltage on overcurrent input (VOC pin) lets users define overcurrent fault threshold. Internal resistance of copper path used for current sensing is 1 mohm typ.