Enpac Corp.    Eastlake, OH 44095
Oct 23, 2002 Maintenance Blanket(TM) helps capture small leaks and drips under equipment during maintenance and can also be used (temporarily) under leaking equipment. Its protective sorbent pad has fuel and chemical resistant layer of polyethylene between service item and placement area. Available in sizes from 15 ft x 4 ft x 120 mil (4720-BK) to 10 ft x 10 ft x 120 mil (4735-BK), Maintenance Blanket offers capacities from 6 to 9 gal.

Landa Water Cleaning Systems    Camas, WA 98607
Oct 23, 2002 Model PM-1000D uses bioremediation to eliminate odors, oil, and grease in wastewater collection pits. All natural, environmentally friendly method of managing standing wash water automatically injects air and microbes into collection pit. Microbes in BioStax 900 agent consume and convert oils, greases, hydrocarbons, and organics into water and carbon dioxide. Air passes through sandstone diffuser to dissolve oxygen for optimum life and growth of microbes.

Feintool Equipment Corp.    Cincinnati, OH 45242
Oct 23, 2002 FeinGrip fineblanked brake pad attachment system features steel brake plate and array of integral, precisely angled teeth that lock pad to plate when friction material is molded and cured around teeth. System provides inside/outside ear-to-ear tolerance of ±0.03 mm, flatness of 0.02 mm/25 mm, and edge perpendicularity of 0.05 mm. Brake plate flatness prevents vibration and chatter under load. In-tool deburring eliminates need for post-process grinding.

Atlas Technologies Inc.    Fenton, MI 48430 1703
Oct 23, 2002 Lif-T-Rol die lifters raise die subplates and roll them out of or into press. Package includes manually operated air/hydraulic pump and operating valves, manifold kit, pressure switch and gauge, mounting hardware and die locating blocks. It is designed for bolster sizes from 18 x 36 in. to 36 x 60 in., handling die weights from 1 to 6 tons. Removable and swivel-type bolster extensions are optional. Ledge Clamps secure and position bottom of die subplate during operation.

Syfan USA, Corp.    Cooper City, FL 33024
Oct 23, 2002 Cross-linked polyolefin SYTEC® MVP is available in 60 and 75 ga, in widths up to 40 in. CF. Safe for food and non-food applications, it shrinks at low temperatures suitable for chocolate and icecream. SYTEC® RF4 creates leak-proof package and is designed for wrapping fresh or frozen meat. It stretches and remembers shape once wrapped, making it tamper evident. SYTEC RF4 is available in 60, 75, and 100 ga, either center folded or in single wind.

Fairchild Semiconductor    South Portland, ME 04106
Oct 23, 2002 N-Channel 60 V PowerTrench® Models FDB035AN06A0, FDP038AN06A0, and FDD10AN06A0 provide low gate charge of 124, 124, and 37 nC, and low R_DS(on) of 3.5, 3.8, and 10.5 mOhm, respectively. For inductive load switching, devices have unclamped inductive surge capability for single and repetitive pulses. Applications include high-current automotive such as motor/body load control, ABS, power-train management, and injection systems.

Kycon Inc.    San Jose, CA 95125
Oct 23, 2002 Model KFWS-SMTBS right angle, surface mount Serial Bus connector has back shield to prevent problems associated with EMI/RFI transmissions. Body is available in black or white PA6T thermoplastic. Unit aids data transfer from personal computers to computer peripherals and digital consumer audio/video equipment. KFWS-SMTBS is rated to 400 Mbps, has tin/nickel plated solder tails, and gold plating on the contact area.

Diversified Technology Inc.    Ridgeland, MS 39157
Oct 23, 2002 Model LBC8918 has .13 micron Intel Pentium III processor with 512 KB full core speed L2 cache, ServerWorks ServerSet III LE chipset with 133 MHz front side bus, and up to 2 GB PC133 Registered SDRAM DIMMs with full ECC support on 2 sockets. It provides (onboard) two 10BaseT/100BaseTX Ethernet auto-negotiating controllers and Ultra160 SCSI LVD and SE channels. Unit has 32-bit/33 MHz onboard PCI Bus Interface and 64-bit/33-66 MHz off-board PCI Bus Interface.

Eagle MHC, An Eagle Group Co.    Clayton, DE 19938
Oct 23, 2002 MasterTrak® high-density system utilizes roller assembly that eliminates binding. Clear access to units aids in cleaning and elimination of floor dirt and debris accumulation. Available with 4 shelving options, overhead track is offered in lengths from 6 to 21 ft. Stationary end-units require 74 in. posts and 4 shelves (min). Height-adjustable, mobile, intermediate shelf sections utilize caster locks.

Fairlane Products, Inc.    Fraser, MI 48026
Oct 23, 2002 Counterbored workholding serrated grippers are available in metric sizes from 12 to 24 mm (round and square) as well as in sizes from ½ to 1 in. (square and round). Grippers, offered with coarse, fine, and extra fine tooth patters, are made of tool steel, heat treated to R_c62. They mount utilizing socket head cap screw from serrated-face side and provide holding power with minimum wear on jaws, clamp fingers, and positioning points.

Metrobility Optical Systems    Merrimack, NH 03054
Oct 23, 2002 Delta Class Twister offers built-in cable management and protection, visible link and activity LEDs, and can mount to any office wall. It incorporates remote loopback, Link Loss Carry Forward, Link Loss Return, Far End Fault, and auto-recovery as well as automatic negotiation of full and half duplex modes and automatic crossover. Twister is available for 100 and 10/100 Mbps copper-to-fiber conversion and is offered in multimode and singlemode models.

Chemineer, Inc., A Unit of Robbins & Myers, Inc.    Dayton, OH 45401
Oct 23, 2002 Q·E·D^Plus(TM) Mixers have cast iron housing and are available for shaft speeds of 44, 70, 88, and 117 rpm. Standard NEMA C-flange motors range from 1-5 hp. Mixers offer minimum 30,000 hr L10 bearing life and tapered shaft engagement system for easy disassembly. Stuffing box and lip seals are included for closed tanks. Shafting is oversided by ¼ to ½ in. over competitive designs. Units are suitable for chemical, petrochemical, pharmaceutical, and general fluid processing.

IntelLiDrives Inc.    Philadelphia, PA 19152
Oct 23, 2002 RotoRingâ„¢ Series combines RotoLinearâ„¢ motor technologies and planar air bearings. Tables feature 14 in. diameter center opening to allow access to every die on wafer in die attach and flip-chip applications. Distributed RotoLinearâ„¢ motor modules provide high positional stiffness to maintain wafer alignment during fast cartesian wafer indexing. Tables offer 30 Nm torque and positioning accuracy of 10 arc-sec (no feedback) and 2 arc-sec (with feedback).

Chemelex Div., RBP Chemical Corp.    Milwaukee, WI 53214 0069
Oct 23, 2002 SILCLEAN NS low VOC, alkaline cleaner/degreaser contains no SARA Title III, Section 313 reportable chemicals or chlorinated solvents. It cleans and suspends dirt and oils from silicone wafers and metal substrates. Product contains corrosion inhibitors, degreasers, and wetting agents to emulsify oils. It is easy to rinse and leaves no film or residue. Non-hazardous, non-combustible cleaner can replace solvents for general cleaning of metal surfaces.

Amada Wasino America, Inc.    Rolling Meadows, IL 60008
Oct 23, 2002 Model G05UP holds 1 micron in cylindricity, roundness, and positioning. Built with precision-type integral motor, unit also incorporates built-in active thermal feedback monitoring system and isolated automation package. Equipped with floor type loader, G05UP offers .00001 in. X and Z offset capability. Spindle speeds reach 12,000 rpm, travel for X- and Z-axes is 8.66 in, and traverse rate is 600 ipm. Applications include surface finishing and IT industry parts.

Mettler-Toledo Process Analytics    Bedford, MA 01730
Oct 23, 2002 EasyClean 350 fully automates in-line analysis of pH, dissolved oxygen, and conductivity in liquid processes. It carries out all routine maintenance relative to cleaning and calibration without skilled maintenance personnel. Self-monitoring diagnostics immediately alert process operators or maintenance personnel to functional problems. Designed for use in high-throughput liquid processes, system suits chemical, pharmaceutical, and industrial wastewater applications.

Mettler-Toledo Process Analytics    Bedford, MA 01730
Oct 23, 2002 With application field including suspensions, solvents, acids, and alkalis, InPro® 4250 electrode offers 0-14 pH range and integral temperature sensor. Its XEROLYT®PLUS reference system consists of solid polymer, which does not require refilling of electrolyte. Pressure resistant for operation pressures up to 232 psig, XEROLYT®PLUS is in direct contact with measuring media using open junction (no diaphragm). Electrode is resistant to sulfide contamination.

Mettler-Toledo Process Analytics    Bedford, MA 01730
Oct 23, 2002 InPro 4800, with gel electrolyte, provides resistance towards oxidizing media, solvents, and acid or alkali solutions, with operating pressures to 188 psi at 266°F. Offerings include pressure-compensated reference system, diffusion path in 2 separated, reference electrolyte chambers, and dirt-repellant, annular PTFE reference junction. Unit also includes integral temperature sensor and watertight VarioPin plug connector.

Intermec Technologies    Everett, WA 98203
Oct 23, 2002 RoutePower® route distribution software automates customer order information, delivery invoicing, inventory management and product pricing. It runs on Windows for Pocket PC 2002 software and is designed for Series 700 mobile computers. Built-in 802.11b local area network support allows software to transmit data wirelessly within customer's network. Load-by-bay function permits route driver to request that product be loaded into specific bays of delivery vehicle.

Front Range Solutions Inc.    Colorado Springs, CO 80920
Oct 23, 2002 HEAT® Service & Support(TM) v7.0 includes Directory Services integration using Lightweight Directory Access Protocol, allowing organizations to access HEAT profile information from common repository. Documents such as maps, schematics, photos, and test files can be linked with customer information. HEAT Plus Call Center companion module allows users to transform service centers into complete customer interaction organizations by integrating communications system with computer telephony functions.