Smith Eastern Corporation    Jessup, MD 20794
Nov 05, 2002 PAPCE captures contaminants from painting overspray, welding and chemical fumes, sanding dust, and cleaning operations at work source. Its versatility in unenclosed spaces promotes safe and healthy work environments. PAPCE is approved by CA-SCAQMD.

Del City    Menomonee Falls, WI 53051
Nov 05, 2002 OEM-type, 5-stage Crimping Tool crimps 20-12 gauge OEM (open barrel) automotive terminals. Combination Crimping Tool crimps 22-8 gauge, non-insulated terminals; 22-14 gauge insulated terminals; and 7 and 8 mm ignition terminals. Tool also strips and cuts wire and cuts screws. Suited for battery terminals, Die Cast Terminal Crimping Tool handles all die cast terminals and lugs, 6 through 4/0 gauge. Its offers 26 in., fully-insulated handle and lock button.

Chiron America, Inc.    Charlotte, NC 28278
Nov 05, 2002 Model MC 536 with CNC capabilities offers fixed table that can be used as 2 separate areas for pendulum machining or as 1 area covering total X-travel range (133 in. or more). With digital direct drives in all axes, VMC also includes tool magazine with intelligent tool management that handles up to 54 tools. Machine includes Y and Z limits of 21.65 and 20 in., respectively, and traverse speeds of 1575 in./min. Spindle speeds reach 8,000/10,000 rpm.

Uvex Safety Inc., A Bacou USA Co.    Smithfield, RI 02917 1896
Nov 05, 2002 Scorpionâ„¢ Personal Fall Limiter (SRL) can be attached directly to harness back D-ring for use as Personal Fall Limiter, or it can be used as traditional retractable lifeline. Its smooth, quiet, lightweight design provides 9 ft of working capacity. Lifeline is protected with Teflon HT, invisible finish that provides water/oil repellency and protection against grease and grime. Unit meets OSHA, ANSI, and CSA requirements.

EADmotors/Eastern Air Devices, Inc.    Dover, NH 03820
Nov 05, 2002 Brushless DC servomotor-based actuator, with precision ball screw and low-profile encoder, provides linear speeds up to 5,000 rpm and closed-loop control. Compatible with all 3-phase brushless DC motor amplifiers, NEMA size 23 motor offers permanently lubricated ball bearings and dynamically balanced rotor. Compact, 2.0 in. motor length provides up to 80 oz-in. peak torque. Applications include medical equipment, semiconductor, robotics, and syringe pumps.

Avery Dennison, Soabar Systems    Philadelphia, PA 19111
Nov 05, 2002 On-Line Verifier (OLV) interfaces with 64-bit microprocessor-controlled tag and label printers and provides bar code verification without reductions in print speed. High-speed, moving-beam laser scanner analyzes printed bar codes according to user-selected parameters. If missing or inaccurate bar codes are detected, OLV interrupts print run and automatically alerts operator. Unit can perform both ANSI and traditional measurements.

Edmund Optics    Barrington, NJ 08007
Nov 05, 2002 Basler area-scan cameras are offered in models providing VGA (640 x 480 pixel), CCIR (780 x 580 pixel), or Megapixel (1300 x 1030 pixel) resolution. Monochrome and color cameras, with BCAM 1394 driver, provide high-speed video output at up to 75 frames/sec for VGA camera. Windows 2000-compatible driver offers both low and high level interfaces, as well as C++ source code. Test images confirm that camera is processing all data included in image.

Kurt Manufacturing    Minneapolis, MN 55421
Nov 05, 2002 Compact CarvLockâ„¢ HD 8-station manual and hydraulic towers have quick-change machinable jaws that mount on ductile iron base. Clamping stations on manual tower produce 5556 lbs of clamping force at 70 lb-ft of torque, with repeatable clamping to .001 in. Hydraulic model produces up to 7800 lb of clamping force. Both are easily converted from manual to hydraulic or vise versa. Manual tower is only 16.875 in. high and comes on 300, 400, 500 or 630 mm bases.

Double E Co., Inc.    West Bridgewater, MA 02379
Nov 05, 2002 Model RK31 remote web guide controller is equipped to control up to 10 web guides at same time. It connects to web guide driver(s) using single Serial BUS RS485 cable to facilitate electrical installation requirements. Controller can receive signals from ultrasonic, infrared, and camera sensors for line, center, or edge guiding. RK31 includes LCD display that communicates instructions for initial calibration and for setting web guide parameters.

Terracon Corp.    Holliston, MA 01746 1460
Nov 05, 2002 Dual Tank Console is for batch applications that require complete mix and verification prior to distribution or dispensing. Standard 60 or 115 gal consoles are available. User can configure system to best suit application. One tank can be used for mixing, and other as distribution loop reservoir. Both processes can be performed in both tanks, alternating between tanks to allow for cleaning and disinfecting between batches, while keeping downstream system in operation.

Tisma Machinery Corporation    Elk Grove Village,, IL 60007-4907
Nov 05, 2002 Vertical flip-top stainless steel cartoner, the TC 120, features carton design that has one-hand use and internal recloseable lock that holds product in carton and prevents spillage. Product counter/filler system counts confectionery and pharmaceutical products up to 20,000 pieces/min. Applications range from 50 to over 600 cartons/min. Available options include washdown capabilities, leaflet inserters, and empty carton reject bins.

United Receptacle, Inc.    Pottsville, PA 17901-0870
Nov 05, 2002 Constructed from fire-safe steel, Aladdin Smokers' Station® will not burn. Its oxygen restricting design quickly extinguishes cigarettes. Unit has choice of Uni-Koat® hammer tone gray or bronze powder coated finish, which provides resistance to outdoor environments. Stainless steel latches are provided for tight seal. Additional features include nylon base buttons, nickel-plated brass theft deterrent chain, and galvanized steel liner.

Conta-Clip    Hillsborough, NJ 08844
Nov 05, 2002 Series ZSRK2.5 panel mount mini spring clamp terminal block features integral provision for internal jumping that allows voltage potential to be distributed throughout multipole assembly. Available as individual snap-together elements or multipole assemblies up to 12 poles, terminal block's 5 mm width provides top wire entry design. With breadth of 1.58 in. and overall height of 0.95 in., unit has 300 V, 20 A, 22-12 AWG UL/CSA electrical rating.

Tyco Electronics/Raychem.    Menlo Park, CA 94025-1164
Nov 05, 2002 Model GB4xxx-LP single-port Gigabit Ethernet magnetics module measures 2.5 mm thick and suits 10/100/1000 Gigabit applications. Surface-mount module helps provide single port IEEE802.3 compliant transformer/choke for Gigabit Ethernet applications. Package includes 4 isolation transformers, 4 common mode chokes, and option for 4 Auto Transformers. Unit is suitable for use in laptop computers, tablet PCs, PCMCIA cards, docking stations, and low-profile Ethernet devices.

Burke Industrial Coatings    Vancouver, WA 98682 2410
Nov 05, 2002 Steel Plus epoxies provide packaging and processing machinery with resistance to harsh CIP sanitation and corrosive chemicals, and are impervious to high-pressure washdown and other severe factory conditions. They have no odor and can be applied to steel, galvanized steel, tin, and aluminum. Epoxies are quick drying, resistant to alkalines and acids, and available in 1 or 5 gal sizes. They can be applied by brush, roller, air-atomized, air-less or hot spray.

EPIX, Inc.    Buffalo Grove, IL 60089 6934
Nov 05, 2002 PIXCI® CL3SD captures 1280 x 1024 image sequences at 500 frames/sec. It connects to Basler A504K camera and provides exposure control and serial camera configuration. Unit allows capture of image sequences at camera's max data rate of 625 megabytes/sec. Up to 4 gigabytes of onboard memory allows for analysis of high speed events. Trigger input can start or stop capture. Software provides image processing and analysis, and image sequence transfer to disk.

Minco    Minneapolis, MN 55432
Nov 05, 2002 Flexible Circuits with high-density connectors feature circuit conductors under 0.003 in. Connectors have 0.025 in. pitch allowing designers to save space and simplify designs. Flex circuits meet IPC specfications, and connectors meet MIL-PRF-85313.

AMS, Inc.    American Falls, ID 83211 1230
Nov 05, 2002 Model 9630 VTR Mini compact PowerProbe has 27,900 lb of pull up capability and 22,000 lb of down force with 10.5 in. of hydraulic side-to-side movement. Device offers 2 different hammer options to choose from for direct push penetration. Additional 500 lb-ft auger permits hollowstem capabilities and use with surface conditions not suited for direct push.

Tra-Con, Inc.    Bedford, MA 01730
Nov 05, 2002 TRA-BOND 724-5 polyurethane adhesive is extremely resilient and provides strong bonds while maintaining high flexibility. It acts as electrical insulator and bonds to variety of substrates. Adhesive can be used as bonder or protective coating, making is suitable for wide range of applications.

Techniks, Inc.    Indianapolis, IN 46236
Nov 05, 2002 Suited for carbide drills 6 mm and smaller, DNA Collets (Dead Nuts Accurate!) provide consistent T.I.R. to extend tool life. They can be used with any standard ER 16 collet chuck.