Demag Cranes and Components    Cleveland, OH 44139
Dec 09, 2002 Modular Model MPW includes option of 2-speed or infinitely variable speed operation, DC Brake or Double Shoe Brake, rope drum, and true vertical lift. Hoist uses 4-stage gearbox with offset between input and output shafts. Motor and brake are flange mounted to gearbox, eliminating additional connections between lifting unit and trolley frame. Load capacity is rated at 5-185 tons, lifting power is 25-224 hp, and rope-reeving arrangements are 4/2-8/2 and 12/2.

Kardex Remstar LLC    Westbrook, ME 04092
Dec 09, 2002 Automated Freezer Vertical Carousel provides high-density storage with access to items via vertically arranged carriers. Access area presents stored items at ergonomic height for picking, while carousel maintains temperature at consistent levels down to -20°C. Controller links operating system and cooling system, allowing carousel to rotate periodically to keep temperature of stored items uniform throughout unit. System also controls defrost and thaw cycles.

CyberResearch, Inc.    Branford, CT 06405 2932
Dec 09, 2002 GDS Series consists of 3 TFT LCD displays with adjustable, clamp, through-hole, or weighted-stand arms. Series offers 15.1 and 12.1 in. screen sizes rated from 300-800 nits. Each monitor offers 2-piece, cast-aluminum shell with optional analog resistive touchscreen. Swivel arm provides 5 axes of rotation: 180° pan left and right, 180° pivot up and down, 270° clockwise and counterclockwise rotation, 90° rotation from horizontal to vertical, and 360° base swivel.

Wayne Machine & Die Co.    Totowa, NJ 07512 1825
Dec 09, 2002 Yellow Jacket Direct OEM Replacement extruders are available in 3½, 4½, 6, and 8 in. sizes. Design allows users to replace extruder in less than one day of installation time. Units are customized to match overall outside dimensions, hopper locations, center distances, power drop and utility connections, vent stack location, barrel flange, and screw design. They include digital, auto-tuning temperature control and AC Flux Vector drives.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Dec 09, 2002 Series SAE hydraulic reservoir shut off valves offer O-ring flange face seals that comply with S.A.E. J518 dimensional requirements. Products provide bubble tight reservoir shut off up to 25 psi and maximum temperature of 180°F (up to 300°F with optional Viton® O-ring seal). Flange sizes include 2, 2½, 3, 4, and 5 in. models. Suited for fluid power industry, units allow for adjustment by incorporating open/close detent position locks.

Molex Inc.    Lisle, IL 60532-1682
Dec 09, 2002 Type III 124-pin PCI connectors feature .031 in. pitch and mounted height options of .160 and .204 in. Anti-overstress feature helps protect latch from breaking. Connectors come with or without grounding clips and with front solder tabs or PC tabs. Stamped-and-formed contacts provide electrical continuity and have no sharp edges. Gang-load assembly of contacts provides coplanarity control of .004 in. Housing is glass-filled, high temperature thermoplastic.

Wieland Electric Inc.    Burgaw, NC 28425
Dec 09, 2002 Feed-through revos IT connector consists of hood and housing with double-locking levers. Cable is fed-through hood and housing with snap-and-lock method that does not require special tools, on-site cutting, or mounting. Connector is available with 2, 3, and 4 cable feed-through capacity in 10, 16, or 24-pole configurations. Die cast aluminum alloy housing uses oil-resistant and anti-aging neoprene gaskets. Connector is temperature rated -40 to +100ºC.

Carbis Inc.    Florence, SC 29502 6229
Dec 09, 2002 Custom, pre-engineered units handle pipe diameters up to 12 in., live loads of 30 psf per level, and wind loads of 90–120 mph. T-support racks are suited for lighter loads where space is limited, while bent racks support heavier loads and longer pipe runs. Both types of racks are available in multiple levels, are base plate mounted, and clear heights from 10–20 ft. Custom pipe bridges and service walkways with fall protection are also available.

GB Gardner Bender    Milwaukee, WI 53209
Dec 09, 2002 GB Xtremeâ„¢ wire terminals, lugs, primary wire, and cushion clamps withstand exposure to moisture, petrochemicals, acids, alkalis, UV rays, vibration, and salt water. Built from nylon, tin-plated copper, annealed stainless steel, and EPDM, products are suited for outdoor lighting, pool, irrigation, mower, pump, and likewise harsh environments. Terminals have nylon insulation that remains flexible in temperatures from -40 to +110 °C.

United Grinding Technologies, Inc.    Miamisburg, OH 45342
Dec 09, 2002 Kronos S permits straight plunge grinding and 15° angle plunge grinding of shaft-type parts. It handles workpiece diameters from 0.5–30 mm and lengths up to 120 mm. Cross slides on grinding and regulating wheel side come with digital drives and precision ball screw drive. Double-end supported grinding wheel spindle permits surface speeds up to 120 m/sec with CBN, and double-end supported regulating wheel spindle delivers up to 1,000 rpm.

Textiles Coated Inc.    Amherst, NH 03031
Dec 09, 2002 Non-porous Chemduitâ„¢ ducting consists of PTFE material encasing steel coil. It survives and contains corrosive chemicals in electrolytic processes and handles severe temperatures up to 550°F. Chemduit can be used in positive and negative pressures. Most diameters, lengths, and colors are available. Ducting can also be customized in conductivity, thickness, abrasion resistance, and flexibility properties.

Igus, Inc.    East Providence, RI 02914 0349
Dec 09, 2002 Chainflex® CFLG is glass fiber optic cable that combines transmission rates of glass fibers with flexibility required for automation industry. It withstands temperature range of 20-158°F, nominal voltage of 300/500 V, and bandwidth of 20 MHz x km. Damping rate is 6 db/km at 820 nm and 30 dB/km at 1300 nm. Chainflex CFLG is suited for use with cable carrier.

Kalamazoo Industries, Inc.    Kalamazoo, MI 49001
Dec 09, 2002 Model KVF3 provides deburring, polishing, and finishing operations where vibrating action of rotating media is required. It includes 3.3 cu ft capacity steel tube with cast urethane lining; ¾ hp, single-phase, 110 Vac motor; and steel construction. Unit measures 36 x 27 x 36 in. and features casters for portability.

Tracewell Systems, Inc.    Westerville, OH 43081-8846
Dec 09, 2002 Model S36-8U meets EMC limits of MIL-STD 461 and shock requirements of MIL-STD 901. Welded chassis has hinged door with compression seal for EMI shielding. It occupies 8U of rack space and provides front-to-rear cooling flow. Power options include ac input with 400 Hz capability, as well as 24 and 48 Vdc input utilizing TTX technology. Standard bulk power for up to 1000 W can be supported, while redundant hot-swap power ranges from 350–700 W.

CADATA Consulting Ltd.    Calgary, AB T3G 3T2
Dec 09, 2002 With no risk to source drawings, dwgBase RAD4CAD allows data owners to add custom CAD drawing, searching, reporting, and indexing functionality to DMS/Workflow system without programming or CAD license. Operating as wizard, program permits user to filter, extract, and share data from multiple CAD drawing files. Command line capability, in conjunction with scripting tool, provides Rapid Application Development for CAD (RAD 4 CAD) solution.

MSC.Software Corporation / MSC.Mechanical Solutions    Costa Mesa, CA 92626
Dec 09, 2002 MSC.Dynamic Designer, for Autodesk Inventor and Solid Edge, creates motion models from CAD assemblies, simulates dynamic motion of assemblies, and views animations and XY plots of resulting motion without leaving CAD environment. Offerings include animated result graphics, realistic animated springs, contact containers, and isotropic bushings. Automation API allows use of Visual Basic or Visual C++ to drive program, while MSC.ADAMS 12.0 Solver provides 3-D contact.

Creative Materials Inc.    Ayer, MA 01432
Dec 09, 2002 Single-component, silver-filled, polyimide No. 122-47 adhesive is suitable for application by stamping, screen printing, dipping, and syringe dispensing. Cure schedule allows for rapid processing and resulting bond exhibits thermal stability and chemical resistance at greater than 250°C. Adhesive also provides low coefficient of expansion. Applications include die attachment, surface mounting, PCB fabrication, and sealing and coating.

Bridgewater Systems Inc.    Kanata, ON K2K 3J1  Canada
Dec 09, 2002 AAA Service Controller provides authentication, authorization, and accounting across multiple access technologies, including CDMA 2000 1X, dial, DSL, and 802.11. Usage is attributed to user regardless of credentials and protocols used to gain access. Revenue Collector and Revenue Formatter collect and aggregate usage detail records into session records. They filter, format and stream session records to appropriate billing and settlement systems. User Session Controller prevents 802.11 account sharing.

Keithley Instruments, Inc., Test Instrumentation Group    Cleveland, OH 44139 1891
Dec 09, 2002 Model 2800 RF Power Analyzer is designed for production test of wireless phones, RFIC power amplifiers, and related RF devices designed to AMPS, cdmaOne, North American digital cellular (TDMA), GSM, GPRS, EDGE, PDC, CDMA2000 1X, and WCDMA standards. Production-oriented instrument accommodates emerging technical requirements for test and measurement.

TE Connectivity Ltd.    Berwyn, PA 19312
Dec 09, 2002 RAYCHEM(TM) coaxial cable is dimensionally equivalent to standard RG 316 cable and can be terminated using standard connectors. It offers non-melting insulation and low attenuation loss up to 50 GHz. Impedance is 50 ohms with velocity propagation of 66%. Max attenuation is 41.67 dB/100 ft at 2.35 GHz. Bare-copper center conductor is surrounded by RAYOLIN(TM) L dielectric material, tin-copper braid and THERMORAD(TM) F jacketing. Applications cannot exceed 100°C.