BEI Systron Donner Inertial Div.    Concord, CA 94518
Feb 24, 2003 MEMS-based Digital Quartz Inertial Measurement Unit utilizes GyroChip® technology consisting of dual-ended quartz tuning fork rate sensor and vibrating quartz accelerometer. It provides delta theta and delta velocity output at 100 Hz in 6 axes, with linear acceleration and angular rate output at 600 Hz in RS-422 AMRAAM output format. Miniature unit is suited for guidance, navigation, and control for commercial, aerospace, and defense applications.

Nordson Packaging Systems    Duluth, GA 30155
Feb 24, 2003 Series ECC 700 fluidizes, charges, and sprays cable with various powders, including talcs and super-absorbent powders. Pumps maintain adjustable, even flow of powder to obtain desired coating thickness. Closed-loop powder recovery feature prevents powder from being released into environment. Tribomatic® spray gun charge results from friction between powder and inner surface of gun, while Versa-Spray® guns use corona process to charge powder particles.

Telatemp Corp.    Fullerton, CA 92831
Feb 24, 2003 Pistol-grip IR Thermometer features built-in laser pointer that allows accurate aiming for non-contact temperature measurements. Large, backlit LCD display allows measurements to be taken in night-time or low light conditions. Basic accuracy is ±2%F over range of 0–600°F or ±2°C. Field of view is 6:1. Unit is °F/°C switchable and includes audible and visible overrange indicators. It is powered by 9 V battery and has automatic power off.

Barton Instrument Systems, LLC    City Of Industry, CA 91749-1882
Feb 24, 2003 Series B30 Transmitters and B40 Transmitters-Controllers provide measurement and control of differential pressure, absolute pressure, gauge pressure, and saturated steam flow. Non-conductive and conductive liquids at high viscosities can be accommodated. Units feature remote options, rotatable NEMA 4X/6P housing and rotatable smart display, and built-in PID controller. They have Hastelloy-C diaphragms, 316SS wetted parts, and ¼ or ½ in. NPTF process connections.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Feb 24, 2003 Millermatic® 251 welding system is offered with wire welding module that mounts directly to side of unit, enabling 12 in. spools of aluminum wire with .035 or .047 in. dia to be run on internal wire system. System permits unit to connect directly to XR-Edge and XR-A pistol guns with 15 or 30 ft cables. Push-pull design allows for consistent feeding of aluminum wire by providing constant torque to wire at power source and constant wire feed speed at gun.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Feb 24, 2003 Spoolmatic® 15A, with 15 ft cable assembly, offers nozzle assembly that balances gun evenly in operator's hand. Capable of wire feed speeds from 70–875 ipm, unit pushes wires with .023-1/16 in. dia and holds one 4 in. spool. Additional offerings include adjustable barrel assembly that allows operator to vary contact tip-to-nozzle position, built-in gas valve, and ability to adjust wire speed at gun handle.

OmniVision, Inc.    Glendale Heights, IL 60139
Feb 24, 2003 Suited for integration into 19 in. racks, industrial grade KVM Switches consist of 15.1 in. TFT active matrix LCD monitor with 1024 x 768 max resolution, 105-key keyboard, and PS/2 touch-pad mouse in slide-out shelf. Basic input is computer interface VGA/SVGA/XGA signals. RMD-515 models are designed for use with one computer, while 8-port RMD-815 models interface monitor, keyboard, and touch-pad mouse with up to 8 computers.

New Pig Corp.    Tipton, PA 16684 0304
Feb 24, 2003 PIG® Roll-Top Hardcover stores up to 4 drums with room for pumps and funnels. Corrosion-resistant, weather-tight design keeps drums safe and secure. Lockable doors and roll-top covers open from both sides of unit and slide out of the way for quick access. Hardcover is attached to 75-gal containment pallet and has 2-way forklift entry for easy movement. Leaks and spills from drums are contained in sump, which helps aid in 40 CFR 122.26 ande 40 CFR 264.175 compliance.

Airtrol Components Inc.    New Berlin, WI 53146 2107
Feb 24, 2003 Unit regulates pneumatic or water pressures in applications that require little or no flow. Output is adjustable with ranges from 0-3.5 psi to 0-100 psi with 15 turns of resolution. Maximum supply pressure is 150 psi with maximum air flow of 1.0 scfm, and maximum water flow of 0.2 gpm. Non-bleed, non-relieving type regulator is for use in medical equipment, air bearings, and custom machinery. Parts can be flush or panel mounted.

Anver Corp. - Anver.Com    Hudson, MA 01749 3214
Feb 24, 2003 Series OC Oval Suction Cups are precision molded from FDA-approved, non-marring silicone or nitrile and feature snap-on reusable cup fittings and non-rotating suspensions. Sizes range from .39–3.94 in. long to 1.38 in. wide and various depths. Units are suited for handling small round or cylindrical oblong surfaces in automation systems where product orientation is critical.

Enerpac (Industrial Tools)    Milwaukee, WI 53201 3241
Feb 24, 2003 Hydraulic, aluminum cylinders include single-acting RAC Series, double-acting RAR Series, RACL Series single-acting lock-nut, and RACH Series single-acting hollow plunger. Constructed from 7075T-6 aluminum Alloy with Hard Kote treatment, products incorporate composite bearings on all moving surfaces, removable hardened saddles, and steel base plates. They provide lifting capacities from 20–150 tons and stroke lengths to 250 mm.

AMETEK Technical & Industrial Products    Kent, OH 44240
Feb 24, 2003 Variable speed, premix gas blowers for commercial furnaces and boilers, gas-fired food service equipment, water heaters, and kilns eliminate need for complex air intake damper systems. Burner blowers serve needs of several different burners and are available with both 120 and 240 Vac input. Units are 1/3 size of low-speed AC blowers, have variable speed control, and AC input. Digital signal processors, DC input, and pressure taps are available.

B & K Precision Corp.    Placentia, CA 92870
Feb 24, 2003 Hand-held Model 240A Remote Network Cable Analyzer enables users to read status of Ethernet twisted pair cables. Battery powered unit tests for open circuits, shorts, crossed pairs, reversed pairs, and split pairs for lengths from 1.97 to 450 ft. When using Model 240A's tone generator function, Model 261 Cable Tracing Probe traces cables and locates faults. Optional remote probe traces installed cables and locate areas of discontinuity.

Bell & Gossett    Morton Grove, IL 60053
Feb 24, 2003 Technovar® Pump Controller consists of variable frequency drive with integral microprocessor controller that mounts directly on motor. Utilizing variable speed capability, controller adjusts power consumption. Programmable features include over/under voltage protection, overload/overhead protection, and adjustable acceleration/deceleration. Available in 1–30 hp, product allows for staging and sequencing of up to 4 pumps and performs 4 system control methods.

ESI North America    Shelby Township, MI 48315
Feb 24, 2003 PAM-CRASH 2G facilitates model preparation and analysis. Predictive rupture model provides accurate answers to material deformation, including composites, high-strength steel, and aluminum. It reduces dependency on mesh orientation and size, and takes into account scale effect for realistic rupture simulation. Solver offers highly scalable parallel version for overnight computation, while Distributed Memory version enables intensive calculation.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 24, 2003 ADS 2003A provides engineers creating microwave designs with integrated environment for schematic capture, simulation, analysis, and layout. Physical Designer Pro and Physical Designer Premier include layout, design rule checker, and artwork translator capabilities. MMIC Designer Pro and MMIC Designer Premier offer schematic and layout design environment, circuit and EM simulators, analysis capabilities and GDSII translator. Momentum EM Bundle adds EM verification.

Yokogawa Corp. Of America    Newnan, GA 30265 1040
Feb 24, 2003 Exapilot Release 2.20 Operation Efficiency Improvement software aids control system in automating areas of non-steady-state operations that have been unavoidably performed manually. Optional Advanced Alarm Functional Block enables early signs of problem to be detected and proper counteractions to be taken automatically before it appears as alarm detected by control system. Exapilot applications do not require programming but are written in flow chart form.

Mi-T-M Corporation    Peosta, IA 52068
Feb 24, 2003 CW Series, for commercial and industrial users, is powered by 11.0, 13.0 and 16.0 hp Honda and Vanguard engines. Features include triplex ceramic plunger pump, thermal relief valve, water filter, 50 ft of hose, 36 in. steel powder-coated lance, quick-connect nozzles, pneumatic mag tires, powder-coated 1¼ in. steel tube handles, hose wrap with wand holder, and 2-piece belt guard.

Tapeswitch Corp.    Farmingdale, NY 11735
Feb 24, 2003 Angle Guardstar B, manufactured to meet user-specific requirements, offers one-piece, aluminum extruded body that measures 1 3/8 x 1 3/4 in., allowing for integrated appearance on equipment. Unit, consisting of emitter and receiver, make up self-contained system which is capable of safety functions without additional equipment. Interface configuration can be used with various safety relay units, fail-safe PLCs, and control units.

Baumer Ltd.    Southington, CT 06489 1534
Feb 21, 2003 Ultra-Miniature 4 and 5 mm inductive proximity sensors feature supply voltage of 10-30 Vdc, sensing distance of 1.0 mm, load current of 100 mA, and 2-point output-state LED indicator. Units incorporate ASIC and flip-chip technology and include short-circuit and reverse polarity protection. Both are encased in 24 mm long, stainless steel housing which fits vibration resistant, IP67, M5 x 0.5 screw-on connector, available in straight and 90° versions.