Anorad Corp.    Hauppauge, NY 11788
Feb 25, 2003 Series LC steel core, brushless linear motors feature insulation system and motor coil design, which achieves Class H 180°C protection and 650 Vdc bus voltage rating. Model LC-80-240 is 80 x 240 mm and rated at 62 lbf continuous, and Model LC-80-340 is 80 x 340 mm and rated at 94 lbf continuous. Molding completely encapsulates face of motor, sealing laminations and eliminating moisture migration path. Stainless steel shroud covers magnets providing additional protection.

Emission Control Ltd.    Butler, WI 53007
Feb 25, 2003 FL Series EMI filter provides protection from conducted electronic noise in 3-phase applications. Suited for inverter, variable speed motor drive, RF generator, and uninterruptible power supply requirements, product incorporates integral coil design with characteristics that make it suitable for use in existing products as well as in new designs.

JACO Inc.    Franklin, MA 02038
Feb 25, 2003 J-Mobilityâ„¢ SLâ„¢ slimline carts have 7° angled post and 5° angled handle design, which brings work surface closer to operator and allows for more natural posture and height adjustment from 29–39 in. Keyboard tray is retractable, and features bi-directional mouse tray for left or right hand mouse placement. Portability is achieved through 5 ¼ in. rubber casters. Carts are welded steel and aluminum with scratch and spill resistant, powder coated finish.

Aremco Products, Inc.    Valley Cottage, NY 10989
Feb 25, 2003 Thermally conductive, silicon carbide-based Ceramacastâ„¢ 673N can be used in applications with temperatures to 2,450°F. Chemical setting, ceramic compound is formulated as two-part, powder base and hydrophobic liquid binder system. Product is fully hardened by air setting for 8 hr then step curing for 1-2 hr at 200 and 250°F, respectively. Cured material demonstrates shrinkage of less than 0.3% at 1,000°F and compressive strength of 5,000 psi.

Harmonic Drive, LLC    Peabody, MA 01960
Feb 25, 2003 Harmonic Planetary® HPG Series is offered in size 50, which is only 175 mm long with 170 mm square mounting flange. Rated torque is 2,610 lb-in. and max torque is 16,375 lb-in. Gear ratios range from 5 to 45:1. Applications include automation equipment, semiconductor equipment, and machine tools.

nMetric    Costa Mesa, CA 92626
Feb 25, 2003 4C enables managers to assess, in real time, impact of production events on short, medium, and long-range schedule commitments. Orders are continuously monitored throughout production process to assure status and provide notification to all members in supply chain if delivery expectations are not going to be met. When and if resources or demands change or might change, 4C attempts to resolve any problems that could affect delivery dates.

Syware, Inc.    Cambridge, MA 02142
Feb 25, 2003 Visual CE® for FileMaker Pro offers support for FileMaker Pro databases, allowing users to create mobile forms in minutes, then transfer and synchronize data between Pocket PCs or Windows CE devices and FileMaker Pro on desktop. Software provides way to create forms and database applications without programming. Drag and drop controls are used to customize electronic forms. Offerings include Macros, Wireless Connectivity, and Report Writing capabilities.

CML USA, Inc.    Davenport, IA 52804
Feb 25, 2003 Model EN180 adjusts to notch any angle between 0-60° degrees in pipe or tube with 1-4½ in. dia. Product produces notches in heavy or thin wall pipe or tube. Single slide handle movement allows operator to control in feed and cross feed motion simultaneously, while graduated vise pivots and adjusts vertically for offset notching. Quick-change rollers are available in multiple diameters, and wide frame design accepts up to 7 in. belt widths.

Syspro Group    Costa Mesa, CA 92626
Feb 25, 2003 Business Alerts pushes alerts to desktops of managers and other key personnel upon occurrence of pre-defined events as they are happening internally, at customer sites, or along entire value chain. It scans mission-critical information systems on 24/7 basis to notify functional areas of enterprise and supply chain in real-time via LAN, WAN, Internet, Wireless, and Fax technology. Alert messages can be configured in HTML, Text, RTF, and XML formats.

Paslode, An Illinois Tool Works Co.    Vernon Hills, IL 60061
Feb 24, 2003 Equipped with carbide-tip nose, hardened-steel driver blade, and housing wear plates, Roofer's Choice R175-C Roofing Coil Nailer drives nails flush into all roofing materials. Ergonomic tool drives up to 8 fasteners per second and accepts fasteners with lengths from 7/8–1 3/4 in. and diameters to .120 in. Adjustable shingle guide keeps roofing shingles straight and properly aligned. Features include aluminum magazine, 2-fingered trigger, and adjustable diffuser cap.

Presto Lifts, Inc.    Attleboro, MA 02703
Feb 24, 2003 P3(TM) Pneumatic Leveler, with reinforced rubber airbag and permanent spring, automatically adjusts height of pallets as boxes are added or removed. Unit supports pallet load weights from 400-4,500 lb and can be used where shop air is available. Turntable with anti-friction bearings allows loads to be rotated and fork pockets allow unit to be relocated by fork truck or stacker.

Motion Engineering, Inc.    Santa Barbara, CA 93117
Feb 24, 2003 Stand-alone motion controller, eXMP-SynqNet(TM) utilizes dual-processor architecture with scalable Celeron® processor running VxWorks, embedded NT, or other real-time operating systems along with XMP family Sharc® DSP motion co-processor. Unit includes Ethernet, up to 4 COM ports, and on-board flash memory. It supports CAN networking for integrated I/O programming using Motion Programming Interface, and up to 32 axes of servo or stepper motors across network.

Specialty Motions, Inc.    Yorba Linda, CA 92887
Feb 24, 2003 SMI products incorporate center hole on ball slides with travel of 1 in. or greater. Mounting with center hole eliminates bow on slide and strengthens mounting security. Interchangeable products are made of aluminum carriage and base with black anodized finish. Units provide straight line accuracy of 0.0001 in./in. of travel for cross rollers and 0.0005in./in. of travel for ball slides. Positional repeatability is 0.0001 in., and coefficient of friction is 0.003.

Mitutoyo America Corporation    Aurora, IL 60504 9176
Feb 24, 2003 Roundtest® RA-1400/1500 instruments are equipped with GUI which includes solid 3D modeling, graphical machine controls, and graphical measurement-analysis tools. Machines are equipped with turntables suspended by air bearings for accurate rotation and elimination of performance deterioration due to wear, with spindle error as low as 0.02 µm. Products achieve straightness of column accuracies to 0.15 µm and parallelism of column accuracies to 0.3 µm.

Brady Corp.    Milwaukee, WI 53201 0571
Feb 24, 2003 Brady Boys barrier temporarily blocks access to rooms, stairs, or other building areas. Silhouettes measure 41 in. high and interlock together to create barrier of any length. Products come with standard legend, Caution...Out of Service, imprinted across arms with No Entry symbol on hard hat. Units may also be ordered with custom legends.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Feb 24, 2003 MaxBlack laser energy probes, J25LP-MB and J45LP-MB, measure laser pulse energy from 200 µJ to 2J at rep rates to 1,000 pps from 0.19 to 11 µm. Probes perform at fluency levels up to 265 mJ/cm² at 1064 nm. Proprietary coating offers significant improvements over large-area, black-painted probes. Probes are more resistant to scratches and laser damage yet maintain features such as flat spectral response and low reflectance.

Contemporary Control Systems, Inc.    Downers Grove, IL 60515
Feb 24, 2003 Suited for hostile applications with temperatures from -40° to +75°C, EISX9-100T segments Ethernet LAN into nine collision domains, bridging data links to produce large network diameter. Each port automatically negotiates its data rate to 10 or 100 Mbps and controls data flow with PAUSE function in full duplex or backpressure mode in half-duplex. Switch learns port assignments by reading Ethernet frames and logging source addresses on table, which can hold 2048 addresses.

VXI Technology Inc.    Irvine, CA 92614
Feb 24, 2003 Model SMP6905 incorporates six 2-way 0°, 10 MHz–1 GHz power splitters/combiners in high-density, double-wide SMIPIIâ„¢ module. When used as splitter, it delivers 2 outputs of equal amplitude with 0° phase relationship between 2 output signals. Module can be used as combiner by applying each signal into output ports and vector sum will appear as single output. Model SMP6905 can be combined with other SMIPIIâ„¢ switch modules to provide building blocks for RF test system.

Worksaver Inc.    Litchfield, IL 62056
Feb 24, 2003 Model RBH-4000 handles and stacks up to two 4 x 4 x 8 ft rectangular bales or three 3 x 3 x 8 ft rectangular bales. Suited for use with tractor loaders, product incorporates heavy-duty UHMW-polyethylene bushings and five 26 in. long forged spears spaced along bottom of unit to help support bales during pick-up and moving. Unit also incorporates six 18 in. long forged spears for uprights. Each upright has 5 moveable hooks.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Feb 24, 2003 Able to test for double data rate (DDR) technologies, E2930A Exerciser and Protocol Analyzer allows users to develop next-generation servers and chipsets. Programmable protocol exerciser validates and tests compliance of intelligent I/O buses, while protocol analyzer is used to view traffic on PCI bus and debug system performance through root-cause analysis and trouble-shooting. Built-in protocol checker simultaneously tests for 60+ protocol rules in real-time.