EG & G Princeton Applied Research    Oak Ridge, TN 37830
Jan 31, 2003 PowerCORR module, part of Electrochemistry PowerSuite, performs electrochemically-based corrosion measurements with potentiostats/galvanostats. It offers 12 standard techniques, along with capability to create, modify, and save additional custom techniques. Graphics capabilities permit up to 4 different plots of same data to be viewed simultaneously on screen, as well as capability to overlay previously acquired data for comparative purposes.

Kernco Instruments Co., Inc.    El Paso, TX 79927 7338
Jan 31, 2003 Able to record productive and non-productive time, 3-channel device is equipped with time totalizers, resettable counters, and time delay features. Charts, divided into minutes and hours, are drawn upon in one continuous line, where momentary interruptions are indicated by zig in line. Also offered in 2- and 3-stylus models, unit draws concentric lines on chart for multiple machines/functions. Recording periods are offered in 3 chart speeds: 8, 12, and 24 hr.

Kernco Instruments Co., Inc.    El Paso, TX 79927 7338
Jan 31, 2003 Digital Model 2234C utilizes non-contact laser beam target method to measure rpm from 10-100,000 rpm. Reflective tape, placed on shaft to be measured, can be read from 2-6 in. away with accuracies of ±1 rpm from 10-5,000 rpm and ±0.05 rpm from 5,000-100,000 rpm. Readings are obtained once per second, and unit has memory button to recall last, maximum, and minimum readings. Product is powered by four, 1.5 V AA batteries.

Kurt Mfg. Co. Hydraulics    Lyman, NE 69352
Jan 31, 2003 Bite-type (BW) hose couplings, suited for non-skive SAE 100 R12 applications, are available in 175 standard sizes (from 8–32 SAE hose sizes) and end configurations. Made of steel in 1-piece design, fittings have corrosion resistant, zinc chromate finish. All sizes offer precision machined ferrule that bites into wire of hose when crimped, resulting in no leak system. Products handle sub-zero through high temperature applications.

New Wave Research    Fremont, CA 94539
Jan 31, 2003 Pegasus-PIV dual-head, high repetition rate, diode-pumped Nd:YLF laser system features 10 mJ of 527 nm light output at 1000 Hz, making is suitable for Particle Image Velocimetry applications. It includes dual cavity laser head, single power supply, and chiller. Laser heads may be independently triggered internally, through external TTL trigger, or by computer via RS-232. Each operates from 1–5000 pulses/sec, allowing camera frame rates up to 10,000 frames/sec.

Snap-on Industrial    Kenosha, WI 53141 1410
Jan 31, 2003 Commemorating 10 seasons partnering with Richard Childress Racing, four special edition models of auto shop equipment are being offered. Model YA3625ARCR Abrasive Blast Cabinet offers 135 cfm dust-collection system and fluorescent lighting. Model PBD3222RCR Parts Washer features 2-part filtation system. Model JC23BRCR Low Profile Padded Creeper features 1 in. padded bed and 2 in. padded headrest in 17 x 40 in. frame. Model JC24BRCR Padded Seat Creeper has 2.25 in. seat cushion, fastened to tubular steel frame.

Fairchild Semiconductor    South Portland, ME 04106
Jan 31, 2003 Model FAN7601 programmable frequency, current mode PWM controller reduces standby power losses to below 1 W. With operating frequency up to 300 kHz and operating current of 4 mA max, unit is suitable for off-line switch-mode power supply and DC/DC conversion applications. Controller includes programmable 20 mS soft start and start-up switch, overvoltage protection, thermal shutdown, and under voltage lock out.

Kubotek USA, Inc.    Marlborough, MA 01752
Jan 31, 2003 CADKEY Workshop(TM) EX Freeform Model Exchange/Solid and Surface Modeling software combines complete freeform solid and surface modeling with Import CATIA® 4, Export CATIA 4, Import Pro/E®, and Import Unigraphics® translators. Pure Geometry(TM) core enables reading/editing of wireframe, surface, or solid geometry files imported from UNIX® and Windows®-based CAD systems. It can also generate tooling, fixtures, molds, dies, and machines from customer files.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Jan 31, 2003 Connected solutions applications integrate electronic design automation software with test instrumentation enabling companies to use existing company products to verify designs earlier in process. System provides measurement-based modeling, verification, and debugging capabilities. Algorithms provide consistency between ADS simulation results and test measurement results. Software supports microwave system and component verification.

Invensys    Foxboro, MA 02035
Jan 31, 2003 Foxboro® A²â„¢ Distributed Control System features Architecture by ArchestrA. It includes Wonderware® InTouch® HMI software, which provides integrated view of all plant control and information resources utilizing intuitive, dynamic graphical displays. Specific supervisory capabilities available on as-needed basis include historian, trending, alarming, production tracking, S88-compliant batch management, and Web portal. Software supports .NET capabilities.

Genie, a Terex Company    Redmond, WA 98052
Jan 31, 2003 Electric, self-propelled model GS(TM)-2632 rolls through single access doors with 26 ft platform height and platform width of 31 in. Able to fit into tight, narrow areas, unit offers 90° turning radius, non-marking tires, and low noise level.

Metrobility Optical Systems    Merrimack, NH 03054
Jan 31, 2003 GigE redundant twister® offers primary and back-up links between two network switches, routers, or bridges and automatic failover of less than 200 msec. Radiance R200 single-slot chassis has internal power supply and supports access line cards. Chassis stacking line card manages up to 126 ports with 1 IP address, auto-negotiates 10/100 connections, and has four RJ-45 interfaces. Delta Class twister® media converter performs optical Ethernet media conversion and rate adaption.

All Sensors Corp.    Morgan Hill, CA 95037
Jan 31, 2003 Digital Output Pressure Sensors offer pressure ranges from 5 in. water full scale to 100 psi full scale. Packages are 1 in. square with 6 electrical leads and 2 pressure ports. Sensors feature 12 bit digital serial output, which is SPI and MICROWIRE/PLUS® compatible. In addition to synchronous communications, units incorporate bi-directional, TTL level, asynchronous serial interfaces mode, which is selectable at 9,600 or 19,200 baud.

Liebert Corp.    Columbus, OH 43229
Jan 31, 2003 Model XDA Air Flow Enhancer consists of 5 fans that mount to rear of 60 in. rack enclosure, and pull hot air out through cabling obstructions. Model XDV Vertical Rack-Mounted Fan Coil features waterless coolant system. It draws hot air out of rack or from hot aisle and exhausts cold air into cold aisle where air intakes are located. Model XDO Overhead Fan Coil utilizes waterless coolant system. It draws hot air into side-mounted coils and exhausts cool air vertically down into cold aisle.

APCON, Inc.    Wilsonville, OR 97070
Jan 31, 2003 INTELLAPATCH 144, layer-1, 144-port switch, utilizes wire-once technology to eliminate manual patching and re-patching and provide non-blocking, any-to-any connections at wire speed. Switch has 9-blade design, giving users scalable solution, configurable in multiple protocols and data rates within 1 chassis. Each 16-port blade engages hot-swappable SFP (Small Form-Factor Pluggable) multi-mode, single-mode, or copper transceivers.

Parker Hannifin Corp., Cylinder Division    Des Plaines, IL 60016 3198
Jan 31, 2003 Series CHH and CHL hydraulic high-pressure clamping cylinders are offered with NPT or SAE ports and have double rod end option. Extruded steel Series CHH is available in 20-80 mm bore sizes with through bolt or foot mounts. Extruded aluminum Series CHL is offered in bore sizes from 32-80 mm. For mid- to end-of-stroke position sensing, reed or Hall effect switches are available.

Parker Hannifin Corp., Cylinder Div.    Des Plaines, IL 60016 3198
Jan 31, 2003 Series SRX features internal feedback device that allows end user to continuously monitor cylinder's position throughout working stroke length. Controllers enable 4–20 mA output, or 0–10 Vdc output from feedback device. Corrosion resistant, stainless steel cylinders are offered in bore sizes of 1 1/16, 1 1/2, 2, 2 1/2 and 3 in. Mounting styles include nose and pivot mount, front block mount, and nose mount.

Greer Steel    Dover, OH 44622
Jan 31, 2003 Cold rolled strip steel thickness tolerance of ±0.00025 in. is provided on low carbon, high carbon, and alloy steels in grades from 1006-1095 from 0.020-0.187 in. thick. Various surface finishes are offered, including high luster Best Bright, Regular Bright, dull, and matte. Variety of tempers and edge types are also available.

Fujitsu Takamisawa America, Inc.    Sunnyvale, CA 94089
Jan 31, 2003 Weather-resistant product joins optical fibers to SC-type optical connectors. Walls, produced via injection molding process based on die and molding technology and proprietary plastic, are thick enough to ensure mechanical strength. Product is offered with standard OD of 2.499 ± 0.001 mm, roundness of 0.001 mm or less, coaxiality of 0.0014 mm or less, and 0.125 ± 0.0005 mm hole diameter. Optical characteristics are equivalent to Zirconia ferrule.

Coherent Inc., Laser Group    Santa Clara, CA 95054-1112
Jan 31, 2003 Producing greater than 1 mW of continuous-wave output at 375 nm, low-power ultraviolet diode laser is housed in small cylindrical package for easy adaptation and mounting. Unit is multi-layer shielded for electrostatic discharge and mechanical protection. It features large thermo-electric cooler with bi-polar linear drives, internal cooling fan with anti-vibration mounting, and back panel on-off switch with power LED indicator.