Thermadyne Industries, Inc.    St. Louis, MO 63017
Mar 05, 2003 PRO-WAVE 185TSW generates True-Square wave AC/DC output with full range capability from 185 A down to 5 A. Voltage Reduction Device prevents accidental electric shock by reducing OCV when power supply is not in use. Inverter includes Current Sloper; Current Pulser; variable frequency, wave balance control; digital AMP/volt meter; remote control capabilities; and Lift or HF assisted starting. All functions and controls are set through pushbutton switches on front panel.

Mastercam/CNC Software, Inc.    Tolland, CT 06084
Mar 05, 2003 Mastercam Router v9 can control block or gang drills, including straight and T block drills. It optimizes drilling routine, dropping correct drills according to drill pattern that is being machined. Software provides Right Angle and Compound Angle head control, allowing users to do more machining in single setup. It offers VBScript support, cabinet design software links, toolpath nesting, and high speed machining abilities, including 2D high speed pocketing.

Siemens Energy & Automation Inc., Motors & Drives Div.    Alpharetta, GA 30005
Mar 05, 2003 Offered with interface and software for configuration and diagnostics via PC, elevator starter provides all digital control using DSP processor. Offerings include adjustable current limit starting, overload projection, and miswired motor detection. Capable of 80 starts/hr, unit incorporates auto select for 6/12 lead wye delta or 3 lead motors as well as 16-character LCD display. UL/CSA/CE certified unit is also offered with infrared module and PDA software kit.

Klein Tools, Inc.    Lincolnshire, IL 60069
Mar 05, 2003 Made of Cordura® Plus material, PowerLine(TM) Series phone holders are constructed of 1000 denier Cordura Plus and 500 denier, padded Cordura Plus. Products carry small, medium, and large mobile phones in addition to other electronic devices such as PDAs, 2-way radios, and testers. Features include quick-access Velcro® flap, antenna cutout, padded pocket, securely closed bottom, and metal clip for belts up to 2 in. wide.

Sharp Microelectronics    Camas, WA 98607 9489
Mar 05, 2003 Standard Model GP2Y0D340K measures 9.6 x 15 x 8.7 mm, and has range of 10-40 cm. Features include 35 mA current consumption, trigger distance of 40 cm, and start-up delay of 10 msec with 7 msec response time. Applications include battery-operated mobile devices, industrial automation and robotics, and electronic sanitary equipment, such as faucets, soap dispensers, towel dispensers, and hand dryers.

APEM Components    Haverhill, MA 01835
Mar 05, 2003 Offered in 4, 6, 8, and 10 position models, DHS series has terminal pitch of .050 in. and contact rating of 100 mA at 6 Vdc switching. Model DHS8S (8-position) measures .468 x .244 x .087 in., while 4 position model measures .268 in. long. Auto-insertable, reflow solderable series employs self-cleaning, twin point contact design. With operating force of 400 grams max, series is suited for hand-held remotes, mobile instruments, and miniature applications.

Tobias Associates, Inc.    Ivyland, PA 18974 1433
Mar 05, 2003 TA-RIM remote ink module replacement is for use with Harris Telecolor I press console. Design allows for faster ink settings and assists in zeroing fountains. TouchConsole user interface allows pressmen to operate system without manual. TA-RIM may be coupled with EPLEX Press Presetting System to enable older version presses to be preset using CIP3 digital information.

NYLOK Corp.    Macomb, MI 48042 4007
Mar 05, 2003 Fused-On Powder Coatings prevent metal-to-metal contact, provide wear resistance, and protect against rust. Epoxy powder is applied by electrostatic spray or fluidized bed and cured in convection ovens. Nylon 11 and 12 powders are applied by electrostatic spray and cured by post heating induction process. Nylon 11 prevents galvanic corrosion between dissimilar materials, while thick coating of epoxy powder can be used on sharp metal parts to prevent cutting.

Sealflex Industries Inc.    Costa Mesa, CA 92626
Mar 05, 2003 SI-UltraTac 200 antimicrobial acrylic flooring adhesive resists up to 5 ½ lb of moisture emission without need for pH blocker/primer. One-part formulation prevents common bacteria, fungi, mold, and mildew microorganisms from growing under flooring. Adhesive can be used with vinyl sheet/tile and carpet.

PTC    Needham, MA 02494
Mar 05, 2003 Pro/ENGINEER® product design and development solution combined with Windchill® collaboration and control solutions offers essential elements of PLM designed to work as single integral system. Using this system, companies can create high fidelity digital products, collaborate throughout extended digital value chain, and control all associated product information and processes. Modular system can be deployed incrementally and is supported by packaged services.

Gowanda Electronics Corp.    Gowanda, NY 14070
Mar 04, 2003 CF1008 series surface mount inductors are for use in RF applications including wireless and portable test & measurement equipment, communications, medical diagnostic, and industrial process control equipment. Wire-wound inductors have ferrite core in place of ceramic and terminations that offer improved solderability. Device has inductance values from 0.10–100 mH and DC max current ratings from 1392–102 mAmps.

Brush Wellman Inc.    Cleveland, OH 44110 2602
Mar 04, 2003 ToughMet® consists of spinodal alloy of copper with 15% nickel and 8% tin. It exhibits stength 3 times greater than copper, yet possesses tribological properties comparable to bronze. Inherent lubricity means that bushings are unlikely to fail even if starved of lubricant. ToughMet is suitable for low speed, high load and high speed, low load applications, with continuous rotary or reciprocating motion. It eliminates galling, overheating, contamination, and bearing corrosion.

EMX Industries, Inc.    Cleveland, OH 44128
Mar 04, 2003 Series FRS and OFB offer sensing areas of 64 x 70 mm through 200 x 250 mm. They allow non-contact detection of parts as small as 1.5 mm in diameter passing through sensing area at speeds up to 15 m/sec. FRS Series incorporates microprocessor to allow insertion of transparent tube through sensing area to guide difficult to handle parts. Sensors are offered with digital outputs NPN or PNP, or with 0-5 Vdc analog output. Power requirements are 12-30 Vdc.

Delcam USA    Salt Lake City, UT 84111
Mar 04, 2003 FeatureCAM v10 can be tailored to customer's specific design requirements. It automatically creates operations from part features containing all necessary machining parameters. As well as defining shapes, features also contain machining operations required to achieve shape. User can decide which dimensions are updated when user-defined feature (UDF) is created. FeatureCAM automatically selects tools, calculates feeds and speeds, generates toolpaths, and creates NC code.

Newstripe, Inc.    Aurora, CO 80011
Mar 04, 2003 Bantam XL sprays lines, curbs, car stops, and stencils with 4 hp Honda engine, adjustable spray gun for 2–6 in. wide lines, and accessory handheld gun. Additional offerings include 5 gal, low-pressure tank and disposable tank liners. Spray gun disassembles into 5 pieces for cleanup, and entire gun can be rebuilt in field. Maneuverable unit incorporates four 10 in. pneumatic wheels and dry weight of 125 lbs.

SICK, Inc.    Minneapolis, MN 55438
Mar 04, 2003 Presence-sensing Model RLS 100 safety laser scanner, with up to 19.7 ft deep protective field and 32.8 ft deep warning field, safeguards work areas in stationary or mobile applications. Unit can be placed on one corner of machine to be guarded to protect 2 sides, simultaneously. Field size, shape, and depth can be programmed via Configuration and Diagnostic Software (CDS) tool. Product has 2.8 in. resolution at max safety field (19.7 ft).

SKF Motion Technologies    Lansdale, PA 19446
Mar 04, 2003 Series SRP Ultra Power roller screws accommodate dynamic loads up to 2,271 kN and static loads up to 11,907 kN, depending on type. Diameters range from 60-180 mm and screw leads range from 15-40 mm. Planetary timing mechanism permits high acceleration and promotes consistent functioning. Units typically include wipers and are available with axial play less than 0.1 mm. Roller screws facilitate conversions from hydraulics to electromechanical actuation.

Murdock Systems Inc.    Swansea, MA 02777
Mar 04, 2003 MS Lay-1 Revision 2.0, suited for cabling machines used in manufacturing of multi-conductor power, signal, and communication cables, operates using 100% digital PID Control and offers plug-and-play operation. Requiring no calibration, unit incorporates 2 x 20 character LCD display and 2 x 6 Keypad. Unit is available in 3 different line voltage configurations: 480 V/3-phase/60 HZ, 220 V/3-phase/60 HZ, and 220 V/single-phase/60 HZ.

BinMaster    Lincoln, NE 68507
Mar 04, 2003 SmartSonic non-contact level transmitters provide processor capabilities that offer remote display, relay outputs, and full communication capabilities. With continuous 4-20 mA output and optional RS-232/485 communication, transmitter range allows users to read levels from 0.4-90 ft in liquids and 1-45 ft in granular and light bulk solids. Units offer 2-point, push-button calibration, temperature compensation, and uniform polar pattern.

Red Lion Controls    York, PA 17406 9428
Mar 04, 2003 Suited for applications that require basic display only, PAX Lite meter offers NEMA 4X front panel, 0.56 in. LED display, field set-up capabilities, and terminal connections. Series has models for digital inputs, such as count, rate, and process time, as well as analog signals, such as volt, current, process, strain gage, and temperature.