Davies Molding, L.L.C.    Carol Stream, IL 60188
Feb 03, 2003 Model 2084 Bar Knobs measure 1 in. across top, are molded from engineering-grade thermoplastic, and feature low-gloss satin finish. Specifications include threaded brass inserts with thru-hole design and projecting studs. Five additional sizes are available from 1 ¼ to 2 ½ in.

Slide Products, Inc.    Wheeling, IL 60090
Feb 03, 2003 NEXGEN biodegradable metal and mold cleaner is formulated from citrus and vegetable products. It leaves no oily residue and rinses away with water. Product has no global-warming compounds, is not a hazardous air pollutant, is non-corrosive, and is not SARA reportable. Used as alternative to Trichloroethylene and Methylene Chloride, NEXGEN is suitable for oil-spill cleanup and remediation; ink, tar, and adhesive removal; and removing silicone and lithium grease.

Spence Engineering Co., Inc.    Walden, NY 12586-0230
Feb 03, 2003 Pressure Change Assembly (PCA) Kits for Nicholson and Armstrong inverted bucket traps are offered in orifice ratings from 15–250 psi. By stocking Pressure Change Assembly Kits along with standard sized traps, user can convert to virtually any size trap.

Quest Controls, Inc.    Palmetto, FL 34221-4802
Feb 03, 2003 Toxic and Combustible Gas Monitors sense presence of carbon monoxide, methane, and hydrogen gases and can send visual, audio, and contact-closure alarms both locally and back to centralized alarm center. With microprocessor-based electronics, monitors offer field-adjustable alarm thresholds, accessible real-time gas level values, LED alarm status, and integrated vent-fan control. Units can be used as stand alone or feed alarms back through TELSEC® Controllers.

Compaction America, Inc.    Kewanee, IL 61443 1714
Feb 03, 2003 Series BW124-3 consists of 7,275 lb smooth drum Model BW124DH-3 and 7,384 lb padfoot drum Model BW124PDH-3. They feature dual travel pumps, no-spin differential, and 50 hp, Deutz air/oil-cooled diesel engine. Rollers offer dual amplitudes and operating frequency of 2,460 vpm to achieve 19,125 lb of centrifugal force. Oscillating/articulating center joint delivers ±12° oscillation. Maximum working speed is 5.6 mph for both models.

RIDGID    Elyria, OH 44035
Feb 03, 2003 Model 117 self-acting midget cutter features spring-loaded cutter wheel with self-feeding action for automatic cutting. By tightening knob, user cuts tubing cleanly and precisely. Device cuts small diameter copper, aluminum, and brass pipe and tubing. Cutter weighs 4 oz., is adjustable from 3/16 to 15/16 in., and includes ergonomic knob for greater torque with less effort.

Extech Instruments Corp.    Nashua, NH 03063
Feb 03, 2003 High Voltage Resistance Checker, Model 380399, verifies performance of megohmmeters and insulation resistance testers, as well as other resistance measuring meters such as multimeters. It consists of 13 resistance steps from 1 ohm to 500 Mohms with 1000 V capability on 1, 2, 10, 100, and 500 Mohm positions. Measurement accuracy is 1% to 10 Mohms and 5% from 20-500 Mohms.

Unitek Miyachi Lasers    Monrovia, CA 91017 7133
Feb 03, 2003 Nd:YAG Models LW300A and LW400A offer average output power from 300–400 W. They feature real-time power feedback, 20-segment pulse shaping, power ramp-up and ramp-down, and removable touchscreen-controlled pendant. Up to 4 built-in fiber outputs can be configured in Time Share and/or Energy Share modes so critical applications can be addressed using one or more workstations located up to 30 m apart. Lasers provide deep penetration, hermeticity, and high repetition rates.

Triac Controls, Inc.    Cincinnati, OH 45242
Feb 03, 2003 Available in sizes from 1/2–6 in., direct-mount TRIAC Series D9 150# and 300# split-body ball valve features patented no-leak pyramidal stem seal and full port design. Valve/actuator package features 2-piece cast body with IS05211 automation pad and choice of electric or pneumatic actuator. Available in 316SST or WCB body material, unit comes with anti-static device. Reinforced RTFE, 5OSS/50 TFE, and other seats are available.

AutomationDirect.com    Cumming, GA 30040-9905
Feb 03, 2003 Industrial Relays, available in 24 Vdc, 120 Vac, and 240 Vac coil voltage, feature bifurcated contacts for low-current switching capability. Sockets include holding clips to secure relays and protect against accidental relay disengagement. LED indicators facilitate troubleshooting. Some relay models include internal surge protection diode to protect against voltage surges.

Schmersal Inc.    Elmsford, NY 10523
Feb 03, 2003 CE-Compliant Series SLC Category 4 Safety Light Curtain has dual 500 mA PNP safety outputs and built-in digital diagnostics. Resolutions of 14 and 30 mm are offered for protection fields of 160–1810 mm. Response times are as low as 6 msec, and range is 18 m. Each unit meets international safety standards, UL, CSA, and IEC, for safety-light curtains. Options include 6 A safety relays, muting modules, reflecting mirrors, floor stands, and vibration isolators.

Pneucleus Technologies LLC    Hollis, NH 03049
Feb 03, 2003 MicroFlo miniature mass flow controller features InSitu-Senseâ„¢ sensing technology, which incorporates microchip-sized, in-line flow transducer to achieve repeatable and stable flow regulation in 40 msec. It is specifically for gases used in chromatography, elemental analyzers, gas detectors, gas monitoring, and vacuum coating applications.

Precision Airconvey Corp.    Newark, DE 19702
Feb 03, 2003 TrimPAC(TM) cuts and evacuates edge trim from slitters and die cutters to provide clog-free conveying. Pre-engineered with in-line cutter, material handling fan, piping, air separator, and 2 inlet pickups, TrimPAC conveys film, foil, laminate, paper and other water material up to 300 ft at 5,500 fpm. TrimPAC may be customized with pedestal base, silencer, static eliminator, and range of motors to suit virtually any application.

Almetek Industries, Inc.    Hackettstown, NJ 07840 9600
Feb 03, 2003 TRIDENTâ„¢ Safety Signs are made of tri-extruded, UV stabilized, high density polyethylene. Danger, Warning, Caution, Safety First, and Notice signs are impervious to acids, alkalis, and caustic chemicals. Manufactured using no inks, paints or laminates, they will not fade, crack, chip or peel, and will withstand extreme temperatures and harmful weather conditions. Sizes include 7 x 11, 10 x 14, and 14 x 20 in. in thicknesses from .125 to .250 in.

Pacific Scientific    Rockford, IL 61105 0106
Feb 03, 2003 T-Series NEMA 23, 1.8° motors provide up to 380 oz–in. torque with accuracy of .0360 for precise load positioning. Housingless square frame optimizes magnetic circuit, reducing space required for motor and providing smooth microstepping. Standard options include leaded or terminal box construction as well as encoders and encoder mounting provisions. Shafts, gears, sprockets, leads, connectors, and windings can be customized to meet application needs.

General Micro Systems, Inc.    Rancho Cucamonga, CA 91730 3839
Feb 03, 2003 Millennium C2000, equipped with AGP graphics/video interface, incorporates 2 Coppermine-256 Embedded Pentium III processors, each with speeds to 1 GHz and 256 kbytes on-die L2 cache. Processors are connected to Intel 82443 BX or GX North Bridge, whose 100 MHz Front Side Bus provides access to up to 2 Gbytes of 100 MHz SDRAM/RSDRAM. Additional offerings include AGP connector, PCI bus, and watchdog timer. Almost all I/O is accessible via rear panel transition module.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Feb 03, 2003 SuitCase(TM) 8RC and 12RC remote voltage-control wire feeders weigh between 22.5 and 25 lb, permit wire spools in 8 and 12 in. sizes, and perform MIG and flux-cored welding with wires from .023 to 5/64 in. in dia. They are suited for construction, manufacturing, and shipbuilding applications.

Bussmann Div., Cooper Industries    St. Louis, MO 63178
Feb 03, 2003 Class J fuse holder enables direct power connections to be made through product to busbars. Offered in BUSS® Bar and panel-mount styles, 3-pole units with covers are available in 100, 200, and 400 A versions. Compact size saves busbar or panel space, while 3-pole fuse cover reduces possibility of contact with live parts. Design aids in complying with NFPA70E, Standard for Electrical Safety Requirements for Employee Workplaces.

Dickson Co.    Addison, IL 60101-4917
Feb 03, 2003 Model TK500 logs temperature and humidity measurements, while Model SK500 logs temperature only. Both feature delayed start capability, data storage of almost 4,000 sample points, and accuracy of ±1.8°F for temperature and ±2% for relative humidity. Units are slightly larger than a quarter and can be placed almost anywhere. They are compatible with Dicksonware(TM) SECURE Software for 21CFR11 Compliance.

Kubota Tractor Corporation    Torrance, CA 90503
Feb 01, 2003 Model M4800SU has 4-cylinder, 43 PTO horsepower, E-TVCS indirect-injection, liquid-cooled diesel engine. Equipped with 8-forward/4-reverse speed, partially synchronized main transmission, tractor includes range shift lever that can act as synchronized shuttle transmission between forward (low range) and reverse. Independent 540 rpm PTO uses hydraulic, wet-type PTO clutch with self-modulating engagement. Safety features include foldable ROPS and retractable seatbelt.