Polymer Laboratories, Inc.    Amherst, MA 01002
Feb 01, 2003 EasiVial kit consists of three 4 ml vials, each containing mixture of 4 pre-weighed polymer standards. Each kit contains 30 color-coded vials and characterization data for each supplied polymer. Molecular weights of polymer standards achieve baseline resolution when used with column configurations and multi-detector GPC systems. User adds solvent to vial, awaits dissolution, and can generate 12-point GPC calibration with 3 injections.

Polymer Laboratories, Inc.    Amherst, MA 01002
Feb 01, 2003 Cirrusâ„¢ v2.0 includes Data Reviewer modules for post-analysis reviewing and reporting of chromatograms and calculated results. It graphically reviews set of sample chromatograms and molecular-weight distribution plots. Result summaries for set of sample analyses can be generated with direct data transfer to third party software. Cirrus includes normalization routines, reporting options, and optional, automatic data filtering.

Polymer Laboratories, Inc.    Amherst, MA 01002
Feb 01, 2003 Model PLRP-S 3 µm column comes in 100Ã… and 300Ã… pore sizes. Media is offered packed in short columns for rapid resolution LC/MS, where complete chromatographic resolution is not required, as MS is used to provide detailed information. Longer columns in 2.1 and 1.0 mm ID are available for higher resolution separations. PLRP-S 100Ã… 3µm is suitable for peptide separations, while larger pore size PLRP-S 300Ã… 3 µm is recommended for protein analysis.

Polymer Laboratories, Inc.    Amherst, MA 01002
Feb 01, 2003 Suited for Gel Permeation Chromatography (GPC), PL XT-R is based on robotic platform and integrates sample preparation and autosampling functions. Product supports all GPC chromatographs operating in temperature range from 30-220°C. Up to 96 sample-filled vials are accommodated in blocks in X-Y array. Solvent-filled vials are subjected to controlled heating and magnetic stirring. System includes robotic arm dispenser, heated injection valve, and heated transfer line.

JK Microsystems Inc.    Davis, CA 95616
Feb 01, 2003 Programmable Flashlite 186 is built around 33 MHz 186 compatible processor. Single Board Computer offers 44 configurable digital I/O lines, 512 K DRAM and 512 K Flash memory, 2 serial ports, and console/debug port. Additional offerings include onboard 7–34 Vdc voltage regulator, two 16-bit timers, and watchdog timer. Unit supports addition of LCDs, keypads, 12-bit A/D channels, relay outputs, optically isolated inputs, and high current drivers.

Ion Physics Corp.    Fremont, NH 03044
Feb 01, 2003 Wide Band Current Monitor measures high currents with fast risetime. CM-1-MGS5 offers risetime of 20 nsec, 3 dB bandwidth extending from 0.7 Hz to 25 MHz, sensitivity of 10 mV/A, and AC saturation of 5 As. Current transformer monitors AC and pulse currents without contacting conductor, and eliminates ground-loops and interference noise. Electrostatically shielded, monitor provides output voltage equal to current times sensitivity.

Kubotek USA, Inc.    Marlborough, MA 01752
Feb 01, 2003 CADKEY Workshop(TM) V21 integrates drafting, wireframe, freeform solid modeling, surface modeling, and mechanical libraries. CADKEY Workshop EX V21 combines freeform solid and surface modeling with 4 translators, including Import CATIA® 4, Export CATIA® 4, Import Pro/E®, and Import Unigraphics®. CADKEY GraphX(TM) V21 allows user to create drawings from scratch or generate drawings from solid, surface, and polygon models that are imported from other systems.

Liberty Industries, Inc.    East Berlin, CT 06023
Feb 01, 2003 Model 4015 Peripheral Flow Horizontal Laminar Flow Clean Bench features high-velocity, return-air intake slots along side panels, front top, and front edge of work surface. Recovered return air is HEPA filtered before returning to work area. Bench is offered in 4, 5, 6, and 8 ft models. It can be fabricated from high-pressure plastic laminate, cold-rolled painted steel, stainless steel, or polypropylene. Work surface and side panels can be stainless steel or polypropylene.

Snap-on Industrial    Kenosha, WI 53141 1410
Jan 31, 2003 Commemorating 10 seasons with Richard Childress Racing (RCR), model KRL7023PJCWS workstation has stainless steel work surfaces, risers, and overhead compartments, as well as full-width, 3 and 5 in. deep drawers with 3,406 in.³ and 6,348 in.³ capacities, respectively. With wooden worksurface, model KRA5213PJCWS depicts winning RCR team vehicles, while Combination Tool Box model KRA410714PJC commemorates 3 series victories and 2003 edition No. 29 car.

Encoder Products Co.    Sandpoint, ID 83864
Jan 31, 2003 Available in operating configurations up to 248°F, Model 260 Thru-Bore Series Accu-Coderâ„¢ Encoder is offered with optional extended low temperature capability down to -40°F. Flexible mounting systems ease installation. Two inch unit can be ordered with 5/8 in. bore.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Jan 31, 2003 Series F7-M Multi-Station Level Switch is available in lengths from 12-72 in. Mounting and stem materials are offered in brass or 316 stainless steel, and float materials are offered in polypropylene, 316 stainless steel, or Buna N. Type of switch, mounting, electrical specifications, media temperature, and actuation levels are chosen by user. Switch is suitable for applications that require high/low level alarm, and pump actuation and de-actuation.

EFD Inc.    East Providence, RI 02914-1342
Jan 31, 2003 Used with air-powered dispensing systems, LB Series syringes have translucent, dark amber reservoirs that prevent UV-cure adhesives and light-sensitive assembly fluids from curing prematurely. Users can monitor fluid levels and check for bubbles in fluid. SmoothFlowâ„¢ pistons, installed after reservoirs are filled, prevent dripping and eliminate fluid waste by wiping reservoir walls 97% clean. Reservoirs are available in 3, 5, 10, 30, and 55 cc capacities.

Interpower Corporation    Oskaloosa, IA 52577-0115
Jan 31, 2003 Model 852Q2J22 Interpower(TM) 19 in. rack-mount unit provides domestic and international 1-phase power to equipment racks. It offers 10 individually switched IEC 60320 Sheet F outlets and one C20 inlet. Rated at 16 A for service at 250 Vac, unit comes with lighted rocker circuit breaker and is UL recognized, CSA certified, and TUV approved with CE mark. Various cordsets are available for connecting to equipment.

Ermanco, Inc.    Spring Lake, MI 49456 9652
Jan 31, 2003 XenoPRESSURE® provides true, non-contact accumulation and electronic sensing with built-in preset functions. Zero-pressure zones prevent products from touching one another during accumulation to protect fragile products from damage. CRUZcontrol features integral photoeye, solenoid valve, and control module, all pre-piped and pre-wired at factory. Electronic sensing and control logic are built-in, reducing field wiring and implementation time.

Fairchild Semiconductor    South Portland, ME 04106
Jan 31, 2003 Suited for use as general-purpose physical layer device (PHY) for proprietary backplanes, model FIN7216-01 offers operating range of 100 Mbps to 1.36 Gbps, redundant serial I/O, and ESD protection. Rated 2.2 W, true Quad Gbps PHY alternate source can operate at lower power when unused functions are disabled. Product withstands up to 2 KV to protect against potential chip- and system-level failure. Each of 4 channels may operate independently or aligned as one 32-bit parallel interface.

Vishay Intertechnology, Inc.    Malvern, PA 19355 0988
Jan 31, 2003 Digital 240 calculates average weights derived from multiple samples taken over short period of time. Fully calibrated unit is adjustable and can be altered to sample at rates to suit different applications. Viscous damping technology restrain movement of internal components, making it tolerant of external vibrations. Output can employ ASCII command structure, enabling communication between load cells, control systems, and systems operators.

Braun, J.G.    Morton Grove, IL 60053
Jan 31, 2003 GlassWedgeâ„¢ permits dry installation of ½ in. tempered glass in shoe moulding. It consists of plastic isolator channel, aluminum wedge, and pre-drilled aluminum shoe moulding. Isolators are slipped over bottom of tempered glass and spaced 24 in. on center. Following confirmation of alignment, wedges are hammered into place using GlassWedgeâ„¢ chisel. System self-centers, self-plumbs and glass panels are set solidly in place in minutes.

Griffin-Rutgers Co., Inc.    Ronkonkoma, NY 11779
Jan 31, 2003 Offered with open frame, modular Print and Apply Re-Pack products consist of 4 types: Wrap, Single Panel, Front and Back, and Bottom/Top Labeling Systems. Products integrate with print engines such as Sato, Zebra, and Datamax; 203, 300, or 600 dpi print heads; and Hot Stamp or Ink Jet Coding Systems. Cage style enables long, narrow labels to be applied directly to sides of products.

EG & G Princeton Applied Research    Oak Ridge, TN 37830
Jan 31, 2003 PowerCORR module, part of Electrochemistry PowerSuite, performs electrochemically-based corrosion measurements with potentiostats/galvanostats. It offers 12 standard techniques, along with capability to create, modify, and save additional custom techniques. Graphics capabilities permit up to 4 different plots of same data to be viewed simultaneously on screen, as well as capability to overlay previously acquired data for comparative purposes.

Kernco Instruments Co., Inc.    El Paso, TX 79927 7338
Jan 31, 2003 Able to record productive and non-productive time, 3-channel device is equipped with time totalizers, resettable counters, and time delay features. Charts, divided into minutes and hours, are drawn upon in one continuous line, where momentary interruptions are indicated by zig in line. Also offered in 2- and 3-stylus models, unit draws concentric lines on chart for multiple machines/functions. Recording periods are offered in 3 chart speeds: 8, 12, and 24 hr.