Acton Research Corp.    Acton, MA 01720
Feb 14, 2003 No. 3000-SI Al+SiO2 optical coating is optimized for maximum UV reflectance with greater than 89% reflectance from 250–300 nm, and broadband reflectance of 200–700 nm. Coating survives mil-spec adhesion and temp/humidity cycling and is more durable than conventional UV Al+MgF2 coatings. It is suited for N2 laser use and for analytical applications that require stability and UV-VIS reflectance. Coating can be cleaned using recommended solvents and procedures.

FloCat    Kenosha, WI 53144
Feb 14, 2003 FloCat C-YD50-C Compact Ultrasonic Transit Time Clamp-on Flow Meter measures liquids containing less than 40% total suspended solids or aeration. Non-invasive unit is offered with or without local display. It provides 4–20 mA analog output and choice of simulated turbine meter or TTL–pulse frequency output, allowing direct interface to data collection systems. UltraLink Windows®-based software allows user to configure, calibrate, and troubleshoot via notebook PC.

LAP Laser, LLC    Cincinnati, OH 45227
Feb 14, 2003 Long-range ANTARIS measures thicknesses of diffused reflection materials, as well as high-contrast colors and surfaces. Integrated circuits compensate for changing reflectivity, while digital multi-drop interface allows for single- and multi-track, or traversing measurement using single port. Sensor measures up to 18 ft at 60,000 steps resolution with accuracy better than 0.1% full scale. Sensors can be interconnected and offer readouts of 4–20 mA.

Radius Power, Inc.    Orange, CA 92867
Feb 14, 2003 Model R65 65 W single output power supply unit features universal autoranging input voltage of 90-265 Vac. Five models are available with output ratings ranging from 5-48 V, with continous output power of 65 W, and currents from 1.35-12 A. Short circuit protection, 1% Vp-p at max load, and +1% line and load regulation are included. Power supply provides full compliance to industrial and commercial EMI/EMC and safety specifications.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Feb 14, 2003 Model 116B03, for harsh environments, operates in charge mode and may be used with PCB In-Line Charge Converters, which convert signals into low-impedance voltage signals for operation with ICP® signal conditioners. Piezoelectric sensor is ac-coupled and ignores ambient, static pressure, and very slow pressure changes to monitor low-level dynamic pressures. Unit offers solid-state construction, no moving parts, stainless steel housing, and up to 6 pC/psi sensitivity.

Larson Davis Inc.    Provo, UT 84601
Feb 14, 2003 DSS uses DSIT (Digital Sensor Interface Transmitter) technology to optimize use of digital technology in structural dynamics and modal analysis measurements. Multi-channel, multi-drop, data acquisition system measures up to 64 channels per chassis. Remote DSITs perform 24-bit analog-to-digital conversion near ICP® accelerometers and transmit signals back digitally via ribbon cable. System offers 110 dB dynamic range, TEDS compatibility, and Ethernet communication.

Parvus Corp.    Salt Lake City, UT 84115 2913
Feb 14, 2003 Shock Rocksâ„¢, made of 59-durometer Silastic® silicone rubber material, reduce g-force frequencies on 3 axes by up to a factor of 10. Designed to attach to outside perimeter of 4 x 4 in. PC/104 railed card cage, Shock Rocks isolate all points of contact between removable aluminum card cage and surrounding enclosure, eliminating need for PCB standoffs/spacers. Up to 14 PC/104 modules can be securely held in shock/vibration-dampened card cage.

Kyocera Display America, Inc.    Plymouth, MI 48170
Feb 14, 2003 TFT Color LCDs have 8.4 in. diagnonal displays and include driver ICs, control circuit, and 2 replaceable CCFL backlights. They provide reverse scan capability and anti-glare, low reflection surface treatment. Viewing angle is 110° V x 130° H. VGA version offers 640 x 480 dot pixel resolution, 260 K colors, luminance of 400 nits, and 450:1 contrast ratio. XGA version provides 1024 x 768 dot pixel resolution, 260 K colors, luminance of 300 nits and 350:1 contrast ratio.

ASG, Div. of Jergens, Inc.    Cleveland, OH 44110
Feb 14, 2003 Video Microscope Boom Arm Stand provides adjustable, stable method to mount Series IS-3 inspection systems. Solid steel unit provides over 19 in. of reach and offers numerous mounting and inspection angles. Images can be viewed on computer or video monitor. Magnification is variable from 1–450x or 1–230x with manual zoom lens, based on 14 in. monitor. Camera captures 270,000 pixels of full color high-resolution. Maximum usable height is 14½ in., with 18 in. horizontal reach.

United Grinding Technologies, Inc.    Miamisburg, OH 45342
Feb 14, 2003 Model S33 utilizes digital, direct-drive, 3-phase servo motors with 40 mm dia ballscrews to power X- and Z-axes. Grinding spindle is powered by 7.5 kW motor. Universal turret wheelhead swivels manually or automatically, permitting external, internal, and face grinding of workpieces in single setup. Peripheral speed is up to 45 m/sec with infinitely adjustable speed control to 3200 rpm. Precision control permits fine adjustment of cylindricity to ±40 µm.

Link Lighting and Controls    Stacy, MN 55079
Feb 14, 2003 MultiBayâ„¢ uses 8 compact fluorescent lamps in uniform bat-wing distribution, allowing light output to be set at 25%, 50%, 75%, or 100% via cable or remote wireless control. Intelligent fixture monitors individual lamp on times in fractional output modes and rotates power to unused lamps at preset intervals. Consistent color output is offered in warm white, cool white, and daylight. Product is available in 16 in. dia, 208 W; 22 in. dia, 440 W; and 30 in. dia, 440 W units.

Progressive Machine Co., Inc.    Ringwood, NJ 07456
Feb 14, 2003 Spring Core Adapter mounts directly to shaft of Pay-Off or Take-Up machine. Pre-drilled holes permit springs to be located for either clockwise or counter clockwise slip, or no slip. Bowed spring design offers self-cleaning feature with each core removal. There are no grooves, clamps, or mechanical mechanisms where build up of core dust can reduce gripping action. Standard Core Adapters are offered in all shaft sizes and core sizes to 6 in.

Orion Research, Inc., A Sub. Of Thermedics, Inc., A Thermo Electron Co.    Beverly, MA 01915-6199
Feb 14, 2003 Capable of detecting chloride at levels of 10 ±5 ppb by ion-selective electrode, Model 1817LL On-Line Low-Level Chloride Analyzer exceeds Electric Power Research Institute (EPRI) guidelines for control of boiler water under equilibrium phosphate treatment (EPT) in system operating at 2,500 psia. EPT reduces phosphate hideout and acid-phosphate corrosion associated with it.

Thermo Electron Corp.    Waltham, MA 02454-9046
Feb 14, 2003 Dissolved Oxygen AUTO-STIR Probe works with Model 862A DO/BOD/Temperature Meter. Built-in stirrer provides vigorous sample agitation preventing oxygen stratification. Free standing probe stand functions as air calibration beaker and can store probe when not in use. Probe includes one-touch control, dual automatic temperature compensation, and low maintenance polarographic design.

Thermo Electron Corp.    Waltham, MA 02454-9046
Feb 14, 2003 AQUAfast AQ4000 Chemical Oxygen Demand System includes reactor to digest up to 25 samples simultaneously in 2 hr or less, pre-measured and ready-to-use COD chemistries in 3 ranges, and COD standards for use on colorimeters. Accurate, reproducible results are available immediately after digestion process.

Contech    Goddard, KS 67052
Feb 14, 2003 Designed for constant operation, system is automation engineered to operate inline without stopping user's existing production line. System edge trims pressure- and light-sensitive material with score slitter, and flying knife cutter locks on at web speed to cut exact length. Vacuum pick-and-place system locates itself on sheet, picks it up, and carries it to cart, which is built with multiple levels of trays that accommodate small groups of stacked sheets.

A-Z Displays, Inc.    Aliso Viejo, CA 92656 1498
Feb 14, 2003 Featuring vivid colors with 640 x 240 dots of resolution, AGM6424B series offers high brightness CCFT back lighting for outdoor and indoor viewing. PCB board is encased by Bezel for safe handling and installation. Module size is 173.0 x 73.0 x 7.0, and viewing dimensions are 156.0 x 60.0. Applications include price scanners, POS terminals, meters, gas pumps, gaming machines, video Games, vending machines, and industrial controls.

IBAG North America    North Haven, CT 06473
Feb 14, 2003 Aerostatic Colibri ZAL Series Spindles feature axial stiffness of 7 N/µm, radial stiffness of 5 N/µm, speed of 80,000 rpm, and low run out of 0.2–0.5 µm. They can be used in vertical or horizontal positions. Compact 1050 W spindles produce up to 0.125 Nm of torque. They include Coals contactor for precise position of tool above work surface, and in-process water injection through spindle. Any spindle nose required is available.

Komet Of America, Inc.    Schaumburg, IL 60193 4544
Feb 14, 2003 PCD Tools provide high speed cutting in aluminum, magnesium, and reinforced plastics. PCD tipped Endmill comes in 2-flute style in diameters of 6, 8, 10, and 12 mm and 3-flute style in diameters of 16 and 20 mm. PCD tipped straight flute Drillcut 24 drills diameters from 5-15.5 mm with standard coolant through the tool, 130° drill point, 2 flutes, 4 lands, and 5 x diameter length capability.

Global Storage Systems, Inc.    Buffalo, NY 14219
Feb 14, 2003 SureFloâ„¢ incorporates wheeled tracks set in shelf beds to provide wide track wheeled carton flow that emulates simplified site assembly of full width roller system. For installation, roll tracks snap onto extrusion hangers that are slipped over top of rack beams. With twist of adapter, product can be repositioned left or right. Vertical profiling is accomplished in similar manner, with Micro-step Connectors.