Naeco, Inc.    Absecon, NJ 08201
Mar 20, 2003 Electric, 3-wheel, counterbalance Series EFG-DF has steeringwheel-mounted LCD Information and Service Display (LISA) device that allows driver to choose from 5 individually programmed operating modes. Curve Speed Reduction System prevents possibility of tipping. Steering assembly incorporates jointed, cross-shaft axle, integral steering cylinder, and twin rear wheels. Truck handles loads from 2,500–4,000 lb, reaches travel speed of 10 mph, and offers lift speed of 91 ft/min.

Slideways, Inc.    Shrewsbury, MA 01545
Mar 20, 2003 Made from UHMW or Teflon®, Plastic Idler Components eliminate need for ball bearings and metal parts. V-belt and round belt pulleys, blind- and through-bore idlers, sheaves, rollers, and roll end bearings are made from various plastics, dependent upon desired wear characteristics. With functionally equivalent to metal parts, they produce less noise due to lack of ball bearings. Custom components can include hubs, key ways, grooves, and additional requirements.

Air Technical Industries    Mentor, OH 44060
Mar 20, 2003 Constructed of welded structural steel, compact lift table lowers down to 3 ½ in. and employs gearbox-driven screw that lifts up to 250 lb load. Sizes are available with widths of 12, 14, 15, 18, and 24 in. and lengths of 18, 19, 20, 24, 28, and 36 in. Vertical lift ranges from 10-48 in. Pushbutton remote control and adjustable limit switches are available. Stainless steel and aluminum construction are available for applications with lower weight requirements.

Meese Orbitron Dunne Co. (MOD)    Saddle Brook, NJ 07662
Mar 20, 2003 Ship Shape(TM) containers, offered in 16 standard colors and various custom colors, provide color-coded system for identification of containers and contents. Rotationally molded in one piece, seamless containers are colored throughout to retain color-coding even if scratched or scuffed. Able to safely accommodate up to 1,500 lbs, containers nest five- to seven-high when empty and can nest or stack higher in storage. Models are offered with 2- or 4-way fork entry.

Columbia Marking Tools, Inc.    Chesterfield, MI 48047
Mar 20, 2003 L-Shaped stamps feature flange on bottom that insures consistent stamp height by locating up against bottom slot of retainer stamp opening. They are .50 in. high, .31 in. wide for character sizes that are 5/32, 1/8, and 3/16 in. Any type of font can be produced on stamp. Retainers and backing plate sets range in size from 2-2.94 in. in length and from 1.31-2.25-in. wide. Metric sizes are also available.

TE Connectivity Ltd.    Berwyn, PA 19312
Mar 20, 2003 Modified elastomeric RAYCHEM(TM) NT-MIL is resistant to abrasion and physical abuse. It remains flexible without cracking at temperatures as low as -70°C and withstands temperature shock up to 200°C without dripping or flowing. Tubing meets SAE-AMS-DTL-23053/1 Class 1 & 2, and resists most oils, fuels, and other fluids, even while exposed to elevated temperatures. Inside diameters range from 1/8-4 in.

Revere Products    Cleveland, OH 44135 0311
Mar 20, 2003 QWIK-PATCH hardens for light use in 15 min and is ready for heavy traffic in 45 min, even in damp, humid, or freezing conditions. With twice the compressive strength of normal concrete, product may be used to patch any indoor or outdoor contained surface. Needing no primer or binders, product comes in 45 lb units that will patch 36 ft², 1/8 in. thick. Trowel and mixing pail are included. Applications include refrigerated rooms, loading docks, drives, and ramps.

Allegro MicroSystems Inc.    Worcester, MA 01615
Mar 20, 2003 Model ATS645 differential sensor is offered with 2-wire back-biased package, peak detecting algorithms, and automatic gain control. Digital detection of gear tooth edges provides true zero-speed, gear-tooth sensing. Product consists of single-shot molded plastic package containing single chip differential Halt-effect sensor IC, Samarium Cobalt magnet, and flat ferrous pole piece. Hall elements, spaced 1.5 mm apart, allow device to sense small gear teeth geometries.

Tru-Connector Corporation    Peabody, MA 01960 5099
Mar 20, 2003 TRU Subminiature MCX/MMCX Series are constructed of brass bodies, brass gold-plated male contacts, beryllium copper gold plated female contacts, and Teflon® insulators. Suited for SMT applications from dc to 6 GHz, 50-ohm connectors provide 750 VRMS dielectric withstanding, 1.15:1 VSWR @ 6 GHz, and conform to CEECC 22220 standards. Units are suited for automotive, GPS, test and measurement, wireless, and additional surface-mount applications.

Fenwal    Ashland, MA 01721
Mar 20, 2003 Precision Surface Mount Snap Disc Thermostats utilize snap-acting bimetallic disc as actuating element. Devices have silver contacts and can be equipped with solder lugs, wiring eyelets, and quick-connect style terminations. Available with NC or NO switching, thermostats are UL/CSA and CE approved, and are offered in automatic and manual reset versions with contact ratings up to 25 A. Units meet MIL-STD-202 for vibration and shock resistance.

Norstat, Inc.    Rockaway, NJ 07866
Mar 20, 2003 IP 65-rated 890 series features maintenance-free LEDs with rated life of 50,000 hrs. Suited for indoor/outdoor applications, unit utilizes transparent, colorless dome that takes on color only when signal is activated, achieving clear signaling effect. Housing can be mounted directly to wall or by fixing bow; connections are made through screw free clamp mechanisms with contact protection. Cable entry is possible from top or bottom of unit via M 20 x 1.5 gland.

Bustronic Corp.    Fremont, CA 94538
Mar 20, 2003 Model 101V64XM02, 2-slot VME64x backplane measures 7U high and utilizes controlled impedance stripline design. Suited for embedded computing designs, unit offers power taps for +5 V, +3.3 V, ±12 V, ±V1, ±V2, and VPC. Also included are onboard and inboard termination, distributed high frequency capacitors for each slot, and distributed low frequency capacitors. Unit incorporates stiffeners to prevent backplane bowing and has virtually zero crosstalk.

Xycom Automation Inc.    Saline, MI 48176
Mar 20, 2003 Pro-face Series LT Graphic Logic Controllers include Types B+, D, and H. Type B+ provides 32-points of I/O and Flex Network interface. Type D offers DeviceNet master capabilities with HMI. Type H is packed with Discrete I/O, Analog I/O, high-speed counter, and pulse output. Some Type H units have thermocouple or RTD inputs. All LT models include 5.7 in. LCD with HMI features. LT Editor software v2.0 supports Proportional, Integral, Derivative instruction.

APS, Inc.    Louisville, KY 40222
Mar 20, 2003 I/Gear data transport software offers platform for integration of manufacturing systems and devices. It provides real-time connectivity between PLCs, human machine interface software, enterprise software packages, barcode scanners, marquees, scales, printers, email systems, and pagers. Intuitive wizard-based screens step user through even complex connections. Flexible triggering system supports complicated data exchange rules.

Brookfield Engineering Laboratories, Inc.    Middleboro, MA 02346
Mar 20, 2003 Baths are equipped with TC Series digital programmable controllers, which provide temperature control during viscosity measurement to help ensure accurate test results and predicting product performance. Controllers, equipped with 3 adjustable, pre-set temperatures, offer full graphic display with help menus, time and temperature programming with data logging, and interface with proprietary Rheocalcâ„¢ or Rheovisionâ„¢ software for computer control.

Cooper Wiring Devices    Long Island City, NY 11101
Mar 20, 2003 Products manage delivery of voice, data, audio, and video functions to any selected area. Offerings include network enclosures; networking, distribution, and splitter hubs for phone and fax lines; cable, satellite, and antenna TV programming; computer, electronic file, printer, and Internet access; and video/audio content from VCRs, CDs, DVDs, and stereo receivers. Networking hubs include termination, 10/100 Base-t Ethernet, and Internet gateway types.

Porta-King Building Systems    Earth City, MO 63045 1211
Mar 20, 2003 Using extra tall panels, modular enclosures are suited for housing large calibration or processing equipment. Environmentally cooled enclosures protect against harsh plant environments, while solid, panelized ceiling system sits directly atop walls to provide sound and climate control. Over-sized doors offer convenience in transporting materials in and out of controlled environment. Layouts can be reconfigured and moved due to enclosures' modular nature.

Penco Products, Inc.    Oaks, PA 19456 0378
Mar 20, 2003 Clipper® Shelving utilizes Hi-Performance® shelves to maximize load handling capacity. Open-type shelving is suitable for general-purpose use. Closed-type shelving units are covered on 3 sides with steel panels to provide stability, protection, and cleanliness for stored items. Clipper shelving can be ordered with full height, partial, and sliding dividers, as well as bin fronts and label holders. Sliding and swinging doors and modular drawers are available.

SSI Equipment Inc.    Buffalo, NY 14240 1594
Mar 20, 2003 Simplex Cast Basket Strainers are available with filtration down to 5 microns. Cast iron, bronze, carbon steel, and stainless steel bodies are available in sizes from ½â€“20 in. with flat faced, raised face, butt-weld, threaded (NPT), or socket-weld connections. Baskets may be finished in monel, Hastelloy C, or custom materials, in addition to standard stainless steel.

WSF Industries Inc.    Buffalo, NY 14217
Mar 20, 2003 Custom-built systems are offered in horizontal or vertical configurations with simple or sophisticated controls, including programmable controls for pressure and temperature variations. Features include Rapidoor® quick access, pressure chamber closure and Rapid/Loader® mechanism for exterior loading/unloading without need for pit, bridge, or external piggyback cart.