Hex Valve, Div. Of Richards Industries Inc.    Cincinnati, OH 45209 2329
May 19, 2003 Model HN41 straight-through, bi-directional needle valve features soft seat, ensuring repetitive bubble-tight sealing in both standard and dirty process conditions. Unit meets requirements of NACE MR-01-75 and is equipped with Delrin® seat and stainless steel material. Valve is rated at 6000 psig at 200°F. Sizes include ¼ x ¼ in. FNPT, ¼ in. FNPT x ¼ in. MNPT, ¼ in. FNPT x ½ in. MNPT, ½ x ½ in. FNPT, and ½ in. FNPT x ½ in. MNPT.

Vantico Inc.    East Lansing, MI 48823
May 19, 2003 RenInfusionâ„¢ 8615/Ren® 8615 low viscosity epoxy is formulated for resin infusion. Transparent, 2-component material features viscosity of 550 cps and offers extended 20-hour gel time for use in large projects. Once cured, product features Shore 87D hardness, flexural strength of 10,000 psi and flexural modulus of 430,000 psi.

Millennium Tiles    Barrington, IL 60010
May 16, 2003 Made from 75% recycled type 304 stainless steel, permanently colored roofing tiles feature Zappone 4-sided interlocking design that delivers protection against moisture and wind lift. Shadow cup adds dimension, enhances noise absorption, and allows tiles to be walked on during installation. Weighing 89 lbs per 100 ft², tiles are engineered for endurance in all climates and conditions. Tiles can be applied over existing asphalt roofing.

@Last Software    Boulder, CO 80302
May 16, 2003 SketchUp v3.0 takes design ideas from initial concepts through detailing and documentation. It allows creation of curved surfaces and appearance of smooth surfaces without learning advanced modeling techniques. Design can be shared via e-mail and printing or export for use in CAD, 3D modeling and rendering applications. Integrating SketchUp images into client presentations is easy with output to EPS, PDF, and VRML files for use with vector illustration software.

GarrettCom, Inc.    Fremont, CA 94539
May 16, 2003 Standards-based S-Ring™ allows fast fault recovery in ring topologies while working in conjunction with standard Spanning Tree Protocol algorithms. It enables Magnum 6K Series of Managed Switches to simplify and speed up recovery from faults in Ethernet LAN configurations that use ring structure. Using Bridge Protocol Data Units, interruption of which signals ring fault, S-Ring protocol forces immediate re-routing in ring, effecting renewed data flow around fault in 1–2 sec.

Whirlpool Corp.    Benton Harbor, MI 49022
May 16, 2003 Gladiatorâ„¢ GarageWorks is comprised of modular products, some of which have stamped metal tread plate design theme. GearWallâ„¢ panels incorporate grooved channels that hold additional products: Wall GearBox, various hooks, shelving units, and storage baskets. Offered in 6 or 8 ft versions, Modular Workbench has heavy-duty steel frame, weather-tested design, and ample space beneath it to accommodate modular components that dock beneath/around workbench.

Badger Tag & Label Corp.    Random Lake, WI 53075
May 16, 2003 Tags and Labels resist heat up to 400°C for several hours. Material remains consistent color, can be written on, and can be printed on with static barcode. Variety of size options as well as finishing techniques such as reinforced holes and consecutive numbering are available. Tags and labels on Nomex® stock are suitable for steel springs in mattresses, heat-treating facilities, foundries, and steel/metal fabrication.

Endress + Hauser Inc.    Greenwood, IN 46143
May 16, 2003 Series iTEMP® Transmitters are offered in field, DIN-rail-mounted, and hockey-puck styles, ranging from PC-programmable devices to HART® devices. Model TMT 164 HART® transmitter is capable of single and dual sensor input. Easytemp hermetically sealed thermometer offers 4–20 mA output and freely programmable measurement range. It includes potted sensor plus transmitter with variety of process connections to match application.

TrynEx International / SweepEx Division    Warren, MI 48089
May 16, 2003 Suited for cleanup of wet or dry materials, SweepEx MegaPlus series is offered with task packages for multiple service vehicles. With choices ranging from skid-steer sweeper, forklift sweeper, and 3-point-hitch sweeper, product is packaged with necessary attachment hardware and accessories suited for each application. Constructed of industrial-strength steel with heavy-duty powder coat finish, brooms utilize 11 polypropylene brush rows and have 72 in. working width.

Permabond    Somerset, NJ 08873
May 16, 2003 Type LL499 dual cure adhesive is used for bonding, sealing, and potting metal and plastic components. It cures when exposed to UV light, and will continue to cure by exposure to ambient or surface moisture. Translucent, light blue product has viscosity of 3,100 cP and shelf life of 3 months when stored at 77°F. Sizes include 30 cc syringe and 6 oz cartridge. Adhesive can be dispensed using 16-20 gauge dispensing tip.

Trion Industries, Inc.    Wilkes Barre, PA 18702 6997
May 16, 2003 Shelf Worksâ„¢ Expandable Tray Shelf Management System uses purposely oversized Pusher Paddles to improve branding and to cross-sell other merchandise. While loaded, system maximizes product visibility, keeps products permanently faced, enhances category integrity, insures coherent presentation, and increases impulse buying. When lane is empty, branded paddles continue to promote product and brand, and can point out alternates and substitutions.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 16, 2003 Series 616C Differential Pressure Transmitter consists of 2-wire, compact unit with 1% FS accuracy. Available ranges include 0-3 in. water column up to 100 psid. Series also includes units with bi-directional ranges.

Dwyer Instruments, Inc.    Michigan City, IN 46361
May 16, 2003 Series P3 incorporates piston design consisting of hermetically sealed SPST NO reed switch. Inlet and outlet port can be 3/8 in. male NPT or ¼ in. male Quick Disconnect. Quick Disconnect acetal adapter is user selectable for straight through flow or with shut off valve. Shut off valve will stop line flow when adapter is removed from switch, and flow will resume when adapter is reconnected.

Techno Linear Motion Components    New Hyde Park, NY 11042
May 16, 2003 Series LP includes PCI card for PC, power amplifiers, power supply, and SAC Motion Control software for programming motion functions. Lines, arcs, I/O, conditional, and logical statements can be used to create motion profiles from simple to complex. System is suited for dispensing, soldering, inspection, automatic screw fastening, pick and place operations, or automotive applications. Two DC brushed servo motors and 1 DC brushed servo motor with brake are included.

Steinmeyer Inc.    Bedford, MA 01730
May 16, 2003 Engineered for smooth, quiet motion at high speeds, Quiet Ball Screws minimize noise because nut uses end cap ball returns machined from plastic. Offered in 6 diameters from 5–20 mm and pitches from 2–32 mm, products are available with or without backlash and in choice of 2 accuracy grades: T5 ground thread and T7 rolled thread. Steinmeyer Combination Wiper system, consisting of labyrinth seals and felt wipers, protects against contamination.

Mitsui Seiki, USA    Franklin Lakes, NJ 07417
May 16, 2003 Model VL 50 offers speed and motion control necessary to perform high-speed point milling in multi-axis contouring applications. Linear technology provides geometric and positioning accuracies, while low-heat, counteracting, permanent magnet linear motors eliminate mechanical backlash, vibration, and noise. Product has X, Y, Z work envelope of 16 x 12 x 8 in. and offers traverse and cutting feed rates in all axes of 1,574 ipm. Spindle speeds range from 300-30,000 rpm.

Triple E Corp.    Lowell, MA 01852
May 16, 2003 Solid aluminum handles, for VME, VME64X, VXI, PXI, and cPCI front-panel applications, survive virtually unlimited injection/ejection cycles and withstand over 150 lb of force without bending or breaking. Handles up to 16HP wide with dual or quad cams are available, ensuring safe and secure engagement/disengagement without damage to front panels, connectors, or circuit boards. IEEE 1101.1- and 1101.10-compliant handles provide U-height conformance, even in open position.

AMETEK Test & Calibration Instruments    Largo, FL 33773
May 16, 2003 JOFRA AMC 900 benchtop unit provides base calibration for handheld instruments. It features backlit display, external pressure module capability, and RS232 and IEEE488-2 interfaces. JOFRA ASC 300 handheld calibrator offers graphical user interface, 3-function keys, numeric keypad, backlit display, external pressure module capability, simultaneous isolated read-back, and computer interface through ASCII commands. JOFRA APM pressure modules offer extended pressure capabilities.

VSI, Voelker Sensors Inc    Palo Alto, CA 94306
May 16, 2003 Inline Oil Insyte continuously monitors oil additive performance, oxidation, and soot contamination in test-lab engines. It measures oil breakdown as it happens, independent of base type or additive package. Product incorporates oxidation and soot systems that can be used in complement with oil sampling and analysis or alone. System includes sensor element, mechanical interface, and signal-conditioning unit. No standards or calibration are required.

Carlisle Coatings & Waterproofing, Inc., Hardcast Div.    Wylie, TX 75098-1239
May 16, 2003 Barricoatâ„¢ water-based asphalt emulsion, modified with synthetic rubber and additives, forms monolithic, flexible membrane without use of primers. Waterproofing and vapor-retardant membrane can be applied to concrete, CMU, wood, and metal. Non-flammable, solvent-free system is offered in 2 types: Barricoat-S single-coat spray application, and Barricoat-R double-reinforced roller applied system.