Palmgren Steel Products    Chicago, IL 60617
May 22, 2003 Grinders and Buffers provide de-burring, stock removal, and cleaning of rust and scale. Long life motors offer 88+ minutes of continuous use at full load with less than 1% rpm loss from stated maximum. One grinder model includes variable speed control for lower speed applications. Tool rests on grinders tilt for angle grinding.

Komatsu America International Company    Vernon Hills, IL 60061
May 22, 2003 Model PC160LC-7 features 110 hp Turbocharged SAA4D102E-2 engine and 74 gal fuel tank. Equipment Managing Monitoring System monitors critical fluid levels and components. Active Mode provides maximum power, Economy Mode reduces fuel consumption by 25%, Lifting Mode increases hydraulic pressure by 7%, and Breaker Mode provides optimum engine rpm and hydraulic flow. Excavator is capable of lifting 3.14 tons 15 ft high and reaching 20 ft.

Eriez Magnetics    Erie, PA 16506
May 22, 2003 Drawer and Wing Grate Magnet, with Ceramic or Erium® 3000 Rare Earth magnetic tubes, provides solution to coarse scalping of nuts and bolts or removal of fine metal containment from free-flowing product applications. Built of stainless steel components and continuously welded frame and tube assemblies, drawer integrates into existing hopper-and-chute systems and is available in staggered, 2-tier designs.

Witte Co., Inc., The    Washington, NJ 07882
May 22, 2003 Dryers and coolers incorporate stainless steel decks that permit intimate product contact with drying air. Wedge-wire decks, with tapered slots measuring 1/100 in. on 1/8 in. centers, replace drilled-hole decks. Triangular-wire construction establishes immediate openings for airflow that prevent blinding and ease cleaning, while gentle airflow prevents product degradation, promotes product advance, and ensures plug flow.

EZE-LAP(TM) Diamond Products, Inc.    Carson City, NV 89721
May 22, 2003 Diamond Sharpener Chisel Care Kit contains everything necessary to sharpen chisels, plane irons, and router bits. Kit includes 2 x 6 in. sharpening stone made with process that bonds industrial diamonds to stainless steel alloy. CCKF model features Fine Grit stone, while CCKSF model utilizes Super Fine Grit stone. Each kit has Chisel Guide to hold blades at steady/repeatable angle during sharpening and 12 x 12 in. Tuf-Clothâ„¢ for protecting fine steel blades.

Lumex Inc.    Carol Stream, IL 60188
May 22, 2003 Model SSB-COB6929SGW7900 uses 50 LEDs to illuminate LCDs and other displays that require uniform light over an area of 2.83 x 1.18 in. Product offers immunity to shock and vibration and requires minimal physical space. With LED chips and light-management packaging, backlight emits light from primary face as well as from its sides. Unit measures 0.26 in thick with 72.5 x 30 mm footprint. Any color of backlight can be generated through selection of LED chips.

Aromat Corp.    New Providence, NJ 07974 1507
May 22, 2003 With accuracies of 0.1% RTD, 0.2% for thermocouple sensors, CE- and UL-approved KT series employs PID and Auto Tuning algorithm for minimized overshoot. Universal input can be configured from front panel to be RTD, thermocouple, voltage, or current, with 26 total selectable ranges. Two-colored LED display distinguishes measured temperature value from set point. Control output types are relay, voltage, or 4-20 mA analog output. DIN-mounted Model KT7 measures only 0.89 in. wide.

Komatsu America International Company    Vernon Hills, IL 60061
May 22, 2003 Powered by Tier 2 compliant SAA6D102E Komatsu engine, WA250-5 wheel loader incorporates transmission that allocates only as much power as needed for application at hand. Also included: pressurized cab that reduces noise levels to 70 db (A) and multi-function mono lever PPC hydraulic system. Tool carrier model WA250PT-5L, with parallel linkage design, includes same features as WA250-5, with additional benefits of parallel lift and hydraulically actuated quick coupler.

Totalcomp Scales & Components    Fair Lawn, NJ 07410
May 22, 2003 Universal Series TC-210 offers backlighted LCD display, accumulation and sequence numbering, and multi-unit selection including lb, kg, pcs and %. They are expandable with multiple RS-232C I/O interfaces for computer, and tape or label printers. Fast microprocessor provides immediate weight or count display results. Scales include built-in weighing platform, built-in clock display or print time and date, and can be made portable using rechargeable battery.

KARLAN TOOL CO.    Mamaroneck, NY 10543
May 22, 2003 Product is suited for making of small flat parts, die/mold parts, EDM electrodes, and slitting from any machineable material. Layout is precisely followed thru 8 power (Hastings Triplet) illuminated magnifier. Unit uses standard 5¼ in. jewelers saw blades or diamond wire blades to enable users to make small, multipunch, stamping dies. It also lets users make die plate and female electrode together for perfect punch/dieplate fit.

Ideal Industries, Inc.    Sycamore, IL 60178
May 22, 2003 Model 45-349, capable of removing jacket from simplex and duplex 3 mm zip cord cables, incorporates precise knife-type, form-ground blades that cleanly penetrate outer jackets. Underlying Kevlar strength member and fiber are left undamaged to ensure optimal connections. Contoured, comfort-grip handles reduce operator fatigue.

Elma Electronic Inc.    Fremont, CA 94538
May 22, 2003 Chassis/cabinet mounted slide rails are available in 3 sections: outer-mounting bracket to cabinet, inner-mounting bracket to chassis, and center-sliding member. Measuring 10 mm thick, rails handle loads up to 220 lb. Brackets extend in length from 580–800 mm, with rollers providing smooth movement. Dual sets of holes are provided for additional strength and durability, while rear brackets attach to exterior rail members in adjustable locations.

NKK Switches    Scottsdale, AZ 85260-3420
May 22, 2003 Series HB2 quiet actuation, subminiature illuminated switches feature Sliding Twin Crossbar contact mechanism, which self-cleans with every actuation. Crimped power terminals ensure secure PCB mounting and prevent dislodging during soldering process. SPST momentary switches are rated 0.4 VA max at 28 Vac/dc max. Body measures .669 in. from PCB to top of cap. Housing is .307 in. square with .295 in. square cap. User can specify red/green or red/yellow bicolor LEDs.

StockCap    Arnold, MO 63010
May 22, 2003 Rubber Seal Plugs, made of material blend that reseals after needle insertion of gases, incorporate tab for easy removal. Hole in tab permits use of plunger to insert gas. Plugs suit air conditioning and refrigeration industries where applications include compressors, copper tubing, dryers and filters. Variety of lengths and diameters are available.

Eaton Corporation    Raleigh, NC 27615
May 22, 2003 Offering 6 configuration options, T982 Series allows users to customize design to meet unique needs. Measuring 1U high, 7 in. deep, and 19 in. rack-mount, product has circuit breaker protection and surge suppression. Total of 12 NEMA style receptacles on unit distribute power to devices. PDU can be configured with straight blade or locking receptacles and plugs. Incorporated 2-digit, digital display on front panel shows current draw of connected equipment.

Allsafe Co.    Buffalo, NY 14212 1511
May 22, 2003 Designed to protect workers from exposed rods, rebar, pipe-ends, and stems, PC-110 BarGard® Protector Caps help prevent serious injury and resulting lost time. Products meet CAL OSHA Standards and fit Rebars #3–8, 3/8–1 in. dia. Bright lime green in color, visible products stand up to weather and temperature conditions. Installation requires users to slip-on product and lock it into place.

BEI Sensors (BEI Industrial Encoders)    Goleta, CA 93117
May 22, 2003 Ultra-Tough code-disc option provides full precision of measurement, while offering resistance to environmental and handling shock. Available in industry-standard H25 and HS35 packages, product uses materials and technology found in aircraft and military vehicles. Encoders operate over full temperature range from -40 to +105°C.

Technology Dynamics Inc.    Bergenfield, NJ 07621
May 22, 2003 Single-output, 1U, switch-mode power supplies are available with universal input, pfc standard, or 24 or 48 Vdc input. DC input models provide 5, 12, 24, and 48 Vdc output in 1.65 x 5 x 9 in. case size, which is 8 W/in.³. Units are available with standard terminations or hot swap connectors. Measuring 1.65 x 5 x 11 in., AC universal input units are also available in standard or hot swap configurations.

Technology Dynamics Inc.    Bergenfield, NJ 07621
May 22, 2003 All single output power supplies have universal input and can operate at full ratings from -30 to +70°C with derating, except 4,000 W package, which requires 3-phase input. Packages include TCP 600P, TCP 800P, TCP 1200P, NTDM2K, and NTDM4K, which provide 600 W, 800 P, and 1,200 PW, 2,000 W, and 4,000 W respectively. TCP 600P, 800P, and 1200P measure 2.6 x 5.25 x 11.5 in.

Inpro/Seal Co.    Rock Island, IL 61204 7331
May 22, 2003 VBXX-MTâ„¢ protects machine tools from coolant, chips, humidity, and heat that can cause spindle malfunction and unscheduled downtime. Based on VBX technology, unit combines non-contacting labyrinth seals with reverse interface that avoids direct impingement of coolant and chips. Technology also eliminates humidity ingress when spindle is at rest, while contact technology positively seals at shutdown, but operates without contact while running.