Davis-Standard, Killion Specialty Systems    Pawcatuck, CT 06379
Jun 04, 2003 Super Blue(TM) extruder comes in 2, 2½, 3, and 3½ in. sizes, each with 24:1 UD ratio. Extruder has low noise, high torque double-reduction gearbox, cast aluminum finned heaters, brushless AC drive and motor, and air cooling system. Machine has structural steel construction, and wear-resistant bimetallic barrel designed for 10,000 psi. Applications include tubing, basic wire, cable, and film.

ERNI Electronics, Inc.    Midlothian, VA 23112
Jun 04, 2003 Fully insulated, Series LDG-S enclosures provide base part with integrated ventilation slot for heat dissipation. To allow termination of cable conductors, they are offered with pluggable terminals for easy exchange and screw terminals for fixed termination. Version is available for bus applications with maximum 4 signal and 2 power contacts. Installation widths include 22.5 mm and 45 mm.

ACCPAC International Inc.    Pleasanton, CA 94566
Jun 04, 2003 ACCPAC Insightâ„¢ is fully integrated to back office business applications and provides reporting, budgeting, consolidations, and scheduling from accounting systems and non-financial data sources throughout enterprise. Reports can be viewed in Microsoft Excel, and more advanced viewing, including cross-module drill-down analysis, can be done with ACCPAC Insight Viewer's MS Excel add-in or from Web browser using optional Web Deployment Server.

Quaker Chemical Corporation    Conshohocken, PA 19428
Jun 04, 2003 Quintolubric® 855 is based on a natural ester, genetically engineered rapeseed oil. High viscosity index makes it appropriate for replacement of both ISO 46 and ISO 68 grade fluids. Quintolubric® 855 is fire resistant and biodegradable. It offers lubrication level of premium anti-wear hydraulic oil, and is compatible with hydraulic components from major manufacturers.

Danaher Controls    Gurnee, IL 60031
Jun 03, 2003 Model TSS Talon Surge Suppressor for AC power circuits is installed at main service entrance, distribution panel, or subpanel to protect facilities from transient voltage damage. It is MOV-based, and rated 40 kA of 8 x 20 µs surge current for each mode of protection. Unit is available in typical distribution panel voltages from 120/240 Vac, split-phase to 277/480 Vac, 3-Phase.

Siemens Energy & Automation, Inc.    Alpharetta, GA 30005
Jun 03, 2003 SITRANS LR200 is a two-wire, loop-powered, pulse radar instrument for chemical plants and tank farms. Device features alpha-numeric display for programming and Uni-Construction rod antenna, which has internal, integrated shield that eliminates nozzle interference. Low frequency of 6.3 GHz is suited to liquid level measurement and high signal-to-noise ratio provides signal for measuring range to 20 m.

Datastick Systems Inc.    Santa Clara, CA 95050
Jun 03, 2003 Multi-channel, low- and high-speed, analog data acquisition modules plug into Meazuraâ„¢ ruggedized Palm Poweredâ„¢ MZIO expansion slot. Sensors provide analog-to-digital conversion and signal conditioning. Measurements are viewed on Palm OS® software products, which display sensor output from up to 4 channels in real time, in 4 different views. Datastick Connection Plus adds alarms, level-sensitive recording, and linearization algorithms.

Emerson Electric Co.    St. Louis, MO 63136 8506
Jun 03, 2003 Elastomer-seal, 2-position, Downport Brooks® MFC integrates with surface-mount components for industrial applications. Product locks into 1½ in. ports and occupies only 2 positions on substrate system. Unit connects to components without need for adaptor plates. Elastomer surface-mount components, based on Integrated Gas Component, allow users to gather data directly from sample point in analytical systems.

Faraday, LLC    Tecumseh, MI 49286
Jun 03, 2003 MPC-1500 Plus intelligent fire-alarm control panel employs UL-approved driver circuit. Loop circuit can operate with straight-laid, non-twisted, non-shielded wire in retrofit applications. Panel features 80-character LCD display, analog addressable detection, programming, and memory capability. It accepts expansion modules to include up to 8 D/B initiating zones. Operating controls and indicators are mounted on door, with mylar label for identification.

Siemens Industry, Inc., Building Technologies Division    Florham Park, NJ 07932
Jun 03, 2003 Device Program Unit, for diagnostic testing of fire detectors, is for programming MXL and XLS devices and testing XLS circuits and may also be used as XLS loop circuit driver. Unit operates on rechargeable NiMh or Alkaline batteries, has optional label printer, uses FLASH memory, and has backlit screen. Unit has DB-3S base adapter for testing and programming ILI and ILP series detectors.

Radar Engineers    Portland, OR 97220 1345
Jun 03, 2003 Model 1665 plugs into most arc-reflection filters to pre-locate faults on buried primary power cables. Software automatically sets range at turn-on, captures and holds fault trace at instant of thump, and automatically displays distance to fault on large color display. Fifteen waveform memories are available. Model 1665 includes RS232 port for computer interface and operates on 115/230 Vac, 50/60 Hz.

Accumetrics Associates Inc.    Schenectady, NY 12305
Jun 03, 2003 Model AT-5000 EasyAPP miniature, battery-powered digital telemetry system can be applied to rotating shafts of diameters greater than 0.9 in. with Kevlar® straps. Equipped to measure strain, torque, temperature, and other bridge-conditioned sensors, system fits in tight spaces, runs for up to 800 hr on miniature batteries, and operates in environments up to 85°C. Kevlar strap has tensile strength of 3,000 lb and can withstand over 14,000 rpm.

Komarek Inc., K.R.    Elk Grove Village, IL 60007-5413
Jun 03, 2003 Model B-050 bench-scale, laboratory roller press can provide conclusive compaction tests on various materials with samples as small as 7 oz. Assemblies in contact with materials being tested are stainless steel and removable for cleaning and sterilization. Vertically paired compacting rolls apply max roll force of 50 kN, with 750 Nm roll torque. Throughput rates up to 55 lb/hr are possible. Electrical panel provides outputs to data acquisition system.

Strahman Valves, Inc.    Bethlehem, PA 18020
Jun 03, 2003 Model QSV-700 Quik(TM) Sampling Valve enables liquid flow to be regulated during sampling process, eliminating need for flow to be turned on or off. Fail-safe, spring-to-close mechanism, ensures that handle closes valve when released. ANSI Class 600 valve measures 7 x 2 in. and fits in tight configurations. It features 45° outlet for large flow capacity, ¾ in. inlet, bubble-tight shut-off, and soft-seat design. Valve handles all fluids except those with suspended solids.

Adams Rite Mfg. Co.    City Of Industry, CA 91749
Jun 03, 2003 Latch Pullâ„¢, for narrow-stile aluminum doors, offers flexibility of traffic control during and after business hours for buildings that require free entrance at certain times and controlled, exit-only access at other times. It provides one-handed operation and 2 modes, which result in locking or latching of door. Unlocked via key, device is available in 3 painted finishes, has electrification option, and is ADA compliant. It is adaptable to use with 5-, 6-, or 7-pin lock cylinders.

Intek, Inc.    Westerville, OH 43082 9057
Jun 03, 2003 RheoVac DR uses dual probe system to provide real-time monitoring of air flow and water vapor flow under vacuum, allowing users to positively determine when drying is complete. Unit also monitors pressure, total mass and actual volumetric flow, relative saturation, and temperature. Unit offers backlit display, operating pressure range of 0–29 in. HgA, operating temperature range of 40 to 160°F, and max temperature of 210°F.

Peer Bearing Co.    Waukegan, IL 60085
Jun 03, 2003 Series GR bearings, with GRIP-IT design, provide 360° of equalized locking contact to shaft, eliminating shaft offset and reducing vibration and noise during operation. Bearings can be removed or repositioned without marring shafts. Able to lock in bi-directional applications, self-aligning products can replace both setscrew locking and eccentric-collar locking bearings.

Makino Machine Tool Co.    Mason, OH 45040 9695
Jun 03, 2003 Utilizing out-of-cut technology to reduce part cycle times, model a61 has X-, Y-, and Z-axis travel of 28.7 x 25.6 x 28.7 in. and work zone of 32 x 36 in. Pallet size is 19.7 in., max load capacity is rated at 1,540 lbs, and rapid traverse and feedrate are 1,970 ipm. Using Geometric Intelligence servo control with Radical Mode, unit comes equipped with tool monitoring capabilities; 40-taper, 12,000 rpm spindle; and ring-type, 40-tool magazine standard.

Logansport Matsumoto Co.    Logansport, IN 46947
Jun 03, 2003 Operating at speeds to 7,000 rpm, GHA6-8-66 consists of one 8 in., 3-jaw chuck with 66 mm through hole. Clamping repeatability is less than 10 microns. Additional offerings include proprietary and Matsumoto hydraulic power chucks, cylinders, and wheel chucks; rotary tables for single- and multiple-axis CNC machinery; Atling steady rests; and Neidlein face drivers. Unit permits machining at feed rates required for cutting aluminum and is suited for machining steel.

Porta-King Building Systems    Earth City, MO 63045 1211
Jun 03, 2003 Custom-designed Durasteel cashier booths are constructed to fit users' specific site measurements. Constructed to compensate for any obstruction, products offer seamless construction, climate control units, and built-in transaction windows.