Beckwood Press Co.    Saint Louis, MO 63026 2405
Aug 13, 2003 One hundred ton hydraulic press is used for trying out variety of dies for forming, stamping, and draw applications. It offers small bolster footprint of 24 x 24 in., and includes 0–20 ton bed cushion with 6 in. stroke. Built-in decompression hydraulics are provided for stamping operations. Dynamic Force Control allows for zoned control of cushion and ram forces during draw applications.

Indigo Systems Corp.    Santa Barbara, CA 93111
Aug 13, 2003 ThermaSTATâ„¢ combines Omegaâ„¢ infrared camera with WinSoft's self-calibrating software and hardware package. Portable system non-invasively images facial area of subject in real-time and automatically self-calibrates to ensure accurate skin temperature readings. Alarm alerts operator when reading is outside pre-set value. System includes desktop stand module or optional wall mount. It is suited for airport transit points, seaport boarding areas, or building entrances.

Ansoft Corp.    Pittsburgh, PA 15219
Aug 13, 2003 Model database for SIMPLORER® multi-domain system simulation software, includes more than 4,000 predefined models of commercially available components from industry-leading manufacturers, including International Rectifier, Maxwell Technologies, On Semiconductor, Analog Devices, and Infineon. Models include MOSFET, OpAmp, Diodes, Multiplexer, BJT, Rectifier, Ultracapacitors, IGBT, and JFET.

Power-IO    Naperville, IL 60563
Aug 13, 2003 Solid-state contactors accept 4–20 mA signal and convert it into time proportional output. With high-speed cycling capability of twice per second and set-point resolution of 0.5 sinewave, products reduce thermal stress and include finger-safe caged terminals, integral heat sink, and universal mounting bracket for DIN-rail or bolt-on installations. Products are available in single-phase models of up to 25 or 40 A and in 3-phase models up to 25 or 35 A per leg.

Power-IO    Naperville, IL 60563
Aug 13, 2003 Power switching products accept 0–5 k potentiometer signal and convert it into time proportional output. With cycling capability of twice per second and set-point resolution of 0.5 sinewave, contactors reduce thermal stress and include finger-safe caged terminals, integral heat sink, and universal mounting bracket for DIN-rail or bolt-on installations. Products are available in single-phase models up to 25 or 40 A or three-phase models up to 25 or 35 A per leg.

Komo Machine, Inc.    Sauk Rapids, MN 56379
Aug 13, 2003 Router-CIM 2004 lets operators design parts directly or receive CAD drawings from design software packages and distribute drawings to create machine production information. It offers push-button functionality for programming of CNC routers and interactive learning capabilities. Software incorporates Avery Label Pro® labeling system, built-in scrap management software, automatic backside programming, true-shape nesting, and ability to accept data from industry-standard software.

Magid Glove & Safety Mfg. Co.    Chicago, IL 60639
Aug 13, 2003 Gemstone® Myst Style No. Y10CFC is lightweight with clear lens and clear frosted temples. Hardcoated polycarbonate lens provides scratch and impact resistance. Myst Style No. Y10GFGY is available in gray. Additional Myst styles include No. Y10CFAFC with anti-fog lenses and No. Y10CFIO with indoor/outdoor lenses. All styles are available in 12 packs.

VSM Abrasives Corp.    O'Fallon, MO 63366
Aug 13, 2003 Cool cutting SK840F consists of coated abrasive that provides continuous grain regeneration and self-lubricating grinding layer that reduces heat during grinding process. Product adapts to complex shapes and profiled parts with multiple contours and tight radii. It breaks down easily under hand or light mechanical pressures and works on most metals such as carbon and stainless steels, and high nickel alloys.

Schuyler Rubber Co., Inc.    Woodinville, WA 98072 6934
Aug 13, 2003 Rubber Bucket Blade Scraper uses adjustable-slide channel, allowing heavy-equipment operators to adjust position of bolts within channel to match existing bolt pattern on plow. Rubber sections, reinforced with tough plies of nylon and steel, are compressed onto 1¼ in. steel rod and secured every 12 in. using flatbar retaining plates. Adjustable heel pads help level scraper and extend life of front edge.

DataCard Corp.    Minnetonka, MN 55343
Aug 13, 2003 Available in English, French, German, Japanese, and Spanish, ID Works® v4.1 allows multi-national organizations to tailor ID and badging programs to meet regional needs. Software is suited for various identity applications such as corporate and government ID, membership, and customer loyalty programs.

Meggitt (Maryland), Inc.    Germantown, MD 20876
Aug 13, 2003 Smart IEEE P1451.4 TEDS sensors have embedded memory chip with standardized transducer electronic data sheets (TEDS) that store sensor information and parameters for self-identification and self-description. Sensors include serial digital links for accessing information for plug and play operation, as well as analog signals for backwards compatibility with traditional measurement systems.

AMETEK Test & Calibration Instruments    Largo, FL 33773
Aug 13, 2003 Model 4418Q integrates charge in pulse, and is optimum for direct connection to anode of photomultiplier tube. Model 4418V accommodates pulse-amplitude measurements on pulses from nuclear spectroscopy amplifier. Arrival times of events relative to common Start pulse can be digitized by Model 4418T. All three 12-bit ADCs feature 8 identical inputs with CAMAC and fast FERAbus readout.

Polymer Valley Chemicals, Inc.    Akron, OH 44313
Aug 13, 2003 Silane-Filler, Dry Liquid Concentrate Pre-Weighs can be produced using carbon blacks, silicas, or clays. They are packaged in low melt, batch inclusion bags and in weights from 1–60 lb. All grades of carbon black are available and mineral fillers can be treated or non-treated. While most pre-weighs are single filler formulations, co-blends can be produced.

Crossfield Products Corp.    Roselle Park, NJ 07204 1402
Aug 12, 2003 Dex-O-Tex Electro-Flor coating systems are offered in static dissipative or conductive range. Static dissipative range drains static charges from personnel and eliminates charge generation. Conductive range carries electrical charges to ground in potentially flammable or explosive areas, with electrical resistance of 25,000–1 million ohms. Both chemical-resistant epoxy systems consist of bondcoat and topcoat and can be applied in thicknesses from 7–12 mils.

Emerson Process Management, Intellution Division    St. Louis, MO 63136 8506
Aug 12, 2003 FloBossâ„¢ 103 Flow Manager includes solar panel assembly that adjusts 360° in azimuth and 90° in elevation to optimize solar exposure. Internal spread-spectrum radio operates in 900 MHz band and provides 2-way data communication to host computer or to another FloBoss. Pass-through communication permits several units to communicate to host through single radio. FloBoss 103 offers PID loop control, logic and sequencing control, and optional 4 channels of I/O.

Raytheon Commercial Infrared (RCI)    Dallas, TX 75266
Aug 12, 2003 Model 500DX combines radiometric thermal-imaging camera, handheld iPAQ PDA computer, and visible-light camera. Simultaneous split screen display allows users to see and document difference between component's appearance to naked eye and appearance when viewed with thermal imager. Unit includes 35 mm focal length lens and electronic zoom function that increases view up to 16x with iPAQ PDA. Camera is suited for detecting heat produced by engines, motors, or fluids.

E Instruments International LLC    Langhorne, PA 19047
Aug 12, 2003 IRtec Rayometric 6 non-contact, infrared temperature transmitter provides continuous monitoring with accuracy of ±2% of reading and optical resolution of 6:1. Utilizing Smart Microcontroller technology, IP65-rated unit offers temperature range up to 932°F with linear mV or TCs analog output. Emissivity, response time, and measuring range is configurable from PC. Report of calibration is provided.

NYLOK Corp.    Macomb, MI 48042 4007
Aug 12, 2003 Offered with NYTEMP® orange-colored patch, fastener maintains torque and clamp load stability in temperatures as high as 450°F. Suited for assembly applications in aerospace, automotive, appliances, and small engines, product meets torque and vibration requirements of MIL-STD-1312 #7. It requires no drilling or milling and is not affected by water, anti-freeze, gasoline, motor oil, diesel oil, kerosene-based materials, or hydraulic fluids.

Bettcher Industries, Inc.    Vermilion, OH 44089
Aug 12, 2003 Single-component, heat-curing EP17 is chemically resistant and bonds to substrates such as metals, glass, ceramics, vulcanized rubbers, and plastics. With operating range of -300 to 600°F, 100% reactive product contains no solvents or diluents and will not sag or drip on vertical surfaces. Product cures at temperatures from 300–350°F in 60–90 min and has tensile strength is 8,700 psi, Shore D hardness of 90+, and compressive strength of 13,000+ psi.

Revere Products    Cleveland, OH 44135 0311
Aug 12, 2003 Water-based EPOXI-COAT contains no flammable solvents, has no unpleasant odor, and is chemically resistant. Able to be applied without interrupting plant operations, product is ready for light foot traffic within 24 hr. It also works as protective topcoat or primer under other urethanes or epoxies. Available in Tile Red, Medium Gray, Dark Gray, or Tan, coating meets National V.O.C. Emission Standards and is USDA accepted.