Phoenix Contact    Harrisburg, PA 17111 0100
Mar 05, 2012 Available for 120/240 Vac applications, Quint UPS-IQ automatically detects input voltage and uses intelligent battery management to provide advanced diagnostics. UPS can start independent of AC input, allowing users to power up IPC or controller during blackout to simplify system diagnostics. Functionality lets users see data concerning power supply's voltage condition, UPS parameters, and battery health at any time.

BEI Kimco Magnetics    Vista, CA 92081
Mar 05, 2012 Suited for industrial scanning applications, DXH15-10-000A Outer Member Rotating BLDC Motor supports inner rotational speed variations by maintaining shaft run-out of ±0.010 in., resulting in jitter of less than ±0.1%. Precision ball bearings and balanced rotor ensure optimal operation at speeds in excess of 11,000 rpm under continuous duty over life of system. Measuring 1.5 in. OD and 1.0 in. in axial length, motor incorporates Hall commutation circuit that produces exacting switch points.

Dwyer Instruments, Inc.    Michigan City, IN 46361
Mar 05, 2012 Available in sizes from 1/8-2 in. NPT with orifices from 3-50 mm, Series SBSV is suited for air, gas, water, and other liquid applications. Brass-bodied Series SBSV-B has NBR seal with max process temperature of 176°F, while stainless steel bodied Series SBSV-S provides fluoroelastomer seal with max process temperature of 248°F. Featuring normally closed design, 110 Vac 2-way guide type valves are constructed with NEMA-13 rated enclosure for protection against ingress of foreign objects.

Baumer Ltd.    Southington, CT 06489 1534
Mar 05, 2012 Able to detect media levels in tanks, vessels, and pipes, LBFS level switch features sensitivity over measuring range for dielectric constants from 1.5 to 100+ that enables limit detection with all types of powders, granulates, and liquids. Response time of 0.2 sec promotes accelerated fill level detection as well as fill level accuracy and compliance. Featuring sensor head resistant to media adhesion, product is insensitive to flow, turbulence, bubbles or foaming, and suspended solids.

Walter USA, Inc.    Waukesha, WI 53188
Mar 05, 2012 Available for threads M3-M16, TMC Thread Milling Cutter is made of wear-resistant ultra-fine-grade carbide with multilayer TiCN coating. Tool features helix angle of 27° with shortened flute run-out and internal coolant supply from as low as thread size M4. Suitable for use on all materials up to hardness of 48 HRC, cutter is also available in uncoated version.

Hyde Industrial Blade Solutions    Southbridge, MA 01550
Mar 05, 2012 Ergonomically engineered for use by left- and right-handed workers, 6.5 in. long Hyde Loop Hoof Knife reduces stress, wear, and tear on wrists and fingers of farriers while effectively trimming frog and soles of hoofs. Blade utilizes .515 in. dia x 1.3 in. long, CNC-machine ground, high-carbon steel cutting edge that is sharpened on inside and mounted to HammerHead® molded handle. Latter features polypropylene core and thermoplastic elastomer soft grip covering to absorb shock.

Tiger-Vac Vacuum Cleaners    Dania, FL 33004
Mar 05, 2012 Featuring all stainless steel construction, Model CD-4 EX is certified for use in Class 1, Div 1, Group D and Class II, Div 2, Groups F and G. Unit is designed with static dissipating, washable Teflon®-coated main filter; maintenance-free side channel blower; manual filter shaker; and detachable filter and recovery tank assembly. For fine dusts, vacuum is available with Teflon®-coated manual reverse purge cartridge filter with minimum filtration efficiency of 99.95% on 0.5 microns.

MadgeTech    Warner, NH 03278
Mar 05, 2012 With input measurement range of ±3 A, Process101A-3A is suited for short- and long-term applications such as flow recording, solar cell studies, and battery consumption analysis. Unit features 4 Hz reading rate, pushbutton start option with multiple start/stop function, programmable high-low alarms, battery life indicator, and optional password protection. Using MadgeTech software, graphical, tabular, and summary data is provided for analysis and data can be viewed in A, mA, or µA.

VIA Technologies, Inc.    Taipei 231  Taiwan
Mar 05, 2012 VIA EPIA-M900 and VIA EPIA-M910 are mini-ITX boards with thermal design power (TDP) of 27.5 W. Processor features multi-core architecture that is natively 64-bit compatible and is designed for embedded applications including ATM, kiosks, POS, digital signage, and digital media applications. Both models are available with choice of 1.2 GHz QuadCore or 1.6 GHz dual core Nano X2 E-Series processors, and EPIA-M910 is available also with fanless 1.0 GHz Eden X2 dual core processor.

Emerson Process Management Dieterich Standard Inc.    Boulder, CO 80301
Mar 05, 2012 Requiring 52 in. between mounting flanges, Micro Motion® ELITE® High Capacity Coriolis meter supports flow rates up to 120,000 lb/min and density accuracies of ±0.0005 g/cm³. Depending on flow conditions and process fluid properties, meter can be mounted in any orientation. Product has no moving parts and operates from -400 to +392°F; optional high-temperature version extends to +662°F. Smart Meter Verification and 2-phase flow capability are also standard.

Berkeley Varitronics Systems    Metuchen, NJ 08840-1217
Mar 05, 2012 Containing multiple radios and multi-band antennae for several U.S. network carriers, Squid-PRO(TM) provides installers with real-time display of local 3G carriers' base stations and their respective signal strength or RSSI. This data provides enough information to make key installation site decisions as well as optimal antenna placement. Squid-PRO(TM) includes OLED display, USB port, and integrated GPS receiver for time-stamped and geo-located measurements.

Altus Positioning Systems    Torrance, CA 90501
Mar 05, 2012 Integrating Seismic Surveyor custom software from MicroSurvey, ikeGPS multi-sensor data acquisition system allows users to stake hundreds of points each day, and compute positions of target items. The ikeGPS combines GPS receiver, laser rangefinder, 3D compass, and digital camera in single handheld device, providing fully integrated solution for capturing geospatial data and 3D seismic volume during oil and gas exploration.

Sharp Electronics Corp.    Romeoville, IL 60446
Mar 05, 2012 Targeting digital signage players that do not have PC unit to display digital signage content, LR0G951 and LR0G952 modules integrate main circuit board, remote controller receiver board, and remote controller. Main board eliminates need for PC and has dedicated graphics engine that enables animation effects with full-HD still images displayed as motion images. Also, modules are equipped with functions that let user edit content displayed on digital sign using only remote controller.

STMicroelectronics    Lexington, MA 02421
Mar 05, 2012 Near Field Communications (NFC) controller, ST21NFCA, helps accelerate arrival of secure contactless apps and services accessible via Next-Gen smartphones. IC supports all NFC use cases and can coordinate multiple NFC secure apps stored in several secure locations, such as SWP-SIM and SWP-microSD Card or Embedded Secure Element. Corresponding NFC software stack, running on terminal host, supports all Google Android versions and will be available for MS Windows® 8 OS.

Fluke Networks    Camarillo, CA 93010
Mar 05, 2012 With Software Sensor Agent, AirMagnet Enterprise v10 enables organizations to turn any Windows PC into software-based WLAN sensor. Rogue detection and performance management capabilities ensure optimum levels of security, while management screen provides consolidated view of all data and controls to facilitate investigation and containment of rogue devices. With Automated Health Check capability, v10 also proactively monitors WLAN network health, from end-user device to cloud.

AW Company    Franksville, WI 53126
Mar 05, 2012 Comprising explosion-proof and non-explosion-proof models, RT-30 series has built-in 30-point linearizer, frequency output, 2 limit outputs (opto isolated), 9-24 Vdc power supply range, and backlit LCD. Software allows for selectable test functions, including frequency generator and programmable current outputs, while optional HART® communication protocol allows for monitoring and programming. Other options include 4-20 mA and frequency outputs and NEMA 4X enclosure.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Mar 05, 2012 With N5972A Interactive Functional Test software, users can emulate operating scenarios in lab and verify performance, without creating complex code or programming test equipment. Software provides equipment control, voice-calling, web browsing, file download/upload, and SMS/MMS features. In conjunction with E6966A IMS-SIP emulation software, program offers IMS-SIP messaging, video, and voice. IFT also supports battery profiling, providing insight into activities that are consuming power.

Clean Harbors Environmental Services, Inc.    Norwell, MA 02061
Mar 05, 2012 Emergency Response Package Rental Program provides mobile trailers or onsite containers that come preloaded with equipment and materials necessary to immediately contain and control releases in remote locations while outside responders are in route. Packages include containment, storage, recovery, and diversion equipment, including pumps, hoses, hand tools, PPE, and absorbent materials. With satellite tracking devices, Clean Harbors and site operators can monitor and locate units.

L-Com, Inc.    North Andover, MA 01845
Mar 02, 2012 Single stage AC/DC control line lightning and surge protectors products protect 8 individual single-ended AC or DC control lines using grounding lugs to provide tie points for earth ground. Weather-resistant models are available for 12, 24, and 48 Vac and 5 Vdc lines and feature removable screw terminal strips. AC protectors feature metal oxide varistors, while DC protectors feature uni-polar transient voltage suppression diodes rated at 1,500 W.

Phihong USA    Fremont, CA 94539
Mar 02, 2012 Suited for indoor/outdoor lighting applications, 50 W Model PDA050W-450G is equipped with 4 constant current outputs of 450 mA at nominal output voltage of 24.5 Vdc. With AC input range of 90-304 Vac, driver can be operated at standard North American mains voltages of 120 or 277 Vac for residential, commercial, and industrial applications. Water-resistant and fully potted with IP65 rating, driver has minimum average efficiency ratings from 82% at 120 Vac to over 84% at 277 Vac input.