IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Oct 17, 2003 Cluster Systems Management (CSM) v1.3.2 extends cluster management support to Linux on eserver pSeries®, helping to simplify tasks of installing, operating, and maintaining clusters of pSeries and xSeries® servers. It includes remote hardware control, utilities for administering software updates, cluster-wide resource monitoring tools, and automated triggers. Product also includes functionality of CSM v1.3.1 plus install scripts for administrators to set up customization during install.

IXYS Corp.    Santa Clara, CA 95054 2704
Oct 17, 2003 Able to source and sink 30 A of peak current, IXD_430 produces voltage rise and fall times of less than 30 ns. Internal cross conduction is eliminated through unit's source and sink output drive stages. With operating voltage range of up to 35 V, product has ability to disable output during fault conditions. IXDN430 is configured as non-inverting gate driver, IXDI430 is one inverting gate driver, and IXDS430 can be configured as non-inverting or inverting driver.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Oct 17, 2003 Parallel ESSL Engineering and Scientific Subroutine Library for AIX® 5L, v3.1 is tuned for POWER4â„¢ and POWER4+â„¢ processors and pSeries High Performance Switch. Scalable mathematical library supports 32-bit and 64-bit environment applications, and parallel processing applications on clusters of pSeries® servers. It provides over 100 subroutines in 6 areas of mathematical computations, which can be called from application programs written in FORTRAN, C, and C++.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Oct 17, 2003 LoadLeveler® for AIX® 5L schedules applications to clusters of IBM pSeries® servers and/or nodes. Job management program supports load balancing for interactive Parallel Operating Environment sessions. Software is supported on pSeries High Performance Switch, runs on AIX 5L for POWER v5.2 OS, and offers support for multi-adapter connection and dynamic configuration of adapters in Reliable Scalable Cluster Technology peer domain.

Tra-Con, Inc.    Bedford, MA 01730
Oct 16, 2003 TRA-BOND F253M two-part, low viscosity epoxy minimizes fiber pistoning and moisture absorption while maintaining long pot life and high temperature performance. Unmixed components are yellow and turn greenish blue upon mixing. With full cure, epoxy turns deep reddish-amber. Material develops strong bonds to fiber optic and optical materials that include most metals, ceramics, glass, and plastics.

Kin-Tek Laboratories    LaMarque, TX 77568 4202
Oct 16, 2003 Model 491M dynamically blends calibration standards for trace sulfur and oxygenated compounds in carbon dioxide. Secondary dilution feature gives adjustable low ppb and ppt concentrations over 400:1 range with constant output flow. Unit can generate gas mixtures from permeation tubes, diffusion tubes, and compressed gas cylinders. Mixture concentrations are traceable to NIST through physical standards. Interchangeable modules allow customization.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Oct 16, 2003 Pocket Pal-1, with automatic temperature compensation, is compact unit that is high water resistant and comes with its own storage case. Design allows samples to be poured out with ease and includes sample stage suited for measuring cuffing oils, organic solvents, and similar materials. Instrument can be cleaned under running water.

Oriental Motor U.S.A. Corp.    Torrance, CA 90502
Oct 16, 2003 Series BX high output power models are available with quiet GFH gearheads or in round shaft version. Standard speed control system provides speed ratio of 100:1 without reduction in torque over speed range of 30-3,000 rpm. Speed regulation relative to load and voltage variations is 0.05%. With up to 8 individual speed settings available, use of OPX-1A control module increases speed range to 3-3,000 rpm. Module displays position, speed, and torque data as well as alarm history.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Oct 16, 2003 The eserver pSeries® 615 rackmount Model 6C3 and deskside/desktop Model 6E3 offer optional 2-way 1.45 GHz POWER4+â„¢ processor with 8 MB of L3 cache. Express configurations include 2048 MB memory DIMM, two 36.4 GB hot-swap disk drives, one 4-pack disk drive enclosure, and AC power supply.

Magid Glove & Safety Mfg. Co.    Chicago, IL 60639
Oct 16, 2003 Economy style liner No. 800R is made of heat-resistant Sparkguard material, which is lined with red fleece. It is designed to provide maximum protection and warmth for head, neck, and ears. Designed to fit comfortably, product is available in navy blue.

Terahertz Technologies Inc.    Oriskany, NY 13424 4301
Oct 16, 2003 Model PdA-750 provides direct digital readout of current generated from photodiode, photomultiplier, or similar current source. Full-scale input ranges are ±20 nA to ±20 mA with noise level of less than 1 pA. Unit features variable bias supply, background cancellation, bi-directional RS-232 port, and rechargeable batteries. Large 4½ digit LCD provides max resolution of 1 part in 20,000, permitting detection of very small changes in signal.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Oct 16, 2003 pSeries® 670 and 690 servers for Capacity BackUp (CBU) offer 8-way Capacity Upgrade on Demand (CUoD) processor. CUoD processors remain in standby mode until needed. Features include 1.5 GHz POWER4+â„¢ processors for p670 and 1.3 GHz POWER4â„¢, 1.5 GHz POWER4+, and 1.7 GHz POWER4+ processors for p690. In case of disaster, processors can be temporarily activated. Each 8-way CUoD processor provides 240 processor-days of temporary On/Off Capacity on Demand.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Oct 16, 2003 The xSeries® 235 two-way, SMP-capable network servers use Intel Xeon processor with 1 MB L3 cache, 533 MHz front side bus, and 1 GB of 133/266 MHz DDR with ECC system memory. They include dual-channel Ultra 320 controller and integrated Gigabit Ethernet controller. Depending upon model, one or two 660 W power supplies are provided with hot-swap option. Servers come in 5U tower with 6 full-length PCI slots, 10 drive bays, and up to 1.3 TB hot-swap disk storage.

IBM (Corporate Headquarters)    Armonk, NY 10504-1783
Oct 16, 2003 With 7U form factor, BladeCenterâ„¢ 8677-2XX holds up to 14 BladeCenter HS20 blades with up to 28 processors. It is equipped with 1,800 W power modules and can hold up to 6 BladeCenter enclosures per 42 U rack. BladeCenter HS20 Blade Servers employ Intel Xeon processors with MicroBurst architecture and hyperthreading technology. They enable 2-way SMP processing with 533 MHz FSB, 1 GB DDR ECC SDRAM memory, and Dual Gb Ethernet connections with failover support.

Norma Products, Inc.    Wixom, MI 48393
Oct 16, 2003 Able to reduce permeation in automotive vapor lines by up to 80%, NORMAFLEX® LET 10 features 3-layer, polyester-based design. All materials are flourine-free. Product is thermoformed to customer's desired length and diameter. NORMAQUICK® 2K (2-shot) spigot can be incorporated into assembly instead of HDPE spigot when low permeation is important. Corrugated tubing is available for applications requiring routing flexibility.

E Instruments International LLC    Langhorne, PA 19047
Oct 16, 2003 Dual-channel MicroCal 2000+ comes with CalpMan Plus software for calibration and documenting in compliance with ISO 9000. Additional offerings include MicroCal PM200 Module to generate/measure pressure, programmable signal converter, remote temperature probe, and 4-Wire resistance thermometer. Able to measure 14 different thermocouples, unit offers calculated readings and has 2 internal sensors and built-in hand pump pressure module.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Oct 16, 2003 Utilizing synchronous rectifier based on PWM controller, TPS6102x family of synchronous, 1.5 A switch DC/DC boost converters provide up to 96% power conversion efficiency from input voltage range of 0.9–5.5 V. ICs can operate in down-mode with linear regulation if input voltage reaches or exceeds output voltage. Available in 10-pin, 3 x 3 mm QFN package, products have power save mode, 25 µA typical quiescent current, and over-temperature protection.

FCI/Burndy Products    Manchester, NH 03108
Oct 16, 2003 HYREDUCER and HYSPLICE Kits provide in-line reduction or splice of 2 conductors. They are pre-packaged with connector and length of heavy-duty black or clear heat shrink tubing that has passed Telcordia GR-347-CORE Abrasion and Cut Test. Inspection holes in connectors ensure conductor has been fully inserted. All connectors are UL listed.

VSK Photonics, Inc.    Lake Forest, CA 92630
Oct 16, 2003 Receiver Optical Sub-Assemblies optimize performance of 10 Gbps transceivers using electronic dispersion compensation. Multi-mode Model VSK10R07-06 incorporates photodetector with linear pre-amplifier for 1310 and 1550 nm systems. It features bandwidth of 8 GHz, sensitivity of -13 dBm, and dynamic range greater than 15 dB. Single-mode Model VSK10R09-06 operates at 1310 and 1550 nm and achieves sensitivity of -17 dBm, 19 dB dynamic range, and bandwidth of 8 GHz.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Oct 16, 2003 R'ANGLE self-clinching fasteners include self-tapping and steel threaded types that install permanently in metal sheets as thin as .040 mm. Self-tapping Type RAAª aluminum clinch fasteners require thread-forming screws and come in sizes No. 4-40, 6-32, 8-32, M3, or M4. Threaded Type RASª steel clinch fasteners come in No. 4-40, 6-32, and 8-32, M3, and M4 sizes; install in aluminum or steel sheets; and accept standard machine screws.