Compuware Corp.    Detroit, MI 48226
Dec 17, 2003 Compuware Vantage 9 Application Performance Management Software helps IT organizations identify and resolve problems before they impact business. It unites mangement-level views with end-to-end performance analysis capabilities. Summary views highlight performance by application and location, while detailed heat charts allow IT to identify service violations and application outages by time of day, day of week, and transactions affected.

Sipex Corp.    Miliptas, CA 95035-1701
Dec 17, 2003 Available in 10-pin MSOP package, Models SP6134 and SP6137 offer frequencies of 600 and 900 kHz, respectively, and include all provisions for loop stability and soft-start. PWM architecture drives dual NFET switches with efficiencies up to 94%. Controllers feature programmable output voltage down to 0.8 V and maintain 1.5% accuracy over wide range of line, load, and temperature conditions. Internal 2 A gate drivers provide load current capability to 15 A.

WAGO Corp.    Germantown, WI 53022
Dec 16, 2003 Series 787 Switch-Mode Power Supply offers single- and 3-phase versions with input voltages of 90-264 or 325-550 Vac, and output voltages of 12 or 24 Vdc. Current ratings include 1.3, 2, 2.5, 4, 8, 10, and 20 A. Output voltage is adjustable via potentiometer to compensate for voltage drop. Featuring shockproof, metal-clad housing, DIN-rail mount unit includes over-voltage, short-circuit, and surge protection. In-rush current limiting is provided via NTC resistor.

Keithley Instruments, Inc., Test Instrumentation Group    Cleveland, OH 44139 1891
Dec 16, 2003 Model 4200-SCS, with integral Keithley Test Environment-Interactive v5.0 software, runs stress-measure and reliability tests for device lifetime analysis and quality assurance. Running in Windows® NT or XP environments, KTEI v5.0 brings point-and-click simplicity to current-voltage measurements of devices such as transistors, resistors, and dielectrics, on up to 8 independent channels. It provides test definition, parameter analysis, graphing, and automation capabilities.

Jewell Instruments LLC    Manchester, NH 03103
Dec 16, 2003 Suited for outdoor use and harsh environments, LCF-2310 Series biaxial, fluid-damped, flexure-suspension servo inclinometer handles industrial, commercial, and aerospace sensing requirements. It has ±5.0 Vdc ±0.50% Full Range Output, -40 to +80°C operating temperature, and -60 to +90°C survival-temperature range. Able to withstand shock to 1500g, 1 msec, ½ sine, product is suited for antenna leveling and barge leveling and control.

Bustronic Corp.    Fremont, CA 94538
Dec 16, 2003 PICMG 2.16-compliant, 8-slot Compact Packet Switching Backplane incorporates connection for shelf managers specifically geared for High Availability applications. Pins for Intelligent Platform Management Bus are provided in 20-pin header. Backplane includes dual fabric slots for redundancy and 6/32 power studs that allow power interface boards to be hooked up for dual-redundant power supply swapping. One slot is convertible to system slot via CPU Enable resistor.

Zero-Max, Inc.    Plymouth, MN 55441 5509
Dec 16, 2003 Suited for systems requiring frequent washdowns, stainless steel ETP Express Shaft Locking Bushings require no maintenance, handle temperatures from –22 to +180°F, and have sealed, clean lines that resist debris collection. Corrosion-resistant products provide concentricity to .001 in. TIR and handle torque from 40–1,500 lb-ft. They are available in 5/8–2 in. and 15–50 mm shaft sizes. Applications include food, beverage, and dairy processing equipment

Sakor Technologies, Inc.    Okemos, MI 48864
Dec 16, 2003 DynoLABâ„¢ PT Dynamometer Test Cell Supervisory System includes combustion analysis package and DynoLAB Test Executive software v4.1, which provides support for high-speed wireless communications between test cell sensors and control console. DynoLAB system with Accudyne AC dynamometer recreates torsional transients generated by running engine. Powertrain components can be tested under real-world conditions, without engine and required test cell facilities.

Brady Corp.    Milwaukee, WI 53201 0571
Dec 16, 2003 BRADYGLOâ„¢ glow-in-the dark signage facilitates safe and orderly exit of people from passenger rail cars when power goes out by providing solution for clearly marking egress and access signs. Materials exceed APTA requirements for lighting pathways in complete darkness; are safe and non-toxic; and exceed all safety standards, including ASTM, OSHA, and NFPA.

Advanced Thermal Products, Inc.    St. Marys, PA 15857
Dec 16, 2003 Sens-A-Coil integrates fast-response thermistor element into plastic overmolded copper clip, designed to snap onto 3/8 in. return bends. Because sensor is housed in small bulb attached to copper clips, Sens-A-Coil maximizes sensing surface area, enabling sensing element to quickly react to changes in refrigerant temperature. Unit comes with 10 ft of AWG No. 22 PVC jacketed cable and is suited for HVAC diagnostic equipment and tools.

Rockwell Automation    Milwaukee, WI 53204
Dec 16, 2003 Allen-Bradley® Bulletin 855P Panel Mount Alarms and Bulletin 855B Round Industrial Beacons communicate machine status and emergency conditions. Rated 4/4X/13 and IP65, they can operate in wet, oily, dry, or corrosive environments. Alarms have sound outputs ranging from 80-105 dB at 1 m and can be mounted in 22.5 or 30 mm holes. Beacons come in 160 and 120 mm diameters with steady halogen, flashing halogen, strobe, and rotating halogen options.

B & B Electronics Mfg. Co.    Ottawa, IL 61350
Dec 16, 2003 Together with Buffered Smart Switch 232BSS4, Q4 Smart Switch software manages communication of 4 serial devices, including baud rates, handshake requirements, device names, and installation notes. It gives users total control of company-wide serial applications and eliminates need for custom programming of communication parameters. PC monitors and controls serial devices in one of 2 modes: Auto Select Mode and Smart Switch Mode.

PennEngineering® (Penn Engineering)    Danboro, PA 18916
Dec 16, 2003 PEM® access hardware, with MAThread® technology, employs anti-cross-thread design that corrects off-angle installations, aligns components, and slides through clogged internal threads. Design speeds assembly and eliminate failures, repairs, scrap, and downtime associated with thread damage. Hardware includes self-clinching, broaching, flare-in, floating, and surface-mount styles, in unified and metric thread sizes.

RBC Bearings (Corporate Office)    Fairfield, CT 06824
Dec 16, 2003 Extra-long, custom ball screws are available in several syles: hollow, with specialty plating and stainless materials, combined right- and left-hand thread, and with specialized drive methods such as splined journals, or gear-driven, rotating-nut designs. With available sizes in inch or metric, products can be supplied with internal or external ball returns, and special flanges and wipers are available.

Steril-Aire, Inc.    Burbank, CA 91504
Dec 16, 2003 Hand-held SterilWand(TM) uses UVC technology for decontamination of surfaces infested with mold, bacteria, or viruses. User passes device closely over contaminated surface area, allowing energy from 30 in. long UVC Emitter(TM) to decontaminate surfaces. Aluminum safety shield prevents direct exposure to UVC energy, while adding reflectance that increases light's effectiveness. Applications include residential, commercial, industrial, or institutional buildings.

Bettcher Industries, Inc.    Vermilion, OH 44089
Dec 16, 2003 Airshirz® Scissors help reduce muscle fatigue when cutting Kevlar®, carbon fiber, fiberglass, and other engineered composite materials. They feature 440 stainless steel blades and automatic spring-return action. Blade speed and position are fully controllable and can be stopped and opened at any time during cutting process. Safety latch secures blades in locked position for safety and to prevent damage. All units use standard 80–120 psi shop air.

Encoder Technology    Cottonwood, AZ 86326
Dec 16, 2003 Series S20 and S25 Extreme Duty Wash Down Optical Encoders are suited for food processing and packaging equipment applications where high-pressure steam or caustic chemicals are needed to meet regulatory requirements. Both series meet IP66/IP67 and NEM6 enclosure requirements and can be manufactured in solid Stainless Steel. They have labyrinth, double sealed housing design and resolution to 16,384 cycles (S20) and 32,768 cycles (S25).

Material Transfer & Storage, Inc.    Allegan, MI 49010 0218
Dec 16, 2003 Custom-engineered to accommodate specific application requirements, Modular MATERIAL MASTERâ„¢ incorporates Flo-Lockâ„¢ discharge spout closure system that allows material flow to be stopped during discharge. It also utilizes Flo-Masterâ„¢ bag massagers to promote material discharge and round, dust-tight Seal-Masterâ„¢ bag spout access chamber with gull wing doors to ensure operator access to bag spout tie off.

Shimadzu Scientific Instruments, Inc.    Columbia, MD 21046
Dec 16, 2003 Benchtop EZ Graph Tester provides high-speed testing of components produced from ceramics or highly rigid materials. High sampling speeds from 1.25–5.0 msec intervals enable accurate measurement of test force effects in elastic or break regions. Hand-held Smart Controller allows fine specimen positioning adjustments to be performed, and facilitates operation of crosshead and automatic extensometer.

Cal Test Electronics    Yorba Linda, CA 92887-4604
Dec 16, 2003 Model CT3133RA features 2 adjustment caps for low- and high-frequency compensation, replaceable gold plated tip, and snap-locking sprung hook that provides solid, positive connection. When BNC actuating pin makes contact with actuation pad, scope automatically detects x10 attenuation setting and adjusts scale readout accordingly. Unit meets IEC 61010-031 600V CATI, has 350 MHz bandwidth and 1.0 ns rise time, and offers 10–35 pF compensation range.