Intech Corp.    Closter, NJ 07624 1333
Mar 08, 2004 Non-hygroscopic Power-Core roller, with integral roller bearing, runs quietly and absorbs vibration and shock without placing undue wear on rail. Snap-in design ensures snug bearing fit, and composite material features integral elasticity that provides structural resistance to developing flats under static loads. Roller retains dimension and tight bearing fit in all weather conditions. Roller to shaft attachments are machined directly into metal hub.

Hyson Products, Associated Spring    Brecksville, OH 44141
Mar 08, 2004 Model T3-1500 is 2½ in. in diameter with contact force of 3,375 lb, while Model T3-9500 has 6 in. diameter and contact force of 21,400 lb. All T3 springs operate in both self-contained and hosed system mode. Units include safety guide, tapped holes for mounting, ISO square mounting groove for standard flange options, and hardened, corrosion-resistant rod finish. Oil retaining pipe is provided for lubrication in hosed system mode.

Permabond    Somerset, NJ 08873
Mar 08, 2004 Suited for appearance-sensitive applications, Permabond 940 non-blooming, low-odor adhesives bond plastics, rubber, and metal. Formulated alcoxy-ethyl cyanoacrylates do not result in white frosting on surface of components surrounding bond site. Single-component adhesives cure by reacting to trace amounts of moisture on surface of substrates being bonded.

Permabond    Somerset, NJ 08873
Mar 08, 2004 Permabond 915 methyl cyanoacrylate bonds metals, hard plastics, ceramics, and rubber to metal. Single-component adhesive cures by reacting to trace amounts of moisture on surface of substrates being bonded.

Permabond    Somerset, NJ 08873
Mar 08, 2004 PERMABOND® LH050 PURE Anaerobic Pipe Sealant fills up entire space between male and female metal components and instantly seals connection. Cured product typically exceeds burst rating of pipe and locks pipes, plugs, or fittings against vibration loosening. Single-component paste will seal even when direction in which pipe must face does not allow complete seating of threads. Disassembly of fittings for maintenance is still possible using normal tools.

Permabond    Somerset, NJ 08873
Mar 08, 2004 Permabond® 101 low-viscosity, ethyl cyanoacrylate adhesive has consistent cure speed and bond strength. Suited for use on plastics, rubbers, and metals, product has appropriate stabilization, which maximizes performance throughout shelf-life. It can be used to bond closely fitting parts and is suited for wicking or penetrating applications. Other applications include rubber bonding, jewelry assembly, speaker bonding, and fabric bonding.

Permabond    Somerset, NJ 08873
Mar 08, 2004 PERMABOND PURE Anaerobic Adhesive/Sealants are single component liquids that cure when in contact with metal parts and oxygen is excluded. They fill gaps between mated parts by curing to hard plastic and locking assembly in place. PERMABOND PURE Threadlocking Adhesives/Sealants cure to cross linked plastic with environmental and temperature resistance. Examples include medium-strength, medium-viscosity MM115 and very low viscosity ML186 threadlocker and sealant.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Mar 08, 2004 Model E5396A is 17-channel, single-ended connectorless soft-touch probe compatible with company's logic analyzers that use 40-pin connector interface. Model E5398A soft-touch probe is compatible with logic analyzers that use 90-pin connector interface. Spring-pin technology ensures reliable connection without need for special cleaning or surface finishes of probe pads. Probes suited for validation of high-speed digital designs.

Agilent Technologies, Inc.    Santa Clara, CA 95051
Mar 08, 2004 Model B4655A interacts with on-chip virtual probing technology, enabling logic analyzers to measure up to 64 internal FPGA signals for each debug pin. Engineers can select groups of internal signals to probe without requiring design recompiles. State and timing analysis modes allow designers to look at single circuits or correlate multiple circuits. Probe provides mapping of internal signal names from FPGA design tools to logic analyzer setup.

HellermannTyton    Milwaukee, WI 53224
Mar 08, 2004 Colored cable ties are manufactured in nylon 6/6 and can be made from specialty materials to meet application needs. Low insertion and pull through force reduces installer effort. Available in 20+ standard colors as well as custom colors, ties help meet aesthetic requirements and are suited for color-coding and identification purposes.

Stealth Computer Corporation    Woodbridge, Ontario L4L 8H2, CD   Canada
Mar 08, 2004 Housed in extruded aluminum enclosure, LPC-401X runs on 3.2 GHz Processor and has integrated Intel Extreme Graphics 2 Chip, which provides selectable 16 x 9 aspect ratios for TFT LCD and Plasma monitor applications. Features include on-board LAN, USB 2.0, Firewire, Audio in/out, and slim CD-ROM. With up to 200 GB drive space, system is compatible with Windows® 2000/XP and Linux and can be custom configured to meet exact needs of end user.

W.A.C. Lighting Company    Port Washington, NY 11050
Mar 08, 2004 Norfolk Series of architecturally styled lighting fixtures include pendants, which are offered in 2 styles with diameters from 14-48 in. They use either incandescent or compact fluorescent lamps. Matching sconces, ceiling mounts, and close-to-ceiling units are included in product line, which is available with glass or acrylic diffusers, as well as polished-brass or brushed-nickel metalwork.

EXAIR Corporation    Cincinnati, OH 45249-1621
Mar 08, 2004 Shockless Ion Air Gun neutralizes static electricity and cleans at distances up to 15 ft. High-velocity air jet uses small amount of compressed air to entrain 80% of total output airflow from surrounding room. Energized emitter at discharge end fills entire airstream with positive and negative ions capable of neutralizing high static charges in fraction of a second. Comfortable grip and hand position allows hours of continuous use without fatigue.

Brady Corp.    Milwaukee, WI 53201 2131
Mar 08, 2004 Wraptorâ„¢ Wire ID Printer Applicator prints and applies labels in 5 sec on average. The 300 dpi print head and durable thermal transfer print technology combine to create text, bar codes, and logos. Wraptorâ„¢ wraps wires, bundles, and square jackets from 0.060-0.600 in. dia. without tooling changes or mechanical adjustments. It is fully compatible with LabelMarkâ„¢ v3.0 labeling software, enabling import of graphic images and data from external sources.

Lock-N-Stitch International    Turlock, CA 95380
Mar 08, 2004 Based on Spiralhookâ„¢ thread geometry, Full-Torqueâ„¢ thread repair system restores strength and new threads simultaneously. Available in most inch and metric sizes, system increases strength of casting when bolt or stud is torqued into insert. It pulls up on insert, increasing load on Spiralhook threads and radial drawing force of threads. System contains crack and prevents future damage while maintaining full clamping load.

Precision Digital Corp.    Natick, MA 01760 2414
Mar 08, 2004 Precision Digital Panel Meter Enclosures, offered in plastic, NEMA 4 steel, and NEMA 4X stainless steel, house 1–6 m each. They are pre-punched with 1/8 DIN holes and most are available with hinged doors. Enclosures can be supplied with customized plastic engraved labels and stainless steel tags. They offer several mounting options and accept solid-state digital meters, which have 0.56 in. 4-digit red LED displays.

Bridgeport Magnetics    Bridgeport, CT 06608
Mar 08, 2004 Certified to UL, CSA, EN, and IEC standards with CE marking, CUSTARD (CUSTom/standARD) general-purpose transformers are based on power ratings from 20–1,000 VA. They incorporate standard primary windings for 117 V/230 V, 50–60 Hz operation and any secondary winding specified by end user. Applications include use as motor drives, step-down transformers, and power supplies. Models for medical applications are available.

Foxjet - An ITW Company    Saint Charles, MO 63304
Mar 08, 2004 ProSeries 768 prints to height of 4 in. without stitching. It uses Scantrue II ink for readable barcodes, text, and graphics and can be used to replace ingredients labels on variety of products. All printheads in series offer optional Automatic Priming System, which dispenses small amount of ink at regular preset intervals and then vacuums ink and debris off printhead.

NIBCO, Inc.    Elkhart, IN 46516 4714
Mar 08, 2004 In-line, longitudinal, Figure 4L braces against sway and seismic disturbances. Break-off head bolt verifies proper installation torque, and one-piece design allows swivel in only one direction. Carbon steel attachment has plain finish, with electro-galvanized or HDG finishes available. It features 2,015 lb horizontal design load and comes in sizes from 2½ through 8 in. IPS. Unit is UL and cUL listed.

Hurco Machine Tool Products    Indianapolis, IN 46268
Mar 08, 2004 Providing surface finishing and roughing operations, Model VTXV features stationary table capable of holding parts over 4,400 lb, and offers X, Y, Z travels of 31.5 x 27.5 x 20 in. Model VTXU, suited for machining multi-sided parts, allows 2-axis motion of trunion table to be separated from 3-axis motion in traveling column. For small batch processing, horizontal Model HTX500 features 500 mm pallets and is capable of 4th axis contouring using NC programming and indexing.