Nyden Corp.    San Jose, CA 95134
Apr 06, 2004 Two-phase NanoDriveâ„¢ SND100 allows engineers to deploy nano positioning steps with resolution selection dip-switch that provides up to 16 different resolution modes from 1/1 to 1/1000. Plug-and-play driver includes power LED, auto current down function, and auto current adjusting volume function for enabling different output currents to meet stepper motor requirements. Pulse Input switch allows user to select running driver as 1-pulse type or 2-pulse type.

Linear Technology Corp.    Milpitas, CA 95035
Apr 06, 2004 With input voltage range of 1.5-4.6 V, LTC3450 power converter is comprised of synchronous boost converter and 3 charge pumps in 3 x 3 x 0.75 mm QFN package. Synchronous rectification enables product to attain efficiencies above 90%, and controlled power-up sequence insures that AVDD output comes up first, followed by AGL and then AGH. In shutdown, all outputs are disconnected and actively discharged, eliminating chance of short-circuit faults.

Agathon Machine Tools, Inc.    Bethel, CT 06801
Apr 06, 2004 Precision linear guide elements operate with zero clearance between components, aiding alignment between moving parts. Guide elements, consisting of guide pins, bushings, and ball cages, operate under preload or slight interference condition. Guide pillar diameters are available from 3–63 mm. They offer short stroke, backlash-free operation for precision linear motion capability required in injection molds, CT scanners, and fluid metering devices.

Texas Instruments, Inc., Semiconductors    Dallas, TX 75243
Apr 06, 2004 Series OPA734 and OPA735 are 12 V amplifiers that use auto-zeroing techniques to provide 5 µV offset voltage and near zero drift. They feature 750 µA quiescent current, 200 pA bias current, 1.6 MHz bandwidth, and rail-to-rail output swing within 50 mV of rails. Series OPA734 includes shutdown mode, allowing device to be switched from normal operation to standby current that is less than 9 µA. Both series operate on single or bipolar supplies from 2.7–12 V.

Hyster Co.    Greenville, NC 27834
Apr 06, 2004 Powered by AC induction drive motor, J40-65Z series sit-down, counterbalanced, pneumatic tire lift truck expels no exhaust emissions. Series features 80 V electrical system, extended shift function, and in-dash display. Thermal system modifies functions and accommodates temperature increases while permitting continuous operation. MONOTROL pedal allows one-touch direction and speed control, and hydrostatic steer-on-command promotes maneuverability.

Raymond Corporation, The    Greene, NY 13778 0130
Apr 06, 2004 Available in weight capacities from 3,200–4,500 lb., Model 7400 Reach-Fork® truck comes in reach and Deep-Reach® configurations. Ergonomic features include universal stance, secondary control handle, and spring suspension and inertial dampener for operator compartment. Open view mast design provides view of base legs, load, and rack. Truck has A-frame suspension, display panel for real-time data, and optional heated control handle and floor cushion.

Eraser Company, Inc., The    Syracuse, NY 13221
Apr 06, 2004 Magnet Wire Stripping Pot strips film insulations from magnet wires of all sizes, types, and configurations. Wires are dipped into stripping solution that removes insulation without causing mechanical stress, material loss, or abrasion to wire. Model DSP1 has temperature control, while DSP2 has programmable temperature control for selecting and maintaining exact temperature. Both models are available in 115 V, 60 Hz or 220/240 V, 50/60 Hz.

Rittal Corporation    Springfield, OH 45504
Apr 06, 2004 Series TS8 enclosures incorporate 4-point latching system and are suited for control equipment, drives, 19 in. rack components, and PLCs. Units include side walls as well as mounting panels to attach internal components. Four sizes are available with heights ranging from 71–78 in., widths from 24–32 in., and depths of 24 in. Powder-coated Type 4 design meets UL standard 1332, and Type 4X is designed with Type 304 stainless steel for corrosion resistance.

Benko Products Inc.    Sheffield Village, OH 44054
Apr 06, 2004 Sahara Combination Drum Crusher/In-Drum Compactor is totally explosion-proof, making it suited for NFPA Class 1, Division 1 areas. Stainless steel unit features removable floor for forklift handling of heavy drums, and quick-change head for conversion to in-drum compacting mode.

Cuda Cleaning Systems, Inc.    Calumet, MI 49913
Apr 06, 2004 Single-stage, Mini-Max pass-through parts washer features 16 in. wide steel conveyor belt that carries parts through wash tunnel where they are blasted with hot water spray from 360° spray manifold. Conveyor belt, made of 1 x 1 in. flat wire mesh, can be adjusted to move at speed of up to 8 fpm. Water is heated by three 9 kW tubular heating elements to temperature up to 140°F. The 5 hp, vertical seal-less pump delivers cleaning power up to 110 gpm at 40–50 psi.

Miller Electric Mfg. Co.    Appleton, WI 54912 1079
Apr 06, 2004 Weighing 80 lb, XMT® 350 CC/CV inverter is designed for those who regularly perform Stick, TIG, pulsed TIG, MIG, pulsed MIG, flux cored, or air carbon arc cutting and gouging. It features Auto-Lineâ„¢ primary power management technology, 5–425 A output, and duty cycle rating of 60% @ 350 A/34 V. Product has single selector switch for process selection, adjustable dig and inductance control, Wind Tunnel Technologyâ„¢, and Fan-on-Demandâ„¢.

IKA Works, Inc.    Wilmington, NC 28405-7419
Apr 06, 2004 Master Plant™ consists of complete processing system for pharmaceutical and cosmetic applications, including vessel, piping, valves, controls, and 2 mixers. Integral spiral agitator and high-shear mixing unit, capable of handling viscosities from 1–100,000+ cps, combine to provide complete mixing, homogenization or dispersion, product transfer, and system cleaning. Available with capacities from 2.5–1,000 gal, system features scrapers and reversible operation.

Sloane, R. & G., Mfg. Co., Inc.    Little Rock, AR 72206
Apr 06, 2004 PVC and CPVC Expansion Joints suit applications where air or fluid can experience 30°F shift in temperature. Inner and outer telescoping tubes allow mounting between 2 fixed points. Inner tube expands and contracts against anchored outer tube to provide flexibility, while triple O-ring design enhances strength and rigidity. Operating ambient temperature range is from 60-90°F, and operating fluid temperature range is 50-80°F.

Upchurch Scientific, Inc.    Oak Harbor, WA 98277
Apr 06, 2004 Capillary Sample Trap Columns have stainless steel housing, allowing voltage into fluid path, as in electrospray applications. Suited for separating and concentrating and/or purifying biological samples, heart of assemblies is fused silica capillary column. Units are available unpacked or packed with reversed-phase C18, high-carbon load, 5 µm/300 Angstrom spherical silica, or Strong Cation Exchange 5 µm/85 Angstrom material.

.com Solutions Inc.    Fremont, CA 94538
Apr 06, 2004 FmPro Migrator v1.86 Enterprise Edition for MacOS X leverages FileMaker database engine features to provide automated FileMaker to FileMaker 7 database table consolidations. Database engine makes it possible to create FileMaker database tables with SQL commands. Software utilizes FileMaker 7 security model and automates migration of database structure and data.

Adaconn & Inserta Products, Inc.    Blue Bell, PA 19422
Apr 06, 2004 ADAFLANGEâ„¢ Adapters, suited for use in hydraulic component or system designs, require only 2 bolts. Available in 1/8–2 in. sizes, they mate with either of 2 diagonal tapped mounting holes of same nominal size SAE CODE 61 4-bolt flange port. Compact footprint permits adjacent ports to be nested together in close proximity. The 2-bolt flange mounting holes may be oriented 360° about central fluid flow axis.

ESI Group    Bloomfield Hills, MI 48304
Apr 06, 2004 PAM-CEM Solutions 2004 is computational electromagnetic simulation software for analyzing compatibility and interference problems. It includes CRIPTE, for induced phenomena on cable networks, and SYSMAGNA, for low-frequency analysis. Features include capabilities for antenna radiation simulation, modeling for on-board antennas and cable networks, and simulation of 3D radiated fields and induced effects on vehicle cable networks.

Flow-Tek    Houston, TX 77041
Apr 06, 2004 Media Containment Unit offers secondary seal in addition to primary stem sealing capacity. It provides environmental protection and plant safety, and can be monitored for early detection of stem leaks. Intended for automated and manual service, MCU features live-loaded stem sealing with belleville washers that automatically compensate for temperature and pressure fluctuations. Investment cast, stainless steel unit is corrosion-resistant and suited for harsh environments.

Weiler Corporation    Cresco, PA 18326 0149
Apr 06, 2004 Stellar Sweep Series provides users with Big Gripper Handle, which consists of clamp-style handle that requires no brace. Each sweep has 3 in. synthetic fill that is acid-, fungus-, and liquid-resistant. Black synthetic foam block will not warp, crack, rot, or house contaminating bacteria. Available in 18 and 24 in. sizes, series is offered in 4 styles for fine, medium, heavy-duty, and all-purpose sweeping.

Yamaha Robotics    Edgemont, PA 19028
Apr 06, 2004 With positional repeatability of ±5 µm, Phaserâ„¢ linear motor slides provide direct feedback of table position through 1 µm high-resolution proprietary magnetic linear scale. Compact products offer max acceleration of 3 Gs, max speed of 2,500 mm/sec, payloads to 20 kg, and stroke lengths to 2,000 mm. Features include stainless steel cover band, self-lubricating bearings on linear guide, and no-wear parts in drive section.