Leuze electronic, Inc.    New Hudson, MI 48165
Apr 09, 2004 Model DDLS 200 Ethernet is a contact-free, wear-resistant and protocol-independent Optical Data Transmission unit that transmits data over distances up to 300 m. It includes direct Ethernet connections for either 10 or 100 Mbits and supports all Ethernet protocols. With dimensions of 90 x 190 mm, Model DDLS 200 can be mounted in virtually any position while set-up and adjustments are made via single-handed adjustment system.

Smith Equipment    Watertown, SD 57201-5636
Apr 08, 2004 Dual Guardâ„¢ cutting, welding, and heating outfits are available in heavy-duty and medium-duty kits. Heavy wall, hammer style head minimizes heat warping and helps maintain positive seat with cutting tip. Flash arrestor module consists of stainless steel filter that absorbs heat energy away from flashback and prevents it from going farther into equipment. Reverse-flow check valves with replaceable filters stop debris from entering torch.

Advantech Automation Corp.    Cincinnati, OH 45240
Apr 08, 2004 High-speed, Model PCI-1714 streams continuous data from analog samples to host memory. Simultaneous sampling is provided on all 4 input channels through dedicated A/D converters. Trigger modes include software triggering, internal and external pacer triggering, post trigger acquisition, delay trigger acquisition, and pre-trigger acquisition. Card includes software for auto calibration, so no variable resistor trimming is necessary.

Selco Products Co.    Reno, NV 89521-5908
Apr 08, 2004 Microprocessor-based Model 2901 features max operating temperature of 158°F with 0-90% RH. Four-digit, .56 in. LCD displays temperature and time in low-light conditions. Available with temperature control only, or with time and temperature control, digital unit includes SSR drive output and 0.23 in. quick-connect input and output connections. Controller requires Type J thermocouple sensor and solid-state relay. Input voltage is factory-fixed or user-selectable.

DVT, Inc.    Norcross, GA 30093
Apr 08, 2004 With Framework 2.7 software, Intelligent Scanner XS performs over 100 data matrix reads/sec, and can read extensive list of barcodes including 7 RSS codes, USS 128 Composite, UPC/EAN Composite, Planet Code, Micro PDF, and PDF truncated. Software includes Data Matrix reader utilizing grayscale processing, which can read severely degraded codes printed with laser, ink-jet, or dot-peen marking technologies.

Humphrey Products    Kalamazoo, MI 49003
Apr 08, 2004 Comprised of multipurpose, 3-way valves with direct-acting solenoids, 300 Series includes models that measure 19–25 mm wide and have Cv values from 0.14–1.0. Short-stroke balanced poppet design requires no lubrication and tolerates impurities in air system, ensuring positive scaling. Valves of same series, mounted in-line or on subbase, can be oriented for NO or NC as diverter or selector. Options include mounting styles, voltages, and surge suppression.

Humphrey Products    Kalamazoo, MI 49003
Apr 08, 2004 Available in single air pilot configuration with air/return spring as well as double air pilot configuration, TAC³ valves are 4-way, 5-port, 2-position valves with common inlet and separate exhaust ports. They are also available with single pushbutton, double pushbutton, and one pushbutton/one air pilot port. With Delrin sleeve construction, products handle pressures from 0–125 psig and temperatures from -20 to +180°F, and operate at speeds to 600 cpm.

Humphrey Products    Kalamazoo, MI 49003
Apr 08, 2004 Mounted as single unit or single unit with base piping, HEA/HEB Series delivers 0.07 Cv flow rate and has response time down to 6 ms. HEA Series comes in 2-, 3-, and 5-port configurations, while HEB Series comes in 2- and 3-port configurations. Both series, offered in 0.55 W or 0.15 W versions, are available as NO or NC with single and double solenoids. Port sizes include M3, 10-32 UNF, and 1/8 in. NPT. All valves are pressure rated for 29–102 psig.

Lee Industries, Inc.    Philipsburg, PA 16866
Apr 08, 2004 Inclined Agitator helps evenly cook high-viscous products and ground meats, eliminating dead spot often found in center of kettle. Slow blender speeds can be used to accommodate gentle products while still mixing thoroughly. Heavy-duty drive can be designed for 2,000,000 cps, and 4 in. flush-bottom ball valve allows for discharge of most products.

Densitron Corp.    Santa Fe Springs, CA 90670
Apr 08, 2004 Clear Screen Heaters are suited for LCDs that need fast response time at temperatures down to -40°C. Made from thin polyester with ITO coating, screen is 0.3 mm thick and suited to 5-12 V operation. Heaters are fitted between glass and backlight with adhesive strip. Interconnect leads can be customized for any size or shape. Maximum screen size is 6 in.

Meriam Instrument    Cleveland, OH 44102
Apr 08, 2004 Available with 0.10% accurate pressure measurement, 3900 Series MERIGAUGE™ can be battery or externally powered and rack- or pipe-mounted. Externally powered versions can be equipped with relays and 4–20 MA output. NEMA 4 stainless steel enclosure and isolated sensor are standard on all units. Product can be used for critical process applications or as battery-powered test gauge.

Ringfeder Power Transmission USA Corporation    Westwood, NJ 07675
Apr 08, 2004 Bidirectional Type BD torque limiters protect rotating machines and components from damage in case of jam/overload. Adjustable overload settings cause unit to disengage mechanically when overload occurs and trip a limit switch or signaling device. BDR units have automatic random reset, while BDS units offer automatic single position reset and use rollers instead of balls. Random reset or single position units are available in sizes from 44-35,000 lb-in.

Tra-Con, Inc.    Bedford, MA 01730
Apr 08, 2004 Moisture-resistant TRA-BOND 789-3T3N1 is suited for side mount staking of components and any application were resistance to wicking and flow is critical. Product exhibits electrical resistance and has viscosity of over 200,000 cps. Thermal expansion coefficient ensures bonding to substrates, and product works on hard-to-bond substrates such as nickel, gold, and copper.

Eidos Corp.    Lincoln, NE 68529
Apr 08, 2004 Used on hard surface floors, SitStand consists of movable seat that adjusts from flat to 45° and swivels up to 180° off center. Ergonomic design with contoured padded seat reduces fatigue and lessens chance of back strain. Equipped with rear casters, product weighs 37 lb and employs gas spring actuated seat that adjusts in height from 24–36 in. Seat base at front is 21 in. wide, allowing worker to fit into narrow spaces to reach work surface.

Mid-West Instrument    Sterling Heights, MI 48314
Apr 08, 2004 Offered with 2½, 3½, or 4½ in. dials, Model 123 is available with aluminum or 316/316L stainless steel bodies, 316 SS springs and internal parts, and various elastomers. It is fully over-range protected in either direction up to max rated safe working pressure of 5,000 psi. Hermetically sealed SPST or SPDT magnetically actuated reed switches are available as options to provide high/low alarm control.

Viking Industries L.L.C.    Lake Forest, IL 60045
Apr 08, 2004 Able to attach to any type of air tool, Air Lightâ„¢ uses same compressed air as tool to provide light that can be adjusted for additional illumination anywhere on work surface. Product also operates independently of air tool for increased operator safety and performance.

E Instruments International LLC    Langhorne, PA 19047
Apr 08, 2004 Pressure documenting MicroCal P20 allows calibration and testing of pressure process instrumentation. It features up to 2 internal pressure sensors, external pressure modules, and graphic, backlit display. Instrument is capable of MV, V, and mA (active and passive loop) measuring and simulating for TRX calibration. It is also capable of measuring temperature with RTD for flow transmitters. Other features include HART and RS232 capabilities and real-time clock with memory.

SAIA-Burgess USA Inc.    Vernon Hills, IL 60061
Apr 08, 2004 Offered as alternative to high-torque linear actuators, UKE Series motors provide 250 N force and IP40 protection and are rated for thermal class A according to IEC 85. They operate in ambient temperatures from -15 to +60ºC and can be mounted in any position. Motors provide 0.031 mm linear travel per step, max linear travel to 30 mm, and a max static force to 500 N. They can be stopped when voltage is applied without concern of overheating.

360Training    Austin, TX 78704
Apr 08, 2004 OSHACampus delivers online safety training, certification, and learning management for occupational health and safety industry. Safety training helps employers implement preventative measures to avoid fines, and minimize on-the-job injuries and fatalities. Offered in basic and advanced levels, courses address Fire Prevention, Bloodborne Pathogens, Hazardous Communications, HAWOPER, and Forklift safety. OSHACampus also offers online instructor certification courses.

Data Display Products    El Segundo, CA 90245 4630
Apr 08, 2004 Suited for stack lights and signal towers, Series SL2 Lamps replace incandescent bulbs. Available in red, yellow, green, blue, and white, lamps provide indication of machine status from anywhere on factory or office floor. Small 15 mm diameter fresnel lens and selection of base styles allows installation in 30, 50, and 70 mm stack lights. Offered in 12 Vac/dc, 24 Vac/dc and 120 Vac, lamp circuit is immune to false indication caused by leakage current.