Sakor Technologies, Inc.    Okemos, MI 48864
Apr 20, 2004 DynoLABâ„¢ PT v4.1 offers Ethernet support, providing bandwidth for data acquisition and enabling high level of remote monitoring. Wireless Ethernet offers potential to eliminate all physical connections between test cell devices and control room. Test system employs DynoLAB Test Executiveâ„¢ software based on National Instrument's LabVIEW architecture. It supports gas analyzers, function generators, oscilloscopes, and electric motor drivers.

Penmar Automation Inc.    Newmarket, ON L3Y 7V1
Apr 20, 2004 Command Stamp improves safety of metal stamping operations in compliance with CSA Safety Standard Z142-02 by tying together all safety guards and monitoring devices on Power Presses. It provides diverse redundancy in order to verify and maintain safe operations. Able to be used as upgrade for older presses, it is available with or without installation and has CSA approval.

Malvern Instruments Inc.    Westborough, MA 01581
Apr 20, 2004 Inserted directly into process line, Particle Probes provide real-time measurement of particle size and velocity. Standard Model IPP 50 is for larger particles and granulates, where process concentration is low and no dilution is needed. Model IPP 50-SE uses air for concentrated systems and for materials that are adherent and require dispersion. Intrinsically safe Model IPP 50-Se features low power input and is used in hazardous conditions.

Bacou-Dalloz    North Smithfield, RI 02917
Apr 20, 2004 Falconâ„¢ Self-Retracting Lifeline is available in 20, 30, 50, and 65 ft models with galvanized wire and stainless steel wire rope. Features include corrosion-resistant, stainless steel and aluminum internal components; side payout design; and smooth, quiet operation. Spring retraction tension is designed not to pull or drag on worker, and dual swivels prevent lifeline from twisting during use.

C-Tech Industries    Camas, WA 98607
Apr 20, 2004 Featuring 40 in. high wash cabinet and 28 in. wide rotating turntable, front-load Cuda 2840 uses 3 hp, vertical sealless pump for 50 gpm/45 psi cleaning power. Roll-in, no-drip door facilitates loading and unloading. With load capacity of 750 lb, washer offers automatic low-water shutoff, sloped tank, 12 in. SS disc oil skimmer, and removable 20-mesh debris screen that prevents loose parts and heavy particles from entering wash solution.

Ergonomic Handling Systems    Skippack, PA 19474
Apr 20, 2004 Telescoping Bridge is suited for situations that require a few more feet off to side of bridge crane to reach material, but where obstructions along working area will not allow for longer bridge. Instead of man-handling loads into place that standard bridge can't reach, user can extend telescoping bridge to reach material.

Elma Electronic Inc.    Fremont, CA 94538
Apr 20, 2004 CompactPCI Filler Panels ensure accurate lateral alignment and vertical orientation, while providing EMC protection for unused slots. Alignment pins ensure that panels stay in place and do not displace cards into last slot. They also maintain accurate parallel orientation with respect to adjacent cards, preventing cards from leaning, which would expose slight gaps in front of chassis, allowing radiated emissions through openings.

Advance Transformer Co.    Rosemont, IL 60018 5625
Apr 20, 2004 Mark 10 Powerline electronic dimming ballasts take dimming signals directly from power line, delivering 100%–5% continuous dimming capability. Encased in 9.50 x 1.70 x 1.18 in. housings, models for 1- and 2-lamp long twin tube fluorescent lamp applications feature dedicated voltage of 120/277 V, 60 Hz and can control 36 and 39 W long twin tube lamps in addition to 40 W lamps. All models are compatible with controls offered by various manufacturers.

Iveco Trucks Of North America, Inc.    Bensalem, PA 19020
Apr 20, 2004 NEF Power Units provide ready-to-use packages with base engine, cooling package, and air filter specified for stationary or mobile applications. Optional components include puller or pusher fans, balancers, air and fuel heaters, and engine mounts. Naturally aspirated, turbocharged, and charge-air cooled versions are rated from 80–227 hp and fitted with mechanical and electronic fuel injection systems, electronic control, and rear gear drive design.

Mueller Optics    Johannesburg, MI 49751
Apr 20, 2004 Eraticator 8.5–25x50AO Scope features reticle design with micro-fine cross hair and illuminated 1/16 mm red dot. When illuminated, dot has 11 different brightness intensity settings for accurate shot placement. Dot is black when not illuminated, providing continuous aim point. Scope includes fast focus eyepiece, finger target style turrets with click stops, and fine tune 1/8 moa adjustments. With black matte finish, unit is waterproof and fogproof.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 20, 2004 Piezoelectric force sensors measure dynamic force in compression, tension, and impact modes. They possess necessary response and endurance to follow fast-rising, short-duration force events such as crimping, stamping, punching, forming, and drop and impact testing. Force sensor types include ring, 3-component ring, link, impact, penetration, and strain styles. ICP® and charge output versions are available; signal conditioning is also offered.

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 20, 2004 Rack mountable TEDS (Transducer Electronic Data Sheet) multi-channel and dual-mode signal conditioners are available for use with ICP® and charge output vibration, pressure, and force sensors. In-Line Charge Converters are available with TEDS capabilities, which enable the devices to store and recall TEDS data for attached sensor. In-Line TEDS Adaptor features interface chip that allows information relative to attached sensor to be stored.

Larson Davis Inc.    Provo, UT 84601
Apr 20, 2004 Featuring 7-pin LEMO connector, ½ in. Model PRM905 can be used with both prepolarized and externally polarized microphones. It is characterized by wide frequency range and low noise floor. Low output impedance and high output current permit it to drive very long microphone extension cables. Unit is suited for acoustic engineers using analyzers which support Smart Transducer Interface IEEE P1451.4 with TEDS (Transducer Electronic Data Sheet).

PCB Piezotronics Inc.    Depew, NY 14043 2495
Apr 20, 2004 Hand-held Model 915A01 provides field or laboratory calibration of piezoelectric acoustic pressure sensors. Self-contained, battery-powered unit generates stable sound pressure level reference of 134 dB at 250 Hz. Included barometric pressure gauge provides ambient, atmospheric pressure correction factor. Kit includes batteries, accessories, and adaptors for calibrating Series 103, 106, and 116 piezoelectric pressure sensors.

Electro Optical Components    Santa Rosa, CA 95403
Apr 20, 2004 Series HVA Amplifier Modules feature gain ranges from 20–60 dB and low input noise of 0.9 nV/SQR(Hz) minimum. Four models in series have 2 gain settings. Small size of EMI shielded package allows use close to signal source, eliminating noise pick-up from long signal cables. Amplifiers are available with 50 ohm bipolar input for low impedance sources or 1 M ohm FET input for high impedance sources. Offset can be adjusted with integrated trimpot.

Dialog Corp., The, A Thomson Co.    Cary, NC 27511
Apr 20, 2004 Dialog Profound® includes continuously updated collection of more than 200,000 market research reports contributed by 130 top research firms. It is accessed through intuitive tabular interface that helps occasional users find relevant information quickly. Users can purchase sections of marketing research reports individually, rather than paying for entire report. Dialog Profound also offers access to approximately 8,000 global news sources.

Airfloat Systems    Decatur, IL 62526
Apr 20, 2004 Carts, interfaced with turntables and pneumatic lift tables create Fork-Free ergonomic material handling equipment. Products such as 2-position turntables and lift tables help optimize worker productivity. Equipment is suited for transporting and positioning product.

Scapa North America    Windsor, CT 06095
Apr 20, 2004 Bioflex® Rx477U is an electrically conductive adhesive transfer film used to fabricate gaskets used on medical diagnostic equipment. It features conductive, 2 mil-thick, modified acrylic adhesive that adheres to substrates such as metals, painted surfaces, and plastic films. Transfer film also exhibits chemical-resistance.

Preferred Rubber Compounding Corp.    Barberton, OH 44203
Apr 20, 2004 Classified by Underwriters' Laboratories to National Sanitation Foundation Standard 61, EPDM Compounds will not leach out when used in manufacture of seals and gaskets for pipes and other conveyors of water.

Opto 22    Temecula, CA 92590 3614
Apr 20, 2004 Nvio integrates hardware, communications, application configuration, provisioning, and billing into turnkey, web-based system. Combining all required elements for machine-to-machine (M2M) applications into one offering, it provides deployed method to monitor, message, control, and acquire operational data from extended enterprise. Nvio Starter Kit uses embedded wireless WAN technology to communicate M2M data over GSM/GPRS cellular networks.