Latest New Product News - ThomasNet News

Chemicals & Chemical Processing, Fluid & Gas Flow Equipment

Focus on Microfiltration Part 2: Filter Longevity and Filter Selection

May 22, 2017

Last month, we described the considerations associated with predicting filter service life and how total throughput can be estimated through experimentation. In this second installment, we will examine four filter selection strategies for maximizing service life in continuous-use applications. These aspects consider chemical compatibility, temperature, binding characteristics, and pore... Read More

Thermal & Heating Equipment

Ceramic Curing Furnace Used Specifically for Curing Electronic Components and Military Armor

May 22, 2017

L&L Special Furnace Co., Inc. has delivered a second car bottom furnace used for curing complex ceramic composites, silicon carbide plates and military-grade armaments. The cycles require extremely slow heat-up and cooldown curves, which are critical for the end product.

The curing process is achieved by heating the parts very slowly to drive off moisture without affecting the part... Read More

Material Handling & Storage

Bulk Liquid Storage Solutions for the Paper Making Industry - Avoid Contamination of Latex & Other Specialty Coatings

May 22, 2017

Aero Tec Laboratories Inc. (ATL), of Ramsey, NJ, the world leader in flexible containment technology since 1970, offers its bulk liquid storage solutions to the paper manufacturing industry. ATL's rugged, fully collapsible mil-spec fabric tanks are often used to store sensitive substances, such as latex, that are used in the paper production process.

ATL's flexible rubberized... Read More

Mechanical Power Transmission

Custom Sinochron® Synchronous Motors and Drives Can Operate Without an Encoder

May 22, 2017

The SINOCHRON® Motor design offers advantages in continuous duty applications. The efficiency is also better in partially loaded duty cycles, when compared to standard asynchronous motors. Drive units are virtually loss-free in no-load operation. This motor design offers advantages in powering conveying equipment; escalators, spooling machines, compressors and traction drive units amongst... Read More

Electronic Components & Devices

Carrier-Telecom E1/T1 Baluns and Panels

May 22, 2017

Balance your data processing signals passively!

The ETS CT-710, 720, 730, 740 Series of baluns and panel enables G.703 equipment to use and operate over UTP cable. The E1/T1 baluns and panels convert the unbalanced G.703 signal 75 ohm coax from the router to a well balanced 120 ohm for E1 (100 ohm for T1) signal for low loss transport.

All ETS E1/T1 Baluns and Panels are passive... Read More

Machinery & Machining Tools, Optics & Photonics

90-Line-D Alignment Accessory comes with precision penta-prism.

May 22, 2017

Housed in aluminum package, 90-Line-D Alignment Accessory features adjustable knobs for locking laser beam position and fine angular control. Used for aligning and checking planer squareness and parallelism on assemblies, machinery and equipment, unit comes with anodized protective coating. Equipped with rotatable nosepiece, product comes with alignment detector.

Read More

Sensors Monitors & Transducers, Test & Measuring Instruments

KU-3 Krebs Unit Viscometer comes with touch pad control interface.

May 22, 2017

Featuring magnetic spindle coupling for rapid attachment and release of KU spindles, KU-3 Krebs Unit Viscometer provides measurement range of 40 to 141 KU, 32 to 1099 gm, and 27 to 5274 cP with ±1% accuracy. Meeting RoHS and ASTM D562 standards, unit is used for measuring viscosity of paints and coatings. Viscometer provides continuous sensing and displays in Krebs units, grams or... Read More

Material Handling & Storage, Mechanical Power Transmission

LMS-180 Linear Stage features linear encoder with sine/cosine output.

May 22, 2017

Available with travel ranges from 6 to 20 in., LMS-180 Linear Stage offers smooth motion with 15 nm resolution and repeatability down to 0.05 microns. Unit delivers 500 mm/sec maximum velocity when driven with SMC Hydra closed-loop motion controller. Equipped with ironless electromagnetic linear motor, unit’s recirculating ball bearings provide 250N load capacity. Product also comes with... Read More

Chemicals & Chemical Processing

CP-3002 Compactors meet ANSI and OSHA standards.

May 22, 2017

Featuring top opening of 52 in. x 58 in. and capacity of 3 cu-yds, CP-3002 Compactor with dual cylinder design provides cycle time of 52/89 sec. Offering volume displacement of 140/100 cu-yds/hr, compactor delivers force of 101,800/138,500 lb. Unit is suitable for retail outlets, transfer stations and warehouses applications.

Read More

Machinery & Machining Tools

800-PB-VF- 36 Splicer comes with web break detector.

May 22, 2017

Allowing non-stop production for rolls up to 36 in. diameter and weighing up to 900 lb, 800-PB-VF- 36 Semi-Automatic Splicer features turret design for easy roll lifting directly from floor. Designed with splice table pivots, PLC control and tape dispenser, unit’s splice prep signal tells operator when to load new roll. Using festoon feedback to pneumatic braking system, product offers... Read More

Fluid & Gas Flow Equipment

ETX Scraper Seals feature low coefficient of friction.

May 22, 2017

Suitable for pharmaceutical, medical, food and dairy processing applications, ETX Scraper Seals are machined from Ertalyte® PET-P.0020. Available for closed linear bearings and closed pillow and flange blocks, scraper seals keep bearings free from debris and bacterial contamination. Having continuous service temperature up to 210°F, units are designed with slight interface between shaft and... Read More

Machinery & Machining Tools

Force X Solid Carbide Drill comes with continuously thinned web design.

May 22, 2017

Suitable for stainless steel, alloy steels, cast iron and non-ferrous materials, Force X Solid Carbide Drill comes with titanium aluminum nitride coating. Edge preparation, corner design and 140° split point geometry features are available on 3 x D R457, R458 and 5 x D R453 and R454 models. Offering solid and coolant feed options, unit with micrograin carbide substrate increases wear... Read More

Electrical Equipment & Systems

Architura LED Lights feature polycarbonate lensing.

May 22, 2017

Available in RGB and RGBW models with outputs 10 and 15 Watts output per ft, Architura LED Lights are used in entertainment and themed venues, shopping malls, sports facilities, theatrical playhouses. Offering push-fit screw-less wire-thru interconnection, adjustable sliding brackets and wire-through cast swivels mounting options, units measure 2.75 high x 3 in. wide. With 50,000-hour life,... Read More

Electrical Equipment & Systems

STRADA LED Pendant offers lamp life of 50,000 hours.

May 22, 2017

Available in four lengths from 4-ft up to 9-ft with 16- to 38-watts respectively, STRADA LED Pendant delivers color indexing of greater than 80 CRI. Able to produce 140 lumens per watt, unit is suitable for offices, libraries, retail, laboratories, common areas and supermarkets. Made of aluminum body and end caps with matte acrylic lens, product comes with LED driver that allows 120-277 V... Read More

Electronic Components & Devices

Power Management Integrated Circuit features 62μA quiescent current.

May 22, 2017

Available in ISL91211A and ISL91211B models with triple (2+1+1 phase) and quad (1+1+1+1 phase) outputs, ISL91211 Power Management Integrated Circuit is suitable for smartphones, tablet computers, SSDs and networking devices. Embedded with synchronous buck converters that delivers up to 5A output current per phase. I²C and SPI programmable output from 0.3 to 2 V, unit’s automatic diode... Read More

Electrical Equipment & Systems

P-Series AC Power Sources deliver 45-500 output frequency.

May 22, 2017

Enabled with faster communication speed and programming the power supply remotely, P1352, P2002 and PF1352 P-Series AC Power Source models feature Option U that consists of USB, Ethernet and RS-232 Interface. P1352, P2002 and PF1352 models come in 3.5 H x 17.5 in. D, 5.25 H x 17.5 in. D and 3.5 H x 21 in. D sizes respectively. Having fully adjustable voltage and frequency, PF1352 model can be... Read More

Material Handling & Storage

Mobile Flexible Screw Conveyor comes with removable lower clean-out cap.

May 22, 2017

Featuring rugged flexible screw designed for difficult-to-move products, BEV-CON™ Mobile Flexible Screw Conveyor with round vibratory screener removes oversized particles. Designed with smooth polymer conveyor tube and all material contact surfaces with stainless steel finishing, unit can be rolled into position, locked in place with jacking footpads.

Read More

Test & Measuring Instruments

Acrylic Sepa Test Cell comes with polypropylene and PTFE spacer options.

May 22, 2017

Available in 34 mil and 75 mil channels depths, Acrylic Sepa Test Cell is used for investigating hydrodynamic conditions inside the cell or for observing local fouling at membrane surface. To avoid usage of stainless-steel shims and spacers, channel depth of 34 mil was selected as common spacer thicknesses in spiral-wound elements ranging from 31-34 mil.

Read More

Entegris to Participate in Stifel Technology Conference in June 2017

May 22, 2017

BILLERICA, Mass., May 18, 2017 - Entegris, Inc. (NasdaqGS: ENTG), a leader in specialty chemicals and advanced materials solutions for the microelectronics industry, is scheduled to participate in the Stifel Technology, Internet & Media Conference on Monday, June 5, 2017 at the Fairmont Hotel in San Francisco, CA.

For more information, see Entegris' website at Read More

Radiant Hosts Free, Half-Day Seminars on Light & Color Measurement

May 22, 2017

REDMOND, Wash. - May 18, 2017 - Radiant Vision Systems, a leading provider of visual test and inspection systems for lighting and display devices, announces that it will host a series of live, half-day seminars presenting technical concepts and solutions for "Light & Color Measurement." Seminars are led by Radiant's team of light and color measurement experts, and include live... Read More