Kimberly-Clark Professional
Roswell, GA 30076
Oct 27, 2009 Made from breathable SMS (spunbond-meltblown-spunbond) material that delivers cloth-like comfort, rip-resistant Kimtech Pure A5 (non-sterile) Coveralls are available in sizes small through 4XL. Elastic waist and back reduce loose-fitting material that could contact work surfaces or billow out, while built-in thumb loops keep sleeves from rolling back and exposing wearer. Mandarin collar comes up high on neck for additional protection. Hood and boot covers are also available.

New Brunswick Scientific Co., Inc.
Edison, NJ 08818
Oct 21, 2009 CelliGen(TM) BLU benchtop cell culture bioreactor has scalable, stirred-tank design and features compact control station with integrated pumps and color touchscreen interface. System includes lightweight, pre-sterilized, pre-validated, single-use vessels in 5.0 and 14.0 L total volume capacities. All components are manufactured with USP Class VI materials and have been tested for leachables and extractables, making them suitable for FDA-approved applications.

Momentive Performance Materials
Strongsville, OH 44149
Oct 12, 2009 Available in high consistency rubber and liquid silicone rubber, silver-based StatSil Elastomers offer built-in antimicrobial protection making them suited for medical, pharmaceutical, cosmetics, and food industries. Products offer resistance to chemicals, provide biocompatibility, are virtually odorless, and are available with many international recognized approvals such as USP Class VI, ISO 10993, BfR and FDA.

Epigentek Group Inc.
Brooklyn, NY 11226
Oct 07, 2009 SuperSense(TM) Methylated DNA Quantification Kit fluorometrically measures global DNA methylation shifts, overcoming limitations such as need for special equipment, long protocols, low sensitivity, and radioactivity. Assay can be completed in 3 steps within 2.5 hr via 96-well plate format. With detection limit as low as 50 pg of methylated DNA, kit is suitable for quantifying methylated DNA using minimal DNA sample quantities.

Thermo Fisher Scientific
Waltham, MA 02454
Oct 06, 2009 Compatible with swinging-bucket and fixed-angle rotors, Pierce® Concentrators are used for protein concentration, desalting, and buffer exchange. Design, consisting of regenerated cellulose membrane fused to conical device, optimizes concentration factor achieved in single centrifugation step while minimizing polarization and adsorption at membrane surface. Concentration factors of greater than 110-fold can be achieved in less than 45 min with 20 ml device or 30 min with 7 ml device.

Biohit Inc.
Neptune, NJ 07753
Oct 02, 2009 SafetySpace(TM) Filter Tips are offered in 7 different sizes from 10-1,200 µl and packed in color-coded single tray boxes. Certified as DNase-, RNase-, and endotoxin-free, presterilized, polypropylene tips are compatible with all Biohit pipettes and most other brands. Accuracy/precision is maintained even with foaming liquids, such as buffers and proteins, and products are suitable for reverse pipetting and for multiple dispensing with electronic pipettes.

Malvern Instruments Ltd
Malvern Worcestershire WR14 1XZ  United Kingdom
Oct 02, 2009 Designed for Zetasizer Nano particle characterization system, ZEN1010 enables measurement in samples up to 40% w/v. Design incorporates minimized optical path length and takes just 150 µl sample in measurement area. Although it operates as standard cell, ZEN1010 allows zeta potential measurements in highly concentrated samples. By requiring less sample dilution, it supports optimized maintenance of pH and chemical structure of sample for directly relevant zeta potential measurement.

MO BIO Laboratories, Inc.
Carlsbad, CA 92010
Oct 01, 2009 PowerWater RNA Isolation Kit isolates high-quality total RNA from variety of filtered water samples, including RNA from bacteria, fungi, and algae present in environmental samples. PowerWater bead tubes optimize lysis while Inhibitor Removal Technology provides high sensitivity in RT-PCR and allows processing of water with heavy amounts of contaminants to provide inhibitor-free RNA. Kit is compatible with common filter membrane types and provides results in less than 40 min.

Adept Technology, Inc.
Livermore, CA 94551
Oct 01, 2009 Available for meat and poultry processing, Quattro(TM) s650HS parallel robot gives food packagers optimal speed for raw-food handling without compromising cleanliness or hygienic standards. It features 4-arm kinematic - promoting speed, acceleration, and performance across entire work envelope - and is available with fixed platform option that adds flexibility for higher-payload products. Compact controls and embedded amplifiers facilitate installation and reduce workspace requirements.

Jeio Tech, Inc.
Des Plaines, IL 60018
Sep 30, 2009 Featuring vertical air flow adjustable from 274-914 cmh air volume, Laminar Flow Clean Benches meet ISO 14644-1 Class 4 Air Cleanliness Standards. Work stations have 304 stainless steel work surfaces and polyester prefilter to extend life of primary HEPA filter. Fluorescent and ultraviolet lighting are included in interiors, and available accessories include floor stands, service fixtures, gauges and outlets.

ForteBio, Inc.
Menlo Park, CA 94025
Sep 22, 2009 Dip and Read Immunogenicity Assay Kit, designed for use on Octet® platform, helps life science researchers measure immune response to therapeutic drugs during drug development. It includes protocols that work across many drug types, including antibodies, proteins, and peptides. Incorporated biosensors and basic reagents run enzyme-linked bridging assay and direct binding assay for use with human, primate, and other animal serum and plasma samples.

Lab Armor, Inc.
San Antonio, TX 78230
Sep 17, 2009 Suited for laboratory use in temperatures from -80 to over 350°C, Bath Armor(TM) Beads replace water in water baths, aluminum blocks in dry baths, and ice in ice buckets. Beads thaw, warm, and chill samples with optimal thermal efficiency, while avoiding common temperature fluctuations caused by evaporation. Since beads are self-supporting, racks and clip required to hold sample containers in position are eliminated and sample containers can be positioned at any angle.

Torrey Pines Scientific, Inc.
San Marcos, CA 92069
Sep 16, 2009 Featuring 12 in. square ceramic heater top with temperature range to 450°C, Model HS15 can heat and stir five 800 mL beakers at stirring range of 100-1,500 rpm. Unit measures 12.5 x 19 x 5.25 in. and can support over 50 lb on plate surface. Chassis design keeps spills out of interior of unit, and all controls are mounted well in front of heater surface to protect against accidental burns. Product is available in 100 Vac/50 Hz, 115 Vac/60 Hz, 220 Vac/60 Hz, and 230 Vac/50 Hz.

Harvard Apparatus, Inc.
Holliston, MA 01746 1371
Sep 08, 2009 Suited for moving emulsions, suspensions, and non-Newtonian fluids such as blood, Pulsatile Blood Pump is designed for cardiovascular and haemodynamic studies on mice, rats, and larger animals. It minimizes hemolysis with silicone rubber-covered valves and smooth flow paths made only of inert materials. Pump also enables studies of isolated organ perfusion, whole body perfusion, blood transfers, hydration/dehydration procedures, and blood cellular profiles.

Thermo Fisher Scientific, Air Quality Instruments
Franklin, MA 02038
Sep 04, 2009 Specifically designed for drug discovery, Cellomics Synaptogenesis High Content Screening Reagent Kit enables simultaneous detection of neuronal population, neurite, pre-synaptic vesicle, post-synaptic puncta, and synapse using fixed end-point assay that is based on immunofluorescence detection in cells grown on standard high-density microplates. In addition to HCS instruments, cells labeled by kit reagents can be viewed and analyzed by other fluorescence microscopes.

Tema Systems, Inc.
Cincinnati, OH 45249
Sep 01, 2009 Short Bowl Decanter sedimentation centrifuge for stage #1 lactose dewatering position features overhung bowl and scroll with bearing support at drive end only, allowing for simpified inspection after CIP cleaning by removing bolts on front cover to see discharge end of bowl and scroll. Removable inspection panels on housing allow for visual inspection of outside of bowl and shaft and seal area between back of bowl and product housing back partition.

Harvard Apparatus, Inc.
Holliston, MA 01746 1371
Aug 31, 2009 High Performance Small Animal Treadmill has adjustable speed up to 150 cm/sec and slope between -25 to +25° that enable forced exercise and fatigue testing. Rolling belt treadmill has models available with up to 5 lanes, and all units include shock source between 0-2 mA and SeDaCom Software for data acquisition. Single lane versions have optional CO₂ air tight enclosure for use with Oxylet System for metabolic studies.

Meissner Filtration Products, Inc.
Camarillo, CA 93012 8760
Aug 26, 2009 Available in sizes from 250 mL to 20 L, TepoFlex(TM) end-ported, hanging, 2D pillow-style biocontainers offer configurable porting, are 100% drainable, and are suited for fluid handling applications including sampling, delivery of process fluids, and holding of bulk and active pharmaceutical ingredients. TepoFlex(TM) film does not contain antiblock agents. With low extractables and leachables profile and high gas barrier properties, containers mitigate risk of product degradation.

Millipore Corp.
Bedford, MA 01730
Aug 25, 2009 Able to increase throughput for process development scientists, Mobius CellReady 3L Bioreactor has stirred-tank format suited for use in development and optimization of cell culture processes. Vessel design promotes predictability during process scale-up, and universal design ensures compatibility with most benchtop bioreactor control systems. While able to mimic characteristics of autoclavable bioreactors, system eliminates steps associated with cleaning, assembly, and sterilization.

Detroit Precision Hommel
Rochester Hills, MI 48309
Aug 25, 2009 Featuring dual-tip scanning system and ±1,500 µm measuring stroke, Hommel-Etamic Roundscan permits automatic measurement of form and roughness in one pass. System can handle parts up to 540 mm dia, 900 mm in height, and up to 100 kg. Positioning probe tip anywhere on workpiece, CNC-controlled rotation and tilt module guarantees measurements can be made automatically at any measurement position. Low friction guides on measuring axes also enable profile and waviness parameters to be evaluated.