Pro Mach Inc.    Loveland, OH 45140
Oct 09, 2012 With one-ton capacity, Shaka® 1600 single-basket agitation retorts are used for producing shelf-stable food packaged in cans, glass, semi-rigid, and flexible containers. Packaging is loaded in horizontal orientation to obtain optimum benefit, and all containers in retort experience same heat profile as to promote batch consistency. Minimizing processing times via operating speed, system is compatible with existing batch lines relative to footprint, utilities, and operating procedures.

Sterlitech Corp.    Kent, WA 98032
Oct 08, 2012 Accommodating needs of laboratory environments, EZgrip™ Carboy combines ergonomic, space-efficient design with series of interchangeable caps and spigots. Available material types include polypropylene, copolyester, HDPE, and PFA, and volumes range from 2.5–75 L. Rotary molded for maximum strength, each carboy features ergonomic handles and grips that facilitate handling and pouring. VersaCap and VersaBarb attachments allow carboy to support various tubulation arrangements.

BINDER Inc.    Bohemia, NY 11716
Sep 28, 2012 Designed for laboratory environments, UF V freezers with ULTRA.GUARD™ technology provide secure, long-term sample storage at temperatures to -86°C. DATA.SECURE™ data logger, included, provides USB connection and supports FDA guideline 21 CFR part 11 compliance, while temperature sensor provides redundant temperature monitoring. Multiple outputs are available and integrate into existing alarm systems. Inner chambers are of stainless steel and feature 4 compartments and 3 shelves.

Olympus Europa Holding GmbH    Hamburg 20097  Germany
Sep 27, 2012 Designed for live cell imaging and clinical analysis, IX3 Series includes fully automated Model IX83 for high-end research; Model IX73, which can be configured in manual, semi-motorized, or motorized modes; and Model IX53 with fluorescent capabilities for examination of tissue samples. Models IX73 and IX83 have swappable deck design, which allows optical modules to be slipped in and out as needed, including magnification changers, filter turrets, and right side port.

JM Science, Inc.    Grand Island, NY 14072-0250
Sep 24, 2012 Suited for trace level water content determination, AQUACOUNTER® Karl Fischer Coulometric Titrator, Model AQ-2200S is available with 3 types of electrolytic cells, including small volume, standard, and 1-room, which requires only 25 mL anode solution. With both volumetric and coulometric channel, user can measure moisture over entire range from 1 ppm to 100% or double sample throughput with 2 identical KF stations. Ultra-trace moisture measurement mode provides accuracy of ≤10 µgH2O.

Life Technologies Corporation    Carlsbad, CA 92008
Sep 24, 2012 Using Ion PI™ chip, Ion Proton™ System can sequence exomes and transcriptomes in 2–4 hr. System will deliver 60–80 million filtered reads with read lengths from 100–200 bp and up to 10 Gb of output. Ion Reporter™ Software, offering cloud-based bioinformatics solution, performs alignments, identifies variants, and delivers automated annotation on data for paired tumor normal samples, and trio samples for inherited disease. Ion OneTouch™ 2 and Ion Chef™ systems provide automated template preparation.

Headwall Photonics, Inc.    Fitchburg, MI 01420
Sep 21, 2012 Optimized for 250–600 nm UV-VIS spectral band, Hyperspec UV Starter Kit provides everything needed to evaluate and categorize spectral composition of materials and samples within UV spectral region. This hyperspectral imaging system, designed for laboratory researchers, comes with Hyperspec UV imaging spectrometer, gantry assembly, calibrated power-stabilized lighting, linear stage and controller, and processor engine with Hyperspec software.

Malvern Instruments Ltd    Malvern Worcestershire WR14 1XZ  United Kingdom
Sep 21, 2012 Dynamic light scattering (DLS) system, Zetasizer Nano ZSP, can measure zeta potential (electrophoretic mobility) of proteins via included software that controls data acquisition. Guiding user through measurement while assessing and reporting on data quality, software also allows rheological characterization of weakly-structured and highly strain-sensitive materials using microliter sample volumes.

Pratt & Whitney Measurement Systems, Inc.    Bloomfield, CT 06002
Sep 20, 2012 Featuring laser interferometer, air bearings, and bi-directional probes, Labmaster Long Length Universal Model 1000A offers direct reading range of 40 in. Probe movement and table movements such as swivel, centering, tilt, and elevation adjustments are controlled with press of button or click of mouse. Automated positioning, alignment, and measurement practically eliminate operator influence and minimize measurement time. Instrument configurations can be saved and recalled at later time.

JDV Products, Inc.    Fair Lawn, NJ 07410
Sep 19, 2012 Constructed of gel-like polyurethane material, VESSEL Clean-Walker-EASY Model CW-900EZ has elastic adhesive surface that picks up dust and dirt particles in hard to reach areas such as in tiny grooves on bottom of shoes and on outer edges of wheels from trolleys and carts. Three-layer structure includes non-woven fabric core, which prevents tears. Supplied in 2 individual tiles covering total area of 19.7 x 35.4 in., mat is 1/8 in. thick, can be cleaned with water, and can last up to 3 years.

NuAire, Inc.    Plymouth, MN 55447
Sep 13, 2012 In-VitroCell ES (Energy Saver) series, offering 7 ft³, crevice-free, stainless steel interior, utilizes single source dual wave IR sensor to maintain accurate CO2 gas levels in growth chamber. Depending on model, direct heat units offer dual sterilization cycles, humidity control, fuel cell oxygen control from 2%–21%, zirconia oxygen control from 0.5%–21%, humidity and fuel cell oxygen control from 2%–21%, and humidity and zirconia oxygen control from 0.5%–21%.

KLA-Tencor Corp.    San Jose, CA 95134
Sep 10, 2012 Designed to address complex overlay challenges associated with single- and multi-patterning lithography techniques at advanced sub-28 nm design nodes, Archer(TM) 500 accurately measures and characterizes overlay error. Measurement speed and precision enable thorough overlay characterization on wafers after patterning to help verify that pattern features have been correctly aligned to previously-patterned features, located on either same layer or prior process layer.

Bel-Art Products    Wayne, NJ 07470
Sep 10, 2012 Powered by 3 V lithium battery, Scienceware® Colony Counter marks, counts, and gives audible and visual alert each time count is registered on digital display. Pen-style design minimizes likelihood of error, combining all aspects of counting into one motion. Error is further reduced by ability to count both up and down to verify sample counts. Able to store up to 35 sample counts in memory, unit can also display sum total of all colonies counted.

Burlington Medical Supplies    Newport News, VA 23603
Aug 30, 2012 Custom-made Table Pads utilize Mega Grip coating, which helps to prevent slippage and eliminates need for Velcro straps that sometimes show up as artifacts in imaging scans of medical patients. Pads also feature Tri-Foam interior, which is effective in eliminating pressure points for patients in catheterization labs and operating rooms.

Paul N. Gardner Co., Inc.    Pompano Beach, FL 33060 6608
Aug 28, 2012 With NIST traceability, ACCU-SAFE Enclosed Chamber Thermometers measure critical temperatures in blood bank refrigerators, ultra-low freezers, freezers, refrigerators, incubators, ambient/room, block heaters, and ovens. Spirit-filled products, encapsulated in shock absorbing flouropolymer safety-shield, do not contain any mercury. Unbreakable plastic bottle is filled with non-toxic insulating liquid, while annealed glass and engraved stems offer accuracy with 0.1, 0.5, and 1.0°C divisions.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 20, 2012 Providing controlled environment for polymerase chain reaction (PCR) tests, Purifier® Filtered PCR Enclosures minimize cross contamination by producing ISO Class 5 work area and utilizing UV light to denature contaminating DNA/RNA. ISO Class 5 air, created from room air drawn through pre-filter and 99.99% efficient HEPA filter, is constantly projected down over work area in laminar flow pattern. Digital timer provides UV light exposure continuously or selectable increments from 5-240 min.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 20, 2012 Available in overall height of 33 in., FlaskScrubber® 33 and SteamScrubber® 33 can be accessed by all lab associates for loading and unloading. SteamScrubbers have top and bottom racks that accommodate accessory inserts for variety of glassware shapes and sizes - primarily beakers and other wide-mouth glassware. Equipped with tower spindle racks that hold up to 36 pieces, FlaskScrubbers handle narrow-necked glassware such as volumetric flasks. All racks are interchangeable among washers.

AirClean Systems, Inc.    Raleigh, NC 27604
Aug 20, 2012 Using bonded carbon filtration, Patriot(TM) Ductless Fume Hoods capture fumes, vapors, and gases, and can be placed virtually anywhere without need to connect to building infrastructure. AirSafe(TM) NXT controller provides touchscreen access to all critical operation and monitoring functions. Constructed of chemical resistant polypropylene, hoods are available in multiple widths, heights, depths, and sash configurations.

Chandler Engineering    Tulsa, OK 74147
Aug 20, 2012 Consisting of pressurized fluid reservoir, 2 injection pumps, and 3 capillaries, Model 5600 prepares and loads water-based oil and gas fracturing fluids dynamically into rotational viscometers for testing. Fluid is pumped through capillaries at various rates and durations to simulate pumping conditions experienced during fracture simulation treatments. System can be operated manually as stand-alone unit or run using SHS software, which monitors and records all measured parameters.

Labconco Corp.    Kansas City, MO 64132 2696
Aug 17, 2012 Designed for delicate cell research, Purifier® Cell Logic® Biosafety Cabinets provide protection from hazardous particulates. Scope-Ready(TM) option allows customer-supplied microscope to be integrated into cabinet while still conforming to NSF® specifications. Pure-Vu Seal allows clear, ergonomic view into cabinet, and flexible, chemical-resistant eyepiece seal prevents contaminants from escaping. With Temp-Zone(TM) option, heated or chilled samples remain at optimum temperature.