Xenetech USA, Inc.    Baton Rouge, LA 70817
Mar 25, 2013 Available with rotary engraving systems or with electronics upgrade retrofits, 6 in. horizontal by 3.56 in. vertical display has WVGA (800 x 400) resolution, 262,000 colors, and USB 2.0 interface with transfer speed of 480 Mbps. Screen, which is part of plastic design that folds flat when not in use, lets users locate job files within host hard drive and network as well as preview, pan, and zoom in on job before engraving. Screen also enables complete, real-time control of job execution.

Xenetech USA, Inc.    Baton Rouge, LA 70817
Mar 22, 2013 Viper® systems are available with Nano-Xen controller firmware technology that drives stepper motors in finer, smoother rotation while creating higher resolution and less vibration. Typical drive configurations require 3,200 step pulses to rotate stepper motor one complete revolution, and Nano-Xen technology uses 12,800 pulses for one rotation. This minimizes noise and enhances output quality while maintaining system's rated engraving speed.

Syneo    West Palm Beach, FL 33404
Dec 28, 2012 Equipped with UV laser utilizing 355 nm wavelength, Accu-Lase V200 supports precision cutting of polyimide tubing and complex hole making as well as polymer marking. System handles ODs from 0.012–0.150 in. and input lengths from 5–72 in. Providing marking speeds of 5–1,000 mm/sec, machine features automatic mandrel insertion, vision system for viewing of process, and automatic feed from batch loading.

SIC Industrial Marking Canada, Inc.    Boucherville J4B2X2  Canada
Dec 18, 2012 Portable dot peen marking systems are available for marking flat and round work pieces. Employing electromagnetic dot peen technology, units have balanced design, are built with cast aluminum body, and can withstand shop environments. Available marking head sizes include p62 and p122, with respective marking windows of 60 x 25 mm and 120 x 25 mm. Programming is accomplished via e9 controller through sealed membrane keypad or included software.

K-Sun    Somerset, WI 54025
Oct 24, 2012 Using thermal transfer technology and LABELShop® cartridges, PEARLabel™ 270 and 360 respectively print 270 and 360 dpi on 105 and 126 different industrial heat shrink tube, wire wrap, and special labeling supplies from 1/6–1 in. and 1/6–1.5 in. Included software supports 15 bar code formats and comes with 839 application-specific symbols; mobile app is also available. Along with half-cut function, PL 360 features PeelGuard® tape trimmer. Both printers offer adjustable margins down to 1 mm.

Gravograph - New Hermes Inc.    Duluth, GA 30096
Oct 23, 2012 Provided with LaserStyle™ graphics engraving software, LS900 has power sufficient to anneal steel and accommodates needs of such permanent marking applications as industrial panels and plates, direct part marking, signage, and barcodes. Fiber laser technology makes it possible to directly mark metal without first applying ceramic substrate, and Point Shoot red laser facilitates job setup and validation. Machine is built with cast aluminum frame and 55 lb capacity table with 9.8 in. Z axis.

Gravograph - New Hermes Inc.    Duluth, GA 30096
Oct 19, 2012 Featuring Class 1 enclosure and 23 x 21 in. marking chamber, Fibre300 uses Galvo 30 W, air-cooled laser system to mark metals, stainless steel, alloys, and reflective materials as well as ceramics and plastics. Size of buttons on handheld remote control facilitates driving 12 in. Z-axis, embedded work area light, focusing diode, fume extractor, and optional automatic door. Able to accommodate rotary devices, marker also comes with several safety features and LaserStyle™ software.

SIC Industrial Marking Canada, Inc.    Boucherville J4B2X2  Canada
Oct 16, 2012 Offering 160 x 100 mm marking window, Model e8-c153 z-a is suitable for part marking with data matrix codes and human readable text. Tungsten carbide stylus assembly, equipped with Autosense feature, enables marking head to descend automatically to part whereby stylus will touch component and then back off preprogrammed distance to ensure consistent marking depth. Files can be created on PC and downloaded to e8 controller or controller can be run directly from PC utilizing graphical display.

Agie Charmilles, LLC    Lincolnshire, IL 60069
Oct 12, 2012 With mechanical design and digitized process, 5-axis LASER 4000 5Ax adds unique and various textures to oversized molds for range of components covers for automotive and other industries. Unit enables components as large as 3 x 4 m and as heavy as 18 tons to remain stationary on floor while machine's axes move around it, texturing on all part sides if required. Additionally, functionality is capable of 3D distortion of texture and masters texture direction related to part shape.

SPTS Technologies Limited    Newport   United Kingdom
Sep 07, 2012 Allowing flexible multiple mode operation with dual source design, Pegasus Rapier Module offers uniformities of ±2.5% on 300 mm bonded Through Silicon Via wafers. In its principal mode, optimum etch depth uniformity is achieved to edge exclusion of 3 mm, preserving total thickness variation of good incoming wafers. Available on Pegasus Rapier, ReVia(TM) end-point system detects point at which TSV chips are revealed, enabling consistent reveal height from one wafer to next.

Universal Laser Systems, Inc.    Scottsdale, AZ 85260
Aug 27, 2012 Universal's Camera Registration (UCR) combines one camera that locates and determines exact position of registration marks on pre-printed materials, and software that adjusts predefined cut path to fit material. This combination accelerates and facilitates processing of preprinted materials that require precision cutting in register with printing. This solution is offered as accessory on ILS platforms.

SIC Industrial Marking Canada, Inc.    Boucherville J4B2X2  Canada
Jul 30, 2012 Based on optic fiber and sources ranging from 10-50 W, Model i 103 l-g operates up to 100,000 hours without maintenance and meets marking needs on plastic or metallic parts which are subjected to close tolerances or very high rates of production. Stand-alone fiber unit controller eliminates need for PC. With fiber laser system, all marking types are possible, including alphanumeric, Datamatrix, logos, deep or superficial.

Automated Laser Corp.    Fort Wayne, IN 46818
Jul 05, 2012 Comprised of 20 W, Windows®-based fiber laser marking systems, FRG Series is capable of marking range of materials with permanent and precise text, barcode, or Hi-Res graphics for range of applications that includes medical, automotive, electronics components, and more. Lasers do not require any consumables, clean-up, or direct part contact, fostering effective system integration.

Cerro Wire & Cable Co., Inc.    Hartselle, AL 35640
May 17, 2012 Used in conjunction with True Sequential Footage(TM) sequentially printed cable reel, which provides accurate wire length with each cut, Max Print® enables contractors to identify wire manufacturer and size and view sequential footage in large print, facilitating installation and inspection. Max Print is available on 1 AWG - 750 MCM THHN-2/THWN-2 products and is suited for use in warehouses and job sites where lighting is an issue.

Simrit, A Div. Of Freudenberg-NOK    Plymouth, MI 48170
May 11, 2012 Simrit's safe® laser marking technology protects against product reverse engineering and enables easy identification of original and spare sealing components. System marks elastomer components with an anti-fraud designation that is invisible to naked eye. This identification contains key product information, including an item description, model number, dimensions, material, date of manufacture and serial numbers, for reliable traceability and counterfeiting protection.

Borries Marking Systems    Ann Arbor, MI 48108 1623
Apr 24, 2012 Used to mark steel and other metals, electro-hydraulic AccuMarker features embossing head that can rotate 330°, illuminating diode that indicates maintenance and displays battery power level, as well as compact hydraulic power unit. Different standard tools can be inserted at top and bottom of C-frame, which has opening width that can be adjusted in increments of 5 mm up to 60 mm max. Portable tool comes in 3 power levels, providing marking forces of 18, 50, and 120 kN.

Direct Color Systems    Rocky Hill, CT 06067
Apr 17, 2012 Accommodating parts up to 10 x 24 x 6 in., Direct Jet UV LED printers can apply text, codes, and logos/images to metals, plastics, ceramics, and other materials. Print head allows small, delicate parts to be marked without damage, and fine detail text for OCR applications is made possible with ink droplet size as small as 1.5 pL. Among others, part marking applications include barcode, part ID, UID, equipment faceplates, serial plates, microchips, electronic components.

Gigamon Systems    Milpitas, CA 95035
Feb 22, 2012 Providing hardware-based time stamping directly at ingress ports, H Series GigaPORT-X12-TS line card supports PTPv2 timing standard, enabling High Frequency Traders and brokerages to analyze, evaluate, manage, and tune latency of transactions. Such visibility assists analysts in pinpointing and eliminating causes of communication delay. Time stamping technology enables out-of-band network analysis to occur at single location, which drives operational efficiency.

Unitek Miyachi Corporation    Monrovia, CA 91017 7133
Dec 12, 2011 Suited for scribing and cutting materials such as alumina, silicon, copper, and aluminum foils, LMF 2000-SM accommodates needs of fine marking (less than 30 microns) and micromachining applications. Fineness of beam, less than 30 microns, optimizes work area. Additional features of this 20 W unit include beam quality, with M2 of less than 1.2; depth of focus optimized for marking on curved surfaces; as well as support for rotary and XYZ motion options.

Torchmate    Reno, NV 89502
Nov 10, 2011 Delivering plasma cutting, engraving, and routing capabilities, Growth Series(TM) 4X4(TM) machine can be used to design and cut everything from intricate and professional-quality metal parts to chassis or suspension components. Features include 3-axis motorized system (2 X-axis drives and one Y-axis drive and motor), optional water table, and software. Compatible with various tools, robotic metal cutting machine can produce multiple copies of same metal part with one computer click.