HVAC

HVAC

Steam Boilers prevent leaky tubes.

Feb 12, 2002

EX Series gas/oil steam boilers have rows of vertical water tubes sandwiched between 2 ring-shaped headers. Because headers are only attached to tubes, they float, unconstrained, up and down with tubes' thermal expansion and contraction. Boilers reach full steam in 5 min and maintain 85% fuel to steam efficiency. Read More

HVAC

Flexible Water Boilers come in sizes from 6 through 25 BHP.

Feb 07, 2002

DR Series steam and hot water boilers are available in forced draft gas, oil, or dual fuel (gas/oil) fired models. They utilize tube configuration, which provides water-cooled combustion chamber, and stimulates heat transfer. Removable/replaceable tubes require 24 in. for maintenance access. Largest size DR Series boiler is 33-7/8 in. wide, and will fit through most doors. Read More

HVAC

Fume Extractor Arms have external support.

Feb 05, 2002

Fume extractor arms are available with 6 or 8 in. diameters, or as stainless steel models, which provide non-corrosive washable means to extract hazardous materials such as pharmaceutical dusts and acidic or caustic chemicals. They have no encumbrances inside, which allows for clear and free movement of contaminated air. All adjustments for settings of arm are accessed from outside. Units come... Read More

HVAC

Air Conditioners offer low and high pressure control.

Jan 29, 2002

2K Series industrial window/wall air conditioners are suitable for use in high dirt or corrosive environments, and are available in 5 capacities: 12,000, 18,000, 24,000, 30,000 and 36,000 BTU. They offer 10 fin per in. evaporator and condenser coils, corrosion resistant baked phenolic coating on condenser and evaporator coil, slide out chassis, and reciprocating hermetic compressor. Blower/fan is... Read More

HVAC

Ionizing Air Blower and Bars eliminate static charge.

Jan 29, 2002

Aerostat Phoenix Ionizing Air Blower provides high volumes of ionized air to eliminate static charge from materials or surfaces where high voltages are created. It offers internal power supply, variable fan speed control, built in emitter point cleaner, illuminated ionization indicator, and on/off switch. Phoenix can neutralize static charges from up to 10 ft away. Static neutralizing bars come... Read More

HVAC

Air Conditioner operates in tough environments.

Jan 29, 2002

Rugged HD Series has corrosion resistant baked phenolic coating on condenser and evaporator coils, copper plumbing, totally enclosed blower and fan motor, roller bearings on blower shafts, stainless steel drain pan, and 18 gauge Galvalume cabinet and chassis. Packaged unit is available in capacities from 5 to 20 tons, in air and water cooled versions, and in vertical and horizontal systems.... Read More

HVAC

Fans achieve required air pressures at low speeds.

Jan 29, 2002

Multi-Wing(R) 8D Series Fans have low-noise, twisted broad paddle thermoplastic blades and aluminum mounting hubs, which make fans suitable for HVAC applications. Fans are available in range of standard configurations. Options include 2 or 4 blades, diameters from 12 to 26 in., and 4 blade angles. Modular design permits almost unlimited flexibility. Read More

HVAC

Dust Collector occupies 10 sq ft of shop space.

Jan 29, 2002

Model 2.3x3S/D multi-function smoke and dust collector collects smoke from welding operation, converts to downdraft bench for finishing operations, and can be fitted with duct wye and blast gate to collect dust from metalworking operations. Its 3 hp blower moves 1,500 CFM of air. Collector also offers high-efficiency permanent fabric filter and removable dust pan. Options include activated carbon... Read More

HVAC, Thermal & Heating Equipment

Electric Baseboard Heaters are CSA approved to UL standards.

Jan 28, 2002

BAI/BASI Series architectural heaters provide large amounts of quiet heat where fan noise is distracting and unacceptable. Constructed of heavy gauge steel, units are available up to 4 kW. BII/BISI Industrial heaters are constructed of heavy gauge, painted steel with screw assembly for additional strength and are available up to 2.5 kW. BCI/BCSI commercial heaters feature aluminum cover with... Read More

HVAC, Sensors Monitors & Transducers

In-line Flow Sensors are used for liquids and gases.

Jan 25, 2002

D04 and D10 self-contained flow sensors monitor changes in flow as low as 5 ml/min (0.001 gpm). They connect directly into pipeline and maintain accuracy during changes in media temperature. Sensors are available with discrete transistor output or 4-20 mA analog signal output, both in DC only. Each can be set up for various applications using adjustment potentiometer on front of housing. All... Read More

HVAC, Safety & Security Equipment

Insulation improves HVAC system operation.

Jan 22, 2002

Duct Wrap Insulation is resilient, blanket-type insulation installed on HVAC ductwork. Composed of glass fibers bonded together with thermosetting resin, it helps control heat loss and condensation during system operation. Ductwork enclosed in duct wrap can handle conditioned air at temperatures from 35° to 250° F for faced duct wrap and 35° to 350° F for unfaced wrap. Faced duct wrap... Read More

Controls & Controllers, HVAC

Temperature Controller works in water systems.

Jan 17, 2002

Microprocessor based 1/16 DIN PID controller provides precise, stable, straight-line control in circulating water temperature control systems. It has autotuning, thermocouple and RTD inputs, programmable soft start, dual LED display of setpoint and liquid temperature, and menu-driven operation. Other applications include temperature control systems in plastics, chemical, packaging, and food... Read More

HVAC, Material Handling & Storage

Rotary Air Compressor reduces energy consumption.

Jan 11, 2002

Compressor's hybrid permanent magneto HPM synchronous motor features independent coil modules that can be removed and serviced. HPM motor directly drives compressor, eliminating need for motor bearings, gears, pulleys, belts, couplings, or motor shaft seals. With fewer components to wear out, leak or get out of alignment, compressor offers increased reliability and simple maintenance. Read More

Fluid & Gas Flow Equipment, HVAC

Industrial Filters are available with 10 or 12 ga housing.

Jan 11, 2002

High-ratio modular, round and square filters cover most applications, outdoors or indoors, in capacities from less than 100 to more than 100,000 CFM. Filters have large volume air tanks and high air inlets to reduce re-entrainment of dust on bags, durable and reversible access doors, wide exterior flanges made of thick steel for strength, and tube collars crimped for airtight seal. Each cage has... Read More

HVAC, Sensors Monitors & Transducers

Flow Fitting/Sensors are for low-to-high flow measurement.

Jan 11, 2002

Positive displacement Type S070 Flow Fitting and Type 8071 Flow Sensor control fluids with max viscosity of 1,000 cP. Combined measuring capabilities are from 0.5 gph to 180 gpm. S070 fitting connects to Hall or reed switch sensors via 1/4-turn and is available with process connections of 1/4 to 3 in. (G or NPT) and up to 2 in. ANSI (flanged). Type 8071 incorporates non-intrusive Hall-effect... Read More

HVAC

Propeller Fans push air with 5 or 10 blades.

Jan 07, 2002

Aerofan has cast aluminum motor mount that accepts wide range of motors, integral safety guard that permits motor wiring without guard removal, and adjustable pitch airfoil propeller that operates in deep drawn epoxy coated venturi. Propellers are available with blades of glass reinforced polypropylene or pressure cast aluminum, mounted in cast aluminum hub. Fan is available in seven sizes from... Read More

HVAC

Tube Axial Fans are offered in medium pressure range.

Jan 03, 2002

Medium pressure tube axial fans are available with heavy-gauge construction, and are capable of performances exceeding 95,000 cfm with pressures up to 3.25 in. wg. They are available with direct and belt drive construction. Medium pressure axial fans are available with bolt-on straightening vane section to improve fan efficiency by up to 20%. Applications include commercial or industrial... Read More

HVAC

Cabinet Heaters mount anywhere.

Jan 02, 2002

Ranging from 2-24 kW, CUI Series heaters may be mounted on floor, wall or ceiling, or recessed into wall or ceiling. Standard voltages include 208, 240, 277 and 480, with other voltages available. Lengths range from 28-80 in., depending on kW and voltage. Extruded aluminum grille discourages tampering with finned, tubular heating element. Controls include built-in automatic reset thermal cutout... Read More

Electrical Equipment & Systems, HVAC

Flow Converting Devices can be used with blowers.

Jan 02, 2002

Flow-converting devices are for use with regenerative blowers ranging from 1/3 hp to 50 hp. Airflow can instantly change from vacuum to pressure, or can be rerouted to different lines. Flow converting devices can be actuated by 24 VDC, 115 VAC, 220 VAC, or pneumatically, and can be mounted directly to blower or down stream. Read More

HVAC

Transfer Fans ventilate small spaces.

Jan 02, 2002

Compact Model CBF Transfer Fans fit in place of standard 16 x 8 in. concrete block, provide performance to 500 cfm and up to 0.4 in. wg of static pressure, and can be mounted in any wall using furnished mounting flanges and powder coated steel grille. Efficient propeller, venturi and motor combine for low sound levels with minimal restriction to airflow, making fans suitable for ventilating... Read More