HVAC

Green & Clean, HVAC

Danfoss Highlights Innovative Compressor Solutions to Meet Energy Standards and low-GWP Refrigerant Regulations at 2016 AHR Expo

Feb 02, 2016

At the 2016 AHR Expo in Orlando, Fla., Danfoss, a leading manufacturer of high-efficiency electronic and mechanical components and controls for air-conditioning, heating, refrigeration, industrial, and water systems, highlighted its compressor solutions to address key industry challenges, including the increasing demand and standards for energy performance and part-load efficiency, as well as... Read More

HVAC

Burckhardt Compression to Deliver Hyper Compressor and Process Gas Compressor API 618 for LDPE Tubular Plant in the U.S.

Feb 01, 2016

Burckhardt Compression has been awarded an order to deliver a Hyper Compressor as Secondary Compressor and one Process Gas Compressor API618 as Primary/Purge Compressor for a large scale LDPE tubular plant. The customer is a vertically integrated producer of plastic resins and chemicals. The compressors to be delivered will be installed in a 400 KTA LDPE tubular plant which runs with higher... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Inclination and Tilt Sensors prevent heavy equipment from tipping.

Jan 29, 2016

As IP67-rated inclinometers with integrated RS-232 interface and flying lead cable, MTLT series operates from single 9–32 V supply and utilize MEMS sensors, over temperature calibration, and SmartSensing™ technology. Programmable tilt alarms, also included, can be used to lock out controls or trigger alarm or warning light. Respectively, models MTLT105S and MTLT110S are designed for... Read More

Controls & Controllers, Electrical Equipment & Systems, HVAC

LG Demonstrates Transformative Air Conditioning Solutions at 2016 AHR Expo

Jan 29, 2016

Advanced Technology and Efficiency Benefits Highlighted with Innovative Applications ORLANDO, Fla. - Air conditioning systems leader LG Electronics USA is demonstrating its expanded 2016 lineup of commercial and residential solutions, time-saving software and enhanced variable refrigerant flow (VRF) technology this week at 2016 AHR Expo, the world's largest industry trade show that caters to... Read More

HVAC, Machinery & Machining Tools, Services

Adding In-House Blast Capabilities | ABS Blast Rooms

Jan 27, 2016

Industry: Industrial Equipment Re-Manufacturer Application: Rebuild/Re-manufacture Industrial Municipal Equipment Components Abrasive Blast Systems, Inc. recently designed and installed a custom sandblast room which incorporated a below-floor, sweep-in, pneumatic-recovery trough. The sandblast room is 16'W x 30'L x 17'H and features an overhead crane system with two 5-ton bridge... Read More

HVAC, Test & Measuring Instruments

Temperature Sensor suits engine monitoring applications.

Jan 26, 2016

Installed under spark plug or head bolt, CHT-FS Series Cylinder Head Temperature Sensor monitors engine performance and critical over-temperature conditions. Flexible stem design allows for installation in high-temperature areas with limited clearance. Available for 10, 12, 14, or 18 mm OD bolts/spark plugs, Type K thermocouple features measuring range of -40 to +1,000°C. Typical applications... Read More

Electronic Components & Devices, HVAC

Curtiss-Wright Announces Support for New VITA 48.8 Air Flow Through (AFT) Cooling Standard Effort

Jan 25, 2016

Demonstrates industry's first AFT cooled 3U VPX COTS system at ETT 2016 symposium EMBEDDED TECH TRENDS 2016 (ETT) – HOUSTON, TEXAS – Curtiss-Wright's Defense Solutions division today announced that it will support the new VITA 48.8 Air Flow Through (AFT) cooling standard with a range of 3U and 6U modules designed to bring the advanced cooling technology to rugged deployed embedded... Read More

HVAC

Magnetic-Bearing Chillers provide 1,000 tons of cooling.

Jan 25, 2016

Ranging from 580–3,500 kW, YORK YMC² Centrifugal Chillers utilize magnetic levitation technology in driveline to spin without friction, minimizing sound levels as low as 70 dBA for quiet operation. Units also have standard variable speed drive to maximize efficiency. Utilizing low entering condenser water temperatures, chillers are capable of achieving values below 0.1 kW/ton at ... Read More

HVAC

Airgas to Exhibit at the International Production and Processing Expo 2016

Jan 25, 2016

RADNOR, PA – Airgas, Inc. (NYSE: ARG), one of the nation's leading suppliers of industrial, medical, and specialty gases, today announced that its Food and Beverage group will attend and exhibit at the International Production Processing Expo (IPPE) 2016 (Booth #B5759). As the largest annual trade show for the poultry, meat, and feed industries, IPPE will include more than 1,250... Read More

HVAC, Thermal & Heating Equipment

In-line Heater suits fluid heating applications.

Jan 21, 2016

Available in 250–4,000 W sizes, FLUENT™ In-Line Heater is designed as integrated solution that replaces multiple components and provides on-demand heating. Unit combines internal baffle to promote turbulent flow, high watt density layered heater circuit, low-profile axial lead exit, and internal thermocouple for high limit control. Powered by patented thermal spray technology, FLUENT... Read More

Fluid & Gas Flow Equipment, HVAC

Rooftop Intake Vent has efficient, contractor-friendly design.

Jan 21, 2016

Promoting energy efficiency while also helping to prevent roof system rot and mildew growth, Cobra® IntakePro™ rolls out and fastens with included 1 ¾ in. coil nails. Product can also improve attic ventilation airflow by up to 20% when installed with existing soffit/undereave vents in properly balanced ventilation system, and there is no need for alterations at soffit. Designed... Read More

Adhesives & Sealants, HVAC

Pres-On Features HVAC Foam Gasketing Tape Solutions at 2016 AHR Expo

Jan 21, 2016

Housing science, service, and deep application expertise within a single state-of-the-art manufacturing facility enables Pres-On to more efficiently provide adhesive product solutions to HVAC customers. BOLINGBROOK, IL – Pres-On will exhibit HVAC specific solutions at the 2016 AHR Expo, occurring January 25th through 27th at the Orange County Convention Center in Orlando, Florida. The AHR Expo... Read More

Green & Clean, HVAC, Thermal & Heating Equipment

Cambridge Engineering Products May Qualify for Extended Tax Deductions

Jan 20, 2016

Owners of warehouses and other commercial structures could receive 100% deduction for the addition of energy-efficient HTHV products in 2015 and 2016 ST. LOUIS – On December 19 of 2015, the President signed into law the Protecting Americans from Tax Hikes Act.  This law includes the extension of the 179D Tax Deduction, also known as the EPAct, originally signed into law by President Bush in... Read More

Fluid & Gas Flow Equipment, Green & Clean, HVAC

Tecogen to Showcase Ilios Gas Heat Pump at AHR Expo

Jan 19, 2016

WALTHAM, Mass., – Tecogen® Inc. (NASDAQ: TGEN) is pleased to announce the company will be attending the AHR Expo in Orlando Florida. Running from January 25(th) - 27(th) 2016, the International Air-Conditioning, Heating, Refrigeration Exposition (AHR) will be held at the Orange County Convention Center located at 9899 International Drive. Displaying the most advanced products and... Read More

HVAC, Materials & Material Processing

Creating Better Options in the Food Industry

Jan 18, 2016

Komax Systems Sanitary Mixers and Steam Heaters Dominate Today's High Quality Food Plants HUNTINGTON BEACH, Calif. - All too often you buy a product with that lifeless, generic taste, something to make you yearn for a day when everything was made with love. This is not, however, a necessary sacrifice when growing from small batch operations to something more robust. With the use of Komax... Read More

HVAC, Sensors Monitors & Transducers, Test & Measuring Instruments

Temperature/Humidity Sensor features 3-digit 7-segment LCD.

Jan 14, 2016

Compatible with ENVIROMUX-2D/5D/16D Enterprise Environment Monitoring Systems, ENVIROMUX-STHS-LCD can be used to detect and view real-time temperature and non-condensing relative humidity values from -4 to 140°F and 0–90%. Wall-mountable sensor has temperature accuracy of ±0.72°F for 14–140°F and ±0.90°F for -4 to 14°F. Humidity accuracy is ±3% at 0–80%... Read More

Green & Clean, HVAC, Materials & Material Processing

New Refrigerants Approved for 2-stage Reciprocating Compressors

Jan 13, 2016

New refrigerants approved for 2-stage reciprocating compressors

  • R448A and R449A environmentally friendly alternatives to R404A and R507A
  • GWP values below 1400 for low temp applications
Flowery Branch [GA - The compressor specialist BITZER has optimised its 2-stage reciprocating compressors. All models can now be run with R448A and R449A refrigerants and thermostatic... Read More

Green & Clean, HVAC

BITZER at the AHR Expo Trade Fair in Orlando

Jan 13, 2016

The long-standing company BITZER will be showcasing its latest highlights in reciprocating, screw and scroll compressors at AHR Expo 2016  • CKH reciprocating compressors for CO2 applications  • ECOLINE with capacity control  CRII and VARISPEED  • Tried-and-tested CSV and CSH screw compressors Flowery Branch, – 80 years of experience in innovation and... Read More

HVAC

Liquid Chillers include water fittings in front and back.

Jan 08, 2016

Whether Models RLC-900 and RLC-1800 are mounted internally or externally, user can access water inlet and outlet hoses from either end of chiller. Rack mounted units include Pulse Width Modulating controller with fan speed control that enables chillers to slow fan automatically, minimizing noise as units reach set point. Additional features include USB communications port and 4 independent PID... Read More

HVAC

Duct-free Mini Splits offer variety of control options.

Jan 08, 2016

Offered in both single- and multi-zone versions, Luxaire® Duct-Free Mini Split Systems offer ultra-high efficiency up to 30 SEER. Systems come in capacities from ¾–4 tons with operating temperatures ranging from -22 to 129°F. Wi-Fi, wired, and central control options are available.  Read More