SL Power Presents Highly Efficient Power Supplies for Medical, LED Lighting, Test and Measurement Applications at Stand 263 During Electronica 2016October 24, 2016
Powering Critical Solutions is the Theme for 4-day Munich Show VENTURA, Calif. — SL Power Electronics, an industry leader in the designing and manufacturing of high-efficiency power supplies, will showcase their families of AC/DC power solutions for a wide range of medical, LED lighting and entertainment systems and test and measurement applications during electronica 2016 in Hall A3, Stand... Read More
New and refurbished urinalysis analyzers include models from such manufacturers as Bayer, Siemens, and Stanbio. These products offer broad menu of tests for diverse medical conditions and diseases. Reagents, controls, and consumables as well as service contracts may be available, and refurbished models come with 90-day parts warranty. All instruments accelerate accurate results for labs and enable proper diagnostic and therapeutic decisions.
In addition to China Compulsory Certification (CCC) and Korea Certification (KC) agency approvals, TMPC-700 carries UL, cUL, TUV, CE, and CB agency approvals. Product complies with ATX12V standards as well as 80 PLUS Bronze high efficiency and meets 4th edition EMC standards. Available DC voltage outputs and max loads are +3.3 V/24 A, +5 V/30 A, quadruple +12 V/16 A, -12 V/0.5 A, +5 Vsb/3.5 A and -5 V/0.2 A, and max total output is 700 W; combined output of +3.3 and +5 V is limited to 180 W. Read More
Precision healthcare and medical 3D printing solutions enable surgery to alleviate pain caused by spinal deterioration LITTLETON, Colo. - 3D Systems (NYSE:DDD) announced today the successful spinal surgery of national sled hockey champion Mark Weimer, aided by 3D Systems’ proprietary digital manufacturing workflow for healthcare. The complicated 15-hour surgery was performed by Dr. George... Read More
With 90–264 Vac input, PPWAM360 Series includes 5 single output models rated at 12, 24, 28, 48, and 54 Vdc. Power supplies meet Body Floating rated output requirements, are Class I rated, and have UL/EN60601-1 3rd Edition Medical and UL/EN60950-1 2nd Amendment ITE approvals. Operating from 0–70°C, units are 90% efficient at 230 Vac with <100 µA at 264 Vac earth leakage current, 2X MOPP primary to secondary isolation, and short circuit/overload/overvoltage protection. Read More
Featuring 85–265 Vac continuous input range with 0.98 active power factor, TMP65 Series offers single output voltages of 12, 15, 18, 19, 20, or 24 V with continuous output power up to 65 W. Medical grade desktop power adapters withstand ESD of 8 kV contact and 15 kV air. Class I units have IEC 320/C6 AC inlet with ground pin, while Class II units, furnished with IEC 320/C8 AC inlet without ground pin, are double insulated. Measuring 5.08 x 2.01 x 1.22 in., adapters offer >87% efficiency. Read More
Featuring 85–265 Vac continuous input with 0.98 active power factor, TMP65 Series offers single output voltages of 12, 15, 18, 19, 20, or 24 V. Class I units come with IEC 320/C6 AC inlet with ground pin, while Class II units, furnished with IEC 320/C8 AC inlet without ground pin, are double insulated. Housed in black plastic enclosure with 2.5 x 5.5 x 11 mm right angle barrel plug, desktop power adapters help meet 4th edition EMC standards, withstanding ESD of 8 kV contact and 15 kV air. Read More
Designed to meet home healthcare device power requirements, ME40 Series consists of external, 40 W, medical-grade AC/DC power supplies. Design adheres to medical device standards IEC60601-1 3rd Edition as well as U.S. Department of Energy Level VI efficiency requirements of minimum no-load power and efficiency. In addition to adhering to UL/EN/IEC60601-1-2, 4th edition for EMC, series offers 2x MOPP input to output isolation and employs electrolytic capacitors to offer >8-year product life. Read More
Providing 360 W regulated power in 4 x 6 in. footprint, open frame PPWAM360 Series complies with international medical safety regulations per IEC/EN/UL 60601-1 3rd edition, 2x MOPP primary to secondary level, and BF rated output requirements. Universal input range is 90–264 Vac, and available single-output voltages include 12, 24, 28, 48, and 54 Vdc. Operating from 0 to +70°C with derating above 50°C, series offers no load power consumption of <0.5 W and <100 µA @ 264 Vac Earth Leakage Current. Read More
Operating from 90–264 Vac input over -40 to +80°C range, convection-cooled and encapsulated TDK-Lambda KMS-A series includes 15, 30, and 60 W models offering output voltages of 5, 9, 12, 15, and 24 V. Full load ratings cover -30 to +50°C operation, and efficiencies range up to 89%. Rated for Class II operation, these power supplies does not require earth ground connection or external input filtering components and have off-load power draw of <0.1 to <0.3 W (depending on model). Read More
Providing 300 W of regulated power, open-frame CFM300M Series complies with international medical safety regulations and meets radiated and conducted emission requirements. Universal input range is 90–264 Vac, and available single-output voltages include 12, 24, 36, and 48 Vdc. Delivering efficiency up to 94% at 230 Vac, this 3.000 x 5.000 x 1.382 in. series operates from -40 to +80°C ambient with derating above 40°C. No load power consumption is <0.3 W, and leakage current is ≤300 µA. Read More
Available in open frame or optional chassis and cover package, 400 Watt NXT-400M Series offers up to 4 regulated DC output voltage combinations from 3.3–28 Vdc with inhibit available on all 4 outputs. Standard features include universal 85–264 Vac input, active power factor correction, over-power and over-voltage protection, power fail warning, remote sense, and 5 V/2 A standby output. Measuring 4 x 7 x 1.5 in., power supplies operate from -20 to +70°C. Read More
Using flat-panel detector, ImageVue™ DR50 enables low-dose radiation image capture in real-time at point of care without sacrificing diagnostic image clarity. Reduction in radiation promotes health and well-being of pets and veterinary professionals, while imaging capabilities enhance visualization of dense anatomy and fine anatomical structures. Capturing digital image in <8 sec, this radiography system can be combined with cloud-based IDEXX Web PACS software for remote access to images. Read More
Operating with up to 94% efficiency, TDK-Lambda CUS200M series operates from universal of 85–265 Vac input and can deliver 200 W when convection cooled and up to 250 W with 1.5 m/sec airflow. Nominal outputs, adjustable via potentiometer, include 12, 18, 24, and 48 Vdc, and such features as remote on/off and 5 V standby output are standard on all models. Drawing <0.5 W in standby mode, isolated products deliver full power with ambient temperatures of -20 to +50°C and 50% power at +70°C.
NEW YORK - Delta, a global leader in power and thermal management solutions, is showcasing its latest medical power supply series at the MDM East 2016 show in New York. Products on display include Delta's High Energy Density Medical open frame and enclosed power supplies, medical grade 30W wall mount adapters, and the new MDS-350AD701 power solution model with a 350W power rating. Visitors... Read More
Single-output AC/DC power supplies of 1.32 x 4.94 x 2.19 in. ALM65 series, approved to ITE EN/UL 60950-1 and IEC60601-1 / ANSI/AMMI ES60601-1 3rd edition medical safety standards, feature 250 µA max leakage current and 2 MOPP isolation. Operating from 80–264 Vac input with full power available from 90 Vac, series has fully sealed IP32 enclosure and operates from 0 to + 60°C. Class I or Class II input may be specified, and models with former can be ordered with input lead retention clip.
Featuring resonant, zero-switching topology, PM1100 Series operates from universal 90–264 Vac input and delivers 1,100 W continuous power (1,250 W peak). Single output voltages include 24, 28, 32, 34, 36, 42, and 48 V with 5 V/200 mA standby output; leakage current is <300 µA; and operating altitude is up to 5,000 m. Along with inhibit/PS-off and DC OK signals, features include variable-speed internal fan, overvoltage/overcurrent/thermal protection, and MTBF of 300,000 hr at full load/25°C. Read More
The ThermaPrint 64 has been specifically designed for medical Tyvek printing. Regardless of whether you want to print on Tyvek pouches or Tyvek lids, the ThermaPrint 64 ensures good quality at higher-than-average speeds. Available in multiple formats, printing can be done on Tyvek pouches, fine barcodes and strips. The average print speed is roughly 4-8 inches per second. The Thermaprint 64... Read More
Built specifically for pulmonary clinician, VIDA|vision™ provides insights to optimize care decisions and improve patient outcomes. Lung Bronchoscopy Planning focuses interventional pulmonologists on planning and performing diagnostic biopsy procedures for peripheral nodule. Lung Volume Reduction provides physicians with information to select appropriate therapy for severe emphysema patients, using evidence-based quantitative CT biomarkers to include heterogeneity and fissure integrity. Read More
Compliant to 4th edition medical EMC standards and featuring Class II construction, BF-rated THC35 series deliver up to 35 W continuous output with convection cooling and meets home healthcare environment requirements. Product operates from 90–264 Vac universal input and comes in 5, 12, 15, 18, and 24 V single-output models with touch current measuring 100 µA max @ 264 Vac, 63 Hz. Active efficiency is 87% typ @ 115 Vac and 89% typ @ 230 Vac, and dimensions are 2 x 3 x 1.12 in. Read More