seca    Birmingham   United Kingdom
Jun 07, 2013 With 8-point electrode Bioelectrical Impedance Analysis measurement method, seca mBCA 514 determines medically precise values of fat mass, extracellular and intracellular water, and skeletal muscle mass in less than 20 sec. Analyzer produces medically relevant results and is validated against medical science gold standard. While standing aid guarantees patient is always in same measurement position, hand-held electrodes prevent measurement errors and ensure results are reproducible.

Unetixs Vascular Inc    North Kingstown, RI 02852
Jun 06, 2013 Incorporating 19 in. touchscreen monitor on multi-axis mount, MultiLab® Series II LHSErgo IDC Vascular System enables ergonomically correct usage while sitting or standing. Touchscreen and keyboard feature moisture-proof design for disinfection. In addition, hoses and blood-pressure cuffs are disposable, accelerating cleanup while considerably minimizing potential for infection.

Wacker Chemical Corp.    Chino, CA 91710
Jun 05, 2013 Combining skin sensation produced by non-crosslinked silicone polymers with film-forming properties of silicone resins, BELSIL® REG 1100 serves as multifunctional active ingredient for skin-care applications and decorative cosmetic products. Transparent, colorless gel forms soft, water-repellant film that adheres well to skin without becoming sticky. BELSIL® ADM 6102 E, consisting of aqueous macroemulsion of aminofunctional silicone, delivers optimized hair-conditioning properties.

Murata Power Solutions, Inc.    Mansfield, MA 02048
Jun 04, 2013 Encapsulated in 7-pin SIP, MEJ1 series offers basic and supplementary isolation to UL60950 standard and is certified to continuous working voltage of 200 Vrms when operating in up to +85°C ambient. Input to output isolation is rated at 5,200 Vdc for 1 sec, and typical efficiencies range from 70%–78%. Comprising 38 models with single- and dual-output versions, series complies with 3rd edition of medical safety standard UL60601-1 and provides various degrees of MOOP (means of operator protection).

Keeler    Broomall, PA 19008
May 29, 2013 Utilizing Galilean converging binoculars and rotating 5-step drum that offers x40 magnification, Symphony Slit Lamp features tower illumination and slit projection system with continuously variable slit widths from 0–12 mm. Blue, red free, and neutral density filters and integral diffuser provide visual of whole eye at low magnification. To assess for Uveitis, 1 mm square graticule is included within aperture selections. Integral yellow fluorescein barrier filter is housed in optics block.

Sequent Medical, Inc.    Aliso Viejo, CA 92656
May 29, 2013 SL (Single Layer) series of WEB® Aneurysm Embolization Devices are made possible via MicroBraid™ technology, which is dense mesh constructed from extremely fine Nitinol wires. Low profile and enhanced navigability allows physicians to treat range of aneurysms. While WEB SL and WEB SLS have distinct shapes designed to accommodate varying aneurysm morphologies, both configurations are available in sizes from 4–11 mm and are designed for delivery through VIA microcatheters.

Nikon Metrology, Inc.    Brighton, MI 48116
May 28, 2013 Based on actively cooled, 225 kV micro-focus X-ray source, MCT225 HA supports range of sample sizes and material densities with 3.8+ L/50 µm MPEl accuracy in accordance with VDI/VDE 2630 guideline. System features manipulator guideways equipped with high-resolution optical encoders. Guideways are error corrected using laser interferometer mapping techniques. To minimize thermal effects, interior of enclosure is temperature controlled, creating conditioned measurement room stable to 20°C ±0.1°C.

Avalue Technology Inc.    Chung Ho City, Taipei   Taiwan
May 22, 2013 Renity Bedside Infotainment Platform is all-in-one computing solution with web browsing and email access, educational resources, entertainment, and automated services. Using touchscreen interface, patients can access Internet, telephone, instant messaging, hospital services, and more. Medical staff can access hospital information system and electronic medical records. It also connects with organization's infrastructure, information exchange systems, and content provider services.

Preventice, Inc    Minneapolis, MN 55402
May 21, 2013 Featuring 510(k) clearance from U.S. FDA, BodyGuardian Remote Patient Monitoring System (BodyGuardian RMS) detects, records, and wirelessly transmits physiological data in support of remotely monitoring non-lethal, cardiac arrhythmias in ambulatory patients. Sensor attached to patient's chest collects important data – ECG, heart rate, respiration rate, and activity level, which can then be transmitted to mHealth platform for storage and later retrieval by physicians.

Prexion, Inc    San Mateo, CA 94402
May 20, 2013 With 11 x 7 cm field of view, Eclipse 3D Cone Beam Computed Tomography Dental Scanner highlights 2-in-1 and 3-in-1 multi-functionality, featuring dedicated 2D Digital Panoramic and Cephalometric options as well as maintaining CBCT 3D diagnostic clarity. Wide Mode features enable clinician to capture full upper and lower dental arches, including entire third molar region. Scanner is suitable for dental offices that perform in-office surgical implant procedures as well as 3D imaging for diagnosis.

XP Power    Sunnyvale, CA 94085
May 16, 2013 Designed to meet 80 Plus Silver energy efficiency specifications, GCS150 Series features active PFC, typical efficiency of 93%, and no-load input power consumption of less than 0.5 W. Units are available with +12, +15, +24, +28, or +48 Vdc single output voltage; additional 12 V fan output is also available. Using convection cooling alone, medically approved power supplies can deliver up to 110 W. When using only 7 cfm of forced air flow, full output power of 150 W is available.

Stratasys, Inc.    Minneapolis, MN 55344 2020
May 16, 2013 Available for Objet EdenV 3D Printers, VeroDentPlus MED690 enables 3D printing of accurate dental models that offer appearance of dental stone with fine details and resolution. Material can be used in conjunction with all open intra-oral impression and plaster scanners and is optimized for printing models for crowns, bridges, orthodontic appliances, and implants. For optimal detail, Objet EdenV 3D Printers produce ultrafine 16 micron layers.

RF Technologies, Inc.    Brookfield, WI 53005
May 14, 2013 Part of Code Alert® Quick Response Plus Wireless Call Solution, call stations are available in 5 models: Push Button Call Station, Nurse Call Cord Station, Nurse Call Cord Station with Check-in, Pull Cord Call Station, and Pull Cord Call Station with Check-in. Check-in features can record non-alarm events, such as resident or staff check-ins, or time log. Each model includes LED that blinks red when device is activated, giving residents peace of mind that call was placed.

Assurance Biosense, Inc    Glastonbury, CT 06033
May 13, 2013 Via nasal ala, Assurance® Alar Sensor monitors oxygen saturation of arterial hemoglobin and pulse rate of adult and pediatric patients. Since measurement point is rich in vasculature and fed by external and internal carotid arteries, signals are highly responsive to change. Design and placement makes sensor immune to ambient light interference, which is common with fingertip sensors. By detecting signals even at low oxygen saturation and minimizing false alarms, sensor optimizes patient safety.

Olympus America, Inc.    Center Valley, PA 18034
May 13, 2013 With Rotary Function and wide tip angulation, 510(k) cleared BF-190 Bronchoscopes enable physicians to access areas of lung that may not be reached with other bronchoscopes. Units are powered by EVIS EXERA III Universal Platform, which provides detailed, endoscopic HDTV image for accurate diagnosis and treatment. Compatible with Olympus endoscopes used in other medical specialties, EVIS EXERA III minimizes need for multiple video systems, optimizing asset management throughout hospital.

Power Sources Unlimited, Inc.    Wrentham, MA 02093-2210
May 09, 2013 Offering 1-, 2-, and 3-output models with voltages from 5–48 Vdc, PM42 Series comprises 2 x 4 x 1.18 in., open-frame PCB constructed power supplies that meet UL60601-1 third edition medical safety and EN60950-1 ITE safety standards. Features include 90–264 Vac universal input, efficiencies up to 88%, over voltage and short circuit protection, leakage current of 150 µA max @ 264 Vac, and 4,000 Vdc input-ground withstand voltage. All models are available with optional chassis cover.

TRUMPower    Santa Clara, CA 95054
May 08, 2013 Featuring 90–264 Vac continuous input range with 0.95 active power factor, TMP220 Series offers single output voltages of 19, 24, or 28 V with continuous output power up to 220 W. Withstand voltage is 4,000 Vac from input to output and 1,500 Vac from input to ground. With standby power consumption lower than 0.5 W and efficiency higher than 87%, fanless desktop units are in compliance with CEC and Energy Star efficiency level V requirements. Units have both class I and class II insulation.

3M    St. Paul, MN 55144
May 06, 2013 Safety Sunwear consists of 1300-Series models with wraparound frame and nose pads; 1400-Series with aluminum frame, adjustable nose bridge, and spring hinged temples; and 1500-Series with removable foam gasket. Featuring wraparound frame, 1600-Series units have soft nose pads and color-accented temples. All units provide protection in harsh outdoor work environments. Products absorb 99.9% of UVA and UVB light and meet requirements for ANSI Z87.1-2010.

Emerson Network Power    St. Louis, MO 63136
May 01, 2013 Model NPS64-M, 60 W medical power supply operates at full load in 0–50°C temperature range and up to 80°C with suitable de-rating. Featuring 15 Vdc output and 90% peak efficiency, open-frame power supply provides universal input voltage range of 90–264 Vac and can also operate from 127–300 Vdc input. Unit requires less than 74 W of input power while no-load power consumption is under 300 W. Measuring 2 x 4 in. and 1 in. high, product also has built-in CISPR 22 Class B EMI filters.

Qosina Corp.    Edgewood, NY 11717 8329
Apr 30, 2013 Part #80451 orange, #80452 green, and #80453 gray Hemostasis Valves have 7.5 in. long sideport tubing that connects units to 3-way stopcock. Products also feature automatic pre-slit seal for items sized 0-0.105 in. with 0-2.7 mm dia. Included rotating male luer lock has vented female luer lock cap, while stopcock has 2 female luers, tube connection, and male luer lock cap. Pre-assembled components are non-sterile.