Receive industry and products news from the market categories that matter to you most.
Stay up to date on industry news and trends, product announcements and the latest innovations.
Offered in 9/16 in. wide x 5/16 in. high, INFINA™ ACX AC LED Linear Strips can be mounted in snap-in 3 ft channel or with mounting clips in dry, damp and wet locations. Units are made from thermoplastic polyurethane material and operated from 120 line voltage. Products come with run length of 100 ft and color choice of red and blue. LED Strips are equipped with thermoplastic jacket.... Read More
P1157E-500 Touch Panel PC features one PCIe x4 or one PCI slot. Integrated with aluminum front bezel, unit is designed with three RS-232 ports, one RS-232/422/485 port, four USB 3.0 ports and two Gigabit LAN. Product comes with 7th generation Intel® Core™ i7/i5/i3, Celeron® and Pentium® processor options and supports dual DDR4-2133 Long-DIMM sockets. P1157E-500 is equipped with built-in... Read More
Severtson Screens Showcases New SAT-4K Acoustically-Transparent Projection Screens at 2017 CEDIA ExpoJul 25, 2017
Now Shipping, the Made in the USA, Next Generation Enhanced SAT-4K Offers a Finer Weave and Brighter White Material for Increased Visual Performance While Not Impairing the SAT-4K’s Original Acclaimed Acoustic Abilities
VAC-U-MAX Exhibits Processing & Packaging Automation Solutions for Bulk Material Transfer to Filling Machines and Packaging Lines and, Industrial Vacuum Cleaning Systems for Powders & Combustible Dusts at Pack Expo 2017Jul 25, 2017
BELLEVILLE, NJ USA (July 24, 2017) – VAC-U-MAX proudly announces exhibition at Pack Expo 2017, September 25-27, Las Vegas Convention Center, Las Vegas, Nevada, Booth S-7217, exhibiting “Ready-to-Operate“ processing and packaging solutions for powder and bulk-ingredient transfer to filling machines and packaging lines. Specializing in the design, manufacture, engineering, and automation... Read More
Suitable for motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brake position applications, ILPS-19 Series Inductive Linear Position Sensors are offered in six ranges from 25 to 200 mm. Units come in 19 mm diameter anodized aluminum housing. Product is available in radial cable exit and axial termination versions. Sensors come with TSC's... Read More
RectorSeal® Wins Product Design Award for AC Leak Freeze PRO, the Refrigerant Leak Sealant ApplicatorJul 25, 2017
AC Leak Freeze® Pro with Magic Frost wins a silver Dealer Design Award sponsored by Air Conditioning Heating & Refrigeration News Magazine.
Houston--RectorSeal® LLC, a manufacturer of quality HVAC/R products, won a Silver product design award July 24 for its AC Leak Freeze® PRO with Magic Frost refrigerant leak sealant in the 14th annual Dealer Design Awards (DDA) Program’s... Read More
Combined Focal Range and Performance of Earlier Model MK Zooms Prompt Split Decision from Independent Production House
Wayne, N.J., July 24, 2017 – The Optical Devices Division of FUJIFILM has announced the first North American customer of its recently released FUJINON MK50-135mm T2.9 zoom. Toronto-based Stature Films, best known for its commercial and documentary production, was an... Read More
Brainchild Monitors Storage Unit Temperature and More!
Increasingly the CDC, the Joint Commission, and other healthcare authorities are placing more stringent guidelines on vaccine storage and temperature monitoring. As a result, hospitals, clinics and pharmacies are turning to paperless chart recorders as an easy way to manage their product temperature data. Brainchild Digital Chart... Read More
Don't miss the latest news!
Receive industry and products news from the market categories that matter to you most.
R220.88 Face Milling Cutter is compatible with SNMU inserts which are fastened with center lock screw. Unit is designed for roughing and semi-finishing applications. Product’s body is made of Idun material and offered in diameters ranging from 2.00 in. to 6.00 in. with size 12 insert and 3.00 in. to 6.00 in. with size 16 insert. Equipped with wiper flat, cutter’s body offers 88-degree lead... Read More
induSENSOR MSC7401 Controller are designed for enabling the operation of LVDT and LDR gages and displacement sensors. The unit is equipped with current and voltage output. Used in automated processes, quality assurance, test rigs and in pneumatic cylinders, controller’s displacement sensors can measure and monitor movements, displacements, positions, strokes, deflections and dislocations.Read More
The Li’l Trackless Fillet Runner Welding Carriage is equipped with 14.4 V lithium ion battery and used in applications where line voltage is not available. The unit offers constant and non-stop travel and is 8 kg in weight. Delivering consistent and repeatable travel speeds for producing specified weld geometries, carriage decreases metal usage up to 60%.Read More
Suitable for Ethernet applications that require speeds up to 1 Gb/s, the Cat5e AWM 600V Ethernet Cable comes with teal color, foil and braid shielding (shielding 100% Foil + 85% Braid). The cable is available in UL AWM 2570 600V, UL listed Type CMG and UL listed Type PLTC models. The product is designed with 22/7 strand and smaller OD for making field wiring IDC connectors simple and unit... Read More
36 W Power Metal Strip® Battery Shunt Resistor delivers resistance values of 50 µΩ, 100 µΩ, and 125 µΩ and is operated in the temperature range of -65 °C to +170 °C. Unit provides inductance values of < 5 nH and low thermal EMF up to < 1 µV/°C. Equipped with three sense pins, WSBS8518...40 is suitable for gas, diesel, hybrid, electric car, trucks, electric forklifts and UPS... Read More
SCS R3 Series Dissipative Rubber Worksurface Mat is available in rolls and mat kits. Compatible with workstation monitors, unit is resistant to solvents, hot solder and soldering irons. Table mat is offered in 24 in. x 48 in. size whereas roll mat kit comes in 24 in. x 50 ft, 30 in. x 50 ft, 36 in. x 50 ft, 48 in. x 50 ft size. Both products come in light blue, gray and green colors.... Read More
Great Lakes Brewing Company Quenches Increased Demand with Manufacturing Analytics Solution from Rockwell AutomationJul 25, 2017
MILWAUKEE - Craft beer is booming business in the United States, and even seasoned breweries are finding themselves looking for creative ways to keep up with thirsty consumers. Cleveland-based Great Lakes Brewing Company (GLBC), an independent craft brewery founded in 1988, recently tapped into new manufacturing analytics technology that helps scale production without sacrificing product... Read More
OAK BROOK, Ill., July 24, 2017 - TricorBraun Design & Engineering Group today announced that Collin Akemann has joined the company as Industrial Designer. He reports to Industrial Design Manager Samantha Juna and is based in Oak Brook, Illinois.
In this role, Akemann designs and develops custom rigid packaging solutions for TricorBraun's consumer packaged goods (CPG) brand owners... Read More
Earlier this summer, Case Mason leadership and members of Case Mason’s dedicated subscription box team attended the 2017 Subscription Summit in Austin, Texas. According to its website, the Subscription Summit “connects today’s leaders, innovators and partners that are driving the rapid evolution of how customers discover, buy and experience new products.” As the strategic 3PL partner... Read More
MicroE Veratus™ Series Encoders utilize VeraPath™ technology and feature mounting configurations, index selection, analog and digital incremental encoder outputs. Units come with A-quad-B or 1Vpp sin/cos interface options. Product is compatible with MicroE’s linear glass scales, linear metal tape and rotary scales. Encoder’s sensor head comes in 35 x 13.5 x 10 mm dimensions and... Read More
Compatible with MicroE’s linear glass scales, linear metal tape and rotary scales, MicroE Optira™ Series Encoders are embedded with A-quad-B or 1Vpp sin/cos interface options. Unit’s sensor head measures 11.4 x 13 x 3.7 mm and is available in 3.3 VDC version. Products use PurePrecision™ optical technology. Encoder’s sensor head comes with two mounting options and a FFC connector.Read More
Ideally suited for scanning, pointing, measuring and cutting applications that require extremely smooth velocity control and highly accurate positioning, the Agility Series delivers best-in-class torque ripple and zero cogging.
Engineered with ZeroCog™ slotless motor technology from Applimotion, the effects of cogging torque, magnetic forces, flux harmonics and phase balance and... Read More