Receive industry and products news from the market categories that matter to you most.
Stay up to date on industry news and trends, product announcements and the latest innovations.
Offered in 9/16 in. wide x 5/16 in. high, INFINA™ ACX AC LED Linear Strips can be mounted in snap-in 3 ft channel or with mounting clips in dry, damp and wet locations. Units are made from thermoplastic polyurethane material and operated from 120 line voltage. Products come with run length of 100 ft and color choice of red and blue. LED Strips are equipped with thermoplastic jacket.... Read More
P1157E-500 Touch Panel PC features one PCIe x4 or one PCI slot. Integrated with aluminum front bezel, unit is designed with three RS-232 ports, one RS-232/422/485 port, four USB 3.0 ports and two Gigabit LAN. Product comes with 7th generation Intel® Core™ i7/i5/i3, Celeron® and Pentium® processor options and supports dual DDR4-2133 Long-DIMM sockets. P1157E-500 is equipped with built-in... Read More
Suitable for motor sport vehicles, automotive testing, solar cell positioners, wind turbine prop pitch and brake position applications, ILPS-19 Series Inductive Linear Position Sensors are offered in six ranges from 25 to 200 mm. Units come in 19 mm diameter anodized aluminum housing. Product is available in radial cable exit and axial termination versions. Sensors come with TSC's... Read More
R220.88 Face Milling Cutter is compatible with SNMU inserts which are fastened with center lock screw. Unit is designed for roughing and semi-finishing applications. Product’s body is made of Idun material and offered in diameters ranging from 2.00 in. to 6.00 in. with size 12 insert and 3.00 in. to 6.00 in. with size 16 insert. Equipped with wiper flat, cutter’s body offers 88-degree lead... Read More
36 W Power Metal Strip® Battery Shunt Resistor delivers resistance values of 50 µΩ, 100 µΩ, and 125 µΩ and is operated in the temperature range of -65 °C to +170 °C. Unit provides inductance values of < 5 nH and low thermal EMF up to < 1 µV/°C. Equipped with three sense pins, WSBS8518...40 is suitable for gas, diesel, hybrid, electric car, trucks, electric forklifts and UPS... Read More
SCS R3 Series Dissipative Rubber Worksurface Mat is available in rolls and mat kits. Compatible with workstation monitors, unit is resistant to solvents, hot solder and soldering irons. Table mat is offered in 24 in. x 48 in. size whereas roll mat kit comes in 24 in. x 50 ft, 30 in. x 50 ft, 36 in. x 50 ft, 48 in. x 50 ft size. Both products come in light blue, gray and green colors.... Read More
Great Lakes Brewing Company Quenches Increased Demand with Manufacturing Analytics Solution from Rockwell AutomationJul 25, 2017
MILWAUKEE - Craft beer is booming business in the United States, and even seasoned breweries are finding themselves looking for creative ways to keep up with thirsty consumers. Cleveland-based Great Lakes Brewing Company (GLBC), an independent craft brewery founded in 1988, recently tapped into new manufacturing analytics technology that helps scale production without sacrificing product... Read More
OAK BROOK, Ill., July 24, 2017 - TricorBraun Design & Engineering Group today announced that Collin Akemann has joined the company as Industrial Designer. He reports to Industrial Design Manager Samantha Juna and is based in Oak Brook, Illinois.
In this role, Akemann designs and develops custom rigid packaging solutions for TricorBraun's consumer packaged goods (CPG) brand owners... Read More
Don't miss the latest news!
Receive industry and products news from the market categories that matter to you most.
Earlier this summer, Case Mason leadership and members of Case Mason’s dedicated subscription box team attended the 2017 Subscription Summit in Austin, Texas. According to its website, the Subscription Summit “connects today’s leaders, innovators and partners that are driving the rapid evolution of how customers discover, buy and experience new products.” As the strategic 3PL partner... Read More
MicroE Veratus™ Series Encoders utilize VeraPath™ technology and feature mounting configurations, index selection, analog and digital incremental encoder outputs. Units come with A-quad-B or 1Vpp sin/cos interface options. Product is compatible with MicroE’s linear glass scales, linear metal tape and rotary scales. Encoder’s sensor head comes in 35 x 13.5 x 10 mm dimensions and... Read More
Compatible with MicroE’s linear glass scales, linear metal tape and rotary scales, MicroE Optira™ Series Encoders are embedded with A-quad-B or 1Vpp sin/cos interface options. Unit’s sensor head measures 11.4 x 13 x 3.7 mm and is available in 3.3 VDC version. Products use PurePrecision™ optical technology. Encoder’s sensor head comes with two mounting options and a FFC connector.Read More
EFM32GG11 Giant Gecko Microcontrollers are available in QFN, QFP and BGA options. These units are designed with an internal memory with up to 2 MB flash and 512 KB RAM. Offering SD/MMC and Octal/Quad-SPI memory interfacing, units consume 77 μA/MHz and 1.6 μA of power in active and deep sleep mode respectively. MCUs feature TFT display, a current-based capacitive sense engine and crystal-free... Read More
American-Newlong, Inc. will be exhibiting at PACK EXPO International in the Upper South Hall in Booth No. S-7615. American-Newlong will be displaying its EC-201 robotic palletizing machine, A1-PB sewing stand with DS-9C filled bag closing head and an NP-7A portable bag closer. PACK EXPO will be held in Las Vegas, NV at the Las Vegas Convention Center from September 25 – 26, 2017.... Read More
Available in pillar, half round, round, three-square and needle configurations, Swiss Pattern CORINOX Machinist Files come with 70 Hrc. Designed for use on stainless steels and exotic alloys, units feature coated surface. Offering quicker wear resistance, needle files come in 7 in. length whereas hand files are available with 6 in. length. Units are suitable for use in tool and die making,... Read More
Available in KMD-50 and KMD-60 models, Electromechanical Actuators are suitable for pressing, metal and thermo-forming applications. Featuring ball screw technology, units come with front flange or rear flange mounting. Offering internal anti-rotation operation, product’s mount rod comes in up, down or horizontal types. KMD-50 actuators weigh 49.9 kg and offer side load capacity of 4.45 KN.... Read More
Guill Tool Appoints New Quality Engineer Extrusion Tooling Leader Strengthens Resources as it Expands GloballyJul 24, 2017
West Warwick, RI: Rhode Island-based Guill Tool & Engineering Company (www.guill.com) announced today that Amandio Bartolo has joined the company to support its growing extrusion and defense divisions. Amandio brings more than thirty years of experience in quality assurance to Guill.
While spending the last 8 years at General Cable, Amandio minimized... Read More
Monroe Electronics Will Provide FEMA With Broad Range of Expertise in Emergency Information Distribution
LYNDONVILLE, N.Y. - July 20, 2017 - Monroe Electronics, a leading provider of emergency information solutions for cable, IPTV, broadcast, government, and university users, today announced that Senior Director for Strategic and Government Affairs Edward Czarnecki has been appointed to... Read More
Lenthor Engineering, a California Based Designer, Manufacturer and Assembler of Flex and Rigid-Flex Printed Circuit Boards Invests in Hakuto’s Mach630NP Next-Gen Dry Film Laminator from Matrix USAJul 24, 2017
The Mach630NP was designed by Hakuto to solve yield issues stemming from the ever-growing expectations for smaller tolerances below 5 MIL. Other benefits of the machine include ease of use and low-cost maintenance, as well as quick change of rollers and offline cassette loading to maximize the overall use of time.
Lenthor’s General Manager Rich Clemente states, “We are excited about... Read More
LEE'S SUMMIT, Mo., July 20, 2017 - When R&D/Leverage began building tooling for the injection blow mold (IBM) market, they found a unique opportunity to make dramatic improvements to the traditional design of injection blow tools
"The reason we became so interested in improving the IBM tooling is that when we got into the IBM tooling business we recognized there were many problems... Read More
Measuring water quality easier and quicker, ECOTestr™ CTS and pH2+ Testers feature lanyard attachment and keypad. Housed in IP67-rated package which is dustproof and waterproof, units offer automatic temperature compensation. Equipped with 4-digital dual-line display, products are suitable for agriculture, aquaculture, cooling towers, education, printing and water treatment applications.... Read More