Metallized Carbon Corp.
Ossining, NY 10562
Nov 19, 2009 Manufactured to specifications using carbon-graphite materials, Metcar Mechanical Seal Primary Rings and Seal Faces come in antimony impregnated grades, which offer self-lubricating properties and are suited for running in volatile hydrocarbons. Nickel chrome impregnated grades are suitable for high pressure, liquid lubricated, lift off seals. Offering dimensional tolerances as close as 0.0005 in., seal rings can be lapped and polished to 1 Helium light band flatness.

Rite-Hite Corp.
Milwaukee, WI 53224
Oct 14, 2009 With optimized head pad and head curtain designs, PLATINUM(TM) Series withstands abuses delivered by backing trailers. Headers have outer reinforcing of friction-resistant DURATHON(TM) fabric, which protects against extreme wear and tear. Double-reinforced corner-wear boots cover ends of header and upper side pads to protect areas most prone to damage. Consisting of triple-layer, reinforced foil technology, FIREFIGHTER(TM) heat-dissipation protection prevents heat buildup from trailer marker lights.

EagleBurgmann Industries
Houston, TX 77040
Aug 25, 2009 Bi-directional double Cartex® GSDN gas seals can be installed to standardize new centrifugal pumps at chemical plants and refineries or recondition existing pumps. Using HR principle as characteristic design feature, seals produce self-cleaning effect that prevents contamination and increases operational reliability. Width of sliding faces ensure gas film stability, while silicon carbide face materials and DLC coating ensure optimal performance in continuous operation.

American Casting & Manufacturing Corp.
Plainview, NY 11803
Aug 24, 2009 Designed for use with wire, self-locking Model PSW97 is supplied with lettering and numbering and is suited for meters, tanks, drums, containers, and every sealing application. Unit is made of styrene or acetyl plastic with stainless steel locking plunger. Available with cut wires or spools of wire, Model PSW97 offers environmentally safe alternative to lead seals.

Interstate Specialty Products
Sutton, MA 01590
Aug 20, 2009 Made from perfluoroelastomer, Viton®, neoprene, nitrile, EPDM, solid and cellular urethane or silicone, and santoprene, custom fabricated O-rings can be spliced, vulcanized, and supplied in sizes from 1/32 - 48 in. I.D. with 1/16 - ¼ in. cross sections, depending upon material and construction. They are available in hardness from supersoft to 90 Durometer. Applications include wide range of pumps, valves, compressors, and devices used in medical instruments.

PIRTEK USA
Rockledge, FL 32955
Jul 09, 2009 Specifically designed to provide O-rings for popular hose fittings and adapters, ORK-C4 Kits consist of carrying case, 4 separate product boxes with PIRTEK branding, and description of contents in each box. O-rings are suitable for S.A.E. flanges, flat face O.R.F.S., and O-ring boss male fittings.

Trelleborg Sealing Solutions
Fort Wayne, IN 46801
Jul 07, 2009 Developed for oil and gas applications, XploR(TM) range of explosive decompression resistant materials includes compounds in HNBR, FKM, and Isolast® Perfluoroelastomer (FFKM), each of which demonstrates explosive decompression resistance. Materials in XploR(TM) range satisfy NORSOK M-710 sour service and Rapid Gas Decompression test conditions. They are available in standard international o-ring sizes and cross sections, along with custom-engineered solutions and seal designed profiles.

American Casting & Manufacturing Corp.
Plainview, NY 11803
Jun 10, 2009 Available in 15 in. lengths for larger bundling and security applications, BT4S Series is manufactured in printed and numbered designs. All nylon cable ties come with steel locking tooth for added strength. Applications include meters, chemical shipments, crash carts, switches, tote boxes, and air cargo containers as well as fiber drums, lockers, hatches, and trailers.

Trelleborg Sealing Solutions
Fort Wayne, IN 46801
May 26, 2009 Mechanical Face Seals are engineered for rotating applications in demanding environments, where they withstand severe wear and prevent ingress of harsh and abrasive external media. Available with metal parts in cast iron or bearing steel, parts consist of 2 identical metal sealing rings mounted in 2 separate housings face-to-face on lapped seal face. Cast iron will operate in speeds up to 10 fps with oil lubrication, while bearing steel accommodates rotational speeds up to 7.2 fps.

American Casting & Manufacturing Corp.
Plainview, NY 11803
May 14, 2009 Available in Poly TekTiv with adjustable nylon security strap, Car Seal Model 4001 can be supplied in standard and custom fluorescent and neon colors and may be printed and numbered. Nylon straps, typically from 7-30 in., feature steel locking tooth for added strength and adjust to fit any enclosure. These printed cable ties service shipping and transportation industries, including truck, railroad, marine and cargo handling, and air cargo.

PIRTEK USA
Rockledge, FL 32955
May 11, 2009 Suited for hydraulic flanges, flange seals provide resistance to extrusion and compression set over temperatures from -40 to +230°F and pressure rating of up to 6,000 psi. They are designed to fit SAE standard location groove on underside of flange and, with custom manufactured rectangular cross-section, are sized to fit within flage machined housing. Seals are available in 6 standard sizes to fit flanges from ½-2 in.

Woodex Bearing Co., Inc.
Georgetown, ME 04548-3509
May 08, 2009 HB Model seals are offered in 5 CEMA and 7 metric shaft sizes from 1½-3 7/16 in. and from 40-90 mm. They are designed to perform in typical operating conditions associated with screw conveyors or scrolls in food-grade applications, at temperatures up to 500ºF, with abrasive products, and on vertical or inclined conveyors. HB accommodates up to ¼ in. of shaft run-out.

Metallurgical High Vacuum Corp.
Fennville, MI 49408
Apr 27, 2009 Designed to resolve seal issues on Roots(TM) 6 in. blowers, Shaft Seal Kits replace original lip-type seals with mechanical shaft seals, which last longer and stand up to rugged operating conditions. In addition, seals can be replaced without draining oil or removing housing end plate. Large sight glass gives visibility to oil levels and eliminates dipstick on Roots blowers.

American Casting & Manufacturing Corp.
Plainview, NY 11803
Mar 25, 2009 Available bar-coded and laser-engraved, Model FCL-3-H is flexible core, high-security, tamper-evident seal designed to fit on any container, truck, or trailer door hasp. These keyless, self-locking, single-use bolt locks offer no-tool application and must be removed via bolt cutters. Cylinder is made of metal with non-flammable PC shock-proof plastic cover, and anti-spin feature prevents friction attacks. C-TPAT ISO/PAS 17712 compliant seals meet US Custom and Border requirements.

Timken Co., The
Canton, OH 44706 0932
Mar 10, 2009 Designed to minimize friction as well as installation effort, Outrunner® Standard and Outrunner PH (Performance Hybrid) seals feature lip material compatible with mineral, synthetic, and semi-fluid greases. Outrunner PH has hybrid metal and rubber OD, which compensates for minor bore imperfections and helps eliminate seal misalignment. Interlock labyrinth seal design, which offers dust- and leak-prohibiting protection, lends to extended bearing uptime and maintenance intervals.

Trelleborg Sealing Solutions
Fort Wayne, IN 46801
Mar 06, 2009 Suited for fitting into standard O-Ring grooves or dynamic applications with limited space, Turcon® Roto VL Seal® is intended for constant service in situations where there are rotary, swiveling, or helical movements at medium to high system pressure. This L-shaped Turcon seal, energized by static O-Ring, has non-symmetric, single-acting design that accommodates velocity to 6.5 ft/sec and pressures to 4,350 psi (5,800 psi for short durations or when static).

Device Technologies, Inc.
Southborough, MA 01772-1033
Feb 24, 2009 Enclosure and Door Seal protects critical electronic equipment from damaging environmental conditions such as dust, moisture, temperatures, and noise. It consists of profile shapes and sizes manufactured from stainless steel substrate and wire or segmented clip which snaps-on instantly to panel thickness from 0.74-19.1 mm, and locks into place without adhesives. Product suits rail, aviation, avionics, automotive, military vehicles, telecom, and construction industries.

American Casting & Manufacturing Corp.
Plainview, NY 11803
Feb 17, 2009 Designed for all closures larger than 5/64 in., Fast-Seal Model 7001 is constructed of welded polypropylene with brass locking insert and up to 3 lines for printing. Thumb and forefinger squeeze hasp into locking chamber with pullback to ensure lock is engaged for tamper-evident security. Seal is suitable for coin box, drum, meter, and utilities applications.

James Walker Group Ltd
Houston, TX 77060
Jan 07, 2009 Made from Elast-O-Pure® EPDM synthetic rubber, Replacement Dome Seals are rated to USP 30 Class VI classification and formulated for use in pharmaceutical and bioprocessing environments. Compressed air operated valves use inflatable sealing mechanism, which provides pressure-tight seal against dome when in closed position. Available in standard diameters from 50-400 mm, dome seals are suited for controlling flow of bulk materials such as powders, pastes, and granules.

American Casting & Manufacturing Corp.
Plainview, NY 11803
Jan 07, 2009 Offering break strength up to 135 lb, heavy-duty plastic security locks and seal straps, Models 4001 and HS 75, are available in standard, custom, fluorescent, and neon colors. Units offer up to 17 spaces for printing with consecutive numbers up to 7 digits. Seals are used by trucking, air freight, and shipping industries for tanks, containers, totes, and all high-security shipment applications.