Other

Fluid & Gas Flow Equipment

Above-Grade Pump Stations are designed for extended service.

February 16, 2016

EVERLAST™ Wet Well Mounted Pump Stations feature enclosures and package options that promote extended service life. Being housed outside of and above wet well facilitates safer maintenance. In addition to DURO-LAST® stainless steel baseplate, features include QUICKSMART™ touchscreen station controls, X-PELLER® non-clog impeller, and RapidJack™ quick-clean check valve. Supplemental packages support diverse array of challenging applications. Read More

Fluid & Gas Flow Equipment

Sealed 4-Ball Lower minimizes maintenance, downtime concerns.

February 15, 2016

Compatible with Graco® circulation pumps, Sealed 4-Ball Lower is designed for extended maintenance cycles and does not require throat seal liquid (TSL™). Use of common components simplifies maintenance and reduces repair part inventory levels. Completely sealed, lower can be used in every pumping application in mix room. Backup seal provides additional security in case of bellow leakage, and rods and cylinders feature Ultralife Series ceramic coating. Read More

Fluid & Gas Flow Equipment, Test & Measuring Instruments

Pump Protection System is cUL, ATEX, and IECEx approved.

February 10, 2016

Using ultrasonic probe to monitor gas inside process fluid as it passes through sealless magnetic drive pump, VapourView provides early warning of incorrect priming, venting, cavitation, or entrained process gas. Warning signal is sent to process operator when ultrasonic probe detects presence of even minute gas levels — as low as 1% per volume. Operating from -40 to 356°F, system includes non-invasive detection sensor, flameproof electronics, onboard data recording, and local visual display. Read More

Fluid & Gas Flow Equipment

Capacity-Optimized Ejector fits existing format.

December 11, 2015

Available in inline, T-design, or aluminum block versions, Value Line VL206 dimensioned to emulate ejector format present in many existing systems while offering improved performance and energy-efficient operation. Vacuum ejection technology is based on ejector cartridges, and flap valve-free design promotes operational reliability even in dirty and dusty environments. Features include integrated push-in fittings or thread connection and feed pressure rating of 0.5 MPa (0.7 MPa max). Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Mechanical Components & Assemblies

Dry Vacuum Pump Accessory reduces power consumption.

October 2, 2015

By attaching to dry vacuum pump exhaust line, ECO-SHOCK ES4A can reduce power consumption of dry vacuum pumps used for frequent pumping down of loading/unloading chambers or that use large amounts of sealed gas. Installation does not incur any degradation of pumping speed, and there is no decrease in performance of dry vacuum pump if ES4A breaks down. This accessory can be used to pump down air, nitrogen, argon, and other stable and safe gases. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Green & Clean

Eliminate Vacuum Related Downtime in Your Production

September 22, 2015

piCOMPACT®23 revolutionizes the air driven vacuum pump market Hingham, MA – piCOMPACT®23 is the latest in a line of Piab vacuum generators that provides outstanding performance and quality. The new design increases uptime in your vacuum system to achieve more reliability.  By working at a lower feed pressure and maximizing the utilization rate of the compressed air, the COAX® ejectors... Read More

Fluid & Gas Flow Equipment, Material Handling & Storage, Materials & Material Processing

LSR Machine offers precision dispensing.

May 20, 2015

Replacing two previous systems, Fluid Automation F4-5 LSR Machine offers precise ratio control for mixing 2-component silicone and 2 additive color streams at .5 to 5% ratios. High-precision dosing system provides greater measurement resolution than previous models, resulting in material savings for end-user. Additionally, machine’s design includes proprietary Graco Control Architecture™ controls and reduced footprint for greater efficiency in floor space. Read More

Fluid & Gas Flow Equipment, Material Handling & Storage

GIW Industries, Inc. Installs Innovative Dredging Package

May 13, 2015

An underwater pump able to dredge 100m below the surface gives dredging company a competitive advantage. GROVETOWN, Ga. – GIW Industries, Inc., the leader in the design, manufacture, and application of heavy duty centrifugal slurry pumps, announces the successful design and installation of a unique underwater pump system for a major Chinese dredging contractor. This equipment package... Read More

Fluid & Gas Flow Equipment, Materials & Material Processing

Mini Tank-Mixing Eductors utilize venturi design.

April 16, 2015

Available with orifice diameters from 0.59–1.18 in., Mini Tank-Mixing Eductor Spray Nozzles enable small pumps to circulate large volumes of tank solution. Color-coded units are constructed of polypropylene and PVDF and can circulate 4–5 times inlet flow. Nozzle flow ranges from 0.31 gpm with circulation rate of 1.9 gpm at 10 psi to 2.9 gpm flow rate with 10.7 circulation rate at 50 psi. Applications include tanks used for plating, cleaning, phosphating, sludge, paint, and anodizing. Read More

Fluid & Gas Flow Equipment

Advanced Pump Appointed New England Distributor for Versa-Matic

April 14, 2015

Advanced Pump is pleased to announce their newest alliance with a major USA manufacturer of pumps in the New England marketplace…..Versa-Matic. Dan Johnston, Vice-President of Global Sales for Versa-Matic, announced the addition of Advanced Pump Co. Inc. as a Factory Authorized Distributor of all Versa-Matic Air-Operated Double Diaphragm (AODD) pumps, pump parts, and accessories as well as... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Material Handling & Storage

Suction Cups and Vacuum Ejectors suit basic applications.

April 9, 2015

Comprising 21 suction cups and 2 small vacuum ejectors, Value Line is suitable for applications where machine speeds and surfaces to be gripped are less challenging. Suction cups, made of TPE-U material for wear resistance, come in flat-concave, bellows, and long bellows shapes with diameters from 0.79–2.95 in. Inline vacuum ejectors can be installed directly on hose very close to point of vacuum and are suitable for applications with vacuum levels of 20–50%. Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment, Material Handling & Storage

Vacuum Ejector features dust proof design.

April 6, 2015

Suited for VGS™ 3010 Vacuum Gripper System, COAX® Di16-2 MINI Cartridge performs well in dusty/dirty environments, such as in packaging where corrugated dust is prevalent. Dust and dirt has free path through ejector nozzles, eliminating risk for clogging—even in extreme applications, such as high humidity in combination with dust. Designed without flap valves, 2-stage cartridge provides vacuum levels down to 70 kPa at feed pressure of 6 bar. Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Vacuum Ejector offers 2 product options.

February 23, 2015

Based on energy-efficient COAX® technology, piCOMPACT® manifold-mounted and functional ejector system is available with M8 6-pin connection option. Threaded connection withstands pull force, making it suitable for moving and vibrating applications, such as robotics. Second option is air valve with cleanroom housing for rooms that have requirements such as ISO 14644. Virtually no air or particles will leak from unit if exhaust air is piped away. Read More

Fluid & Gas Flow Equipment, Materials & Material Processing

National Bronze Mfg. Co. Offers Components for the Pump Industry

November 19, 2014

Roseville, MI — National Bronze Mfg. Co., a leading manufacturer of bronze bushings, bearings, and machined components, is please to introduce a number of bronze components for the pump industry. Pumps are vital to many industrial processes and are designed to operate for many years.  Many of the bronze components in pump assemblies are utilized to reduce maintenance and pump downtime.  ... Read More

Fluid & Gas Flow Equipment, Laboratory and Research Supplies & Equipment, Printing & Duplicating Equipment, Green & Clean

Graham Corporation Expands Power Market Offerings with $3.6 Million in Orders

September 23, 2014

BATAVIA, N.Y. – Graham Corporation (NYSE:GHM), a global business that designs, manufactures and sells critical equipment for the oil refining, petrochemical and power industries, including the supply of components and raw materials to nuclear energy facilities, announced today that it received two new orders from two U.S. nuclear utilities. The orders are for pumping systems and components... Read More

Fluid & Gas Flow Equipment, Machinery & Machining Tools, Material Handling & Storage, Green & Clean

Valveless, Ceramic Pumps for Mining Pilot Plant Hydrometallurgy

September 22, 2014

The V-300 Variable Speed Metering System from Fluid Metering, Inc. (FMI) is the Solution for Drift-Free Fluid Control of lixiviant used in mining pilot plant hydrometallurgy.  Mining Pilot Plants are small scale mining process systems, which generate vital information, which will be, incorporated into the design of larger-scale mining operations. The chemical feed systems used in these pilot... Read More

Fluid & Gas Flow Equipment, Mining, Oil Drilling & Refining

Graham Corporation Awarded $7.5 Million in Orders for Oil Refinery and Petrochemical Projects

September 12, 2014

Custom-Engineered Equipment is Destined for China, Canada and U.S. BATAVIA, N.Y. – Graham Corporation (NYSE:GHM), a global business that designs, manufactures and sells critical equipment for the oil refining, petrochemical and power industries, including the supply of components and raw materials to nuclear energy facilities, announced today that it has secured four new orders totaling... Read More

Fluid & Gas Flow Equipment

Universal Parts for Progressing Cavity Pumps Available Worldwide

September 3, 2014

Universal Parts for progressing cavity pumps are now available worldwide from the Process and Flow Technologies division of NOV. With a company focus on quality products, proven reliability and off-the-shelf availability, the Universal Parts range contains a wide variety of parts suitable for other brands of PC pumps. Universal Parts are manufactured in-house to exacting standards and offer a... Read More

Fluid & Gas Flow Equipment, HVAC

Graham Corporation Awarded $5 Million in Orders

August 27, 2014

• U.S. Oil Refinery Order for New Ejector System • Middle East Liquefied Natural Gas Facility Order to Replace Surface Condensers BATAVIA, N.Y. – Graham Corporation (NYSE:GHM), a global business that designs, manufactures and sells critical equipment for the oil refining, petrochemical and power industries, including the supply of components and raw materials to nuclear energy... Read More

Chemical Processing & Waste Management, Fluid & Gas Flow Equipment

Vacuum Pump targets small parts pick and place applications.

July 8, 2014

Suitable for small centralized systems as well as semi-decentralized systems, piPUMP™ MICRO Ejector features patented COAX® technology, which is based on multi-stage concept for creating vacuum with compressed air. Installation is simplified with push-in connections and common feed for compressed air, regardless of number of units chosen. Capable of operating at low or fluctuating feed pressures of 14–87 psi, piPUMP™ MICRO begins producing vacuum immediately when pressure valve is turned on. Read More