Varian, Inc.
Palo Alto, CA 94304
Aug 12, 2008 Available in benchtop and mobile models, TPS-compact provides plug-and-play, hydrocarbon-free, ultra-high vacuum pumping. Portable, integrated system is powered by Turbo-V 81 MacroTorr(TM) or Turbo-V 301 Navigator(TM) pumps, including control and communications software, and backed by Varian IDP-3 Dry Scroll primary pump with maximum weight of 42.11 lb. System includes display that shows gauge pressure and indicates when tip-seal replacement is needed.

Omega Engineering, Inc.
Stamford, CT 06907
Aug 04, 2008 Suited for petroleum and automotive industries, FPUD500 series of high viscosity drum pumps have ability to empty wide variety of containers in various applications. Pump tube and motor are constructed modularly and supplied separately for maximum flexibility. This series of pump tubes are rated up to 200°F, 15,000 cps viscosity, 1.8 specific gravity, and are available in 316SS or sanitary polished 316SS.

Emerson Process Management
Austin, TX 78754
Aug 01, 2008 Environmentally friendly Dosaodor-D computerized pressure injection system utilizes solenoid injector algorithm to ensure uniform odorant atomization into natural gas in transmission and distribution pipelines. Pressure injection system, with frequent small injections of odorant and wick distribution insert, is accurate over large range of pressures and flow rates. ROC800 series controller enables configuration and operation of system for measurement of data in real time.

Supercritical Fluid Technologies, Inc.
Newark, DE 19711
Jul 31, 2008 Able to pressurize carbon dioxide up to 10,000 psi at flow rates from 0.01-24.0 ml/min, self-contained SFT-10 utilizes dual sapphire syringe pump technology and can perform in standard constant pressure mode as well as optional constant flow mode. Peltier (thermoelectric) technology makes it possible to achieve high pressure without external cooling bath; chiller maintains temperature at pump heads low enough to ensure CO2 remains liquid.

Bosch Rexroth Corp., Industrial Hydraulics Div.
Bethlehem, PA 18017
Jul 31, 2008 Electrohydraulic Flow Matching (EFM) control generates adjusting signals for pump at same time valves are controlled, ensuring adequate flow is made available. Promoting accelerated response to implement hydraulics, solution is operated in open control chain as electro-proportional variable pump. Pressure losses between pump and valve adjust themselves according to operating point.

Viking Pump Inc., A Unit Of IDEX Corp.
Cedar Falls, IA 50613 0008
Jul 25, 2008 Providing 200 psi thin liquid capability at capacities up to 160 gpm, LVP Series is designed for corrosive liquids at high pressures. Pumps feature stainless steel casing surface-hardened to 62 Rockwell C, chrome oxide-coated shaft, silicon carbide bushings, and PEEK® vanes. Units are available in metric-standard design, with DIN flanges, IEC motor mount, and metric-standard shaft seal options, as well as with ANSI flange ports, NEMA motor mount, and inch-standard seals.

EXAIR Corporation
Cincinnati, OH 45249-1621
Jul 22, 2008 Powered by compressed air, E-Vac series is comprised of low-vacuum units up to 21 in. Hg for porous materials and high-vacuum units up to 27 in. Hg for non-porous materials. Vacuum pumps are available in various sizes and flows, and selection of suction cups is available for range of applications. Engineered to minimize air consumption and increase cycle speeds, series has in-line, single stage design that delivers consistent, steady vacuum without fluctuations.

Binks ITW Industrial Finishing
Glendale Heights, IL 60139
Jul 18, 2008 Suited for small and medium wood shops, Binks Comet 4/12(TM) pump is designed with air powered 12:1 two-ball piston pump that is capable of producing 0.4 gpm at 60 cycles/min. Created to apply water-borne and solvent-borne coatings, it can spray wood coatings at fluid outlet pressures from 300-1,200 psi. Available in wall-mount, cart-mount, or tripod-mount outfits, pump features balanced fluid section for steady, even coating flow and hard chrome coated SS pump rod.

Thomas Products Division
Sheboygan, WI 53081
Jul 17, 2008 Rated for max flow of 2.37 cfm, Series 660/680 WOB-L® pumps incorporate wetted aluminum parts treated for corrosion protection and single-phase AC motors of permanent split capacitor design. Oil-less pistons and cylinders, in addition to intake filters, ensure non-contaminated air flow, while SS valves, piston seals, hard-coated aluminum cylinders, and permanently lubricated bearings help extend product life. Pumps provide up to 28.5 in. Hg vacuum or 45 psi pressure.

Viking Pump Inc., A Unit Of IDEX Corp.
Cedar Falls, IA 50613 0008
Jul 17, 2008 Dimensionally interchangeable with Viking Heavy Duty Bracketed packed and sealed pumps, Universal Mag Drive Series facilitates upgrade process. Sealless offering features thrust-controlled design, allowing short-term run-dry capabilities and bi-directional pump operation for application flexibility. Offered in cast iron, steel, and stainless steel, products are suited for use with hazardous, hard-to-seal liquids and offer flow rates to 200 gpm with pressures to 200 psi.

Watson-Marlow Bredel Pumps
Wilmington, MA 01887
Jul 11, 2008 Suited for harsh processing applications, Model 520RE high-pressure chemical metering peristaltic pump offers flows of 55 gph at 30 psi to 7 gph at 100 psi. It covers range of applications including low shear feed for contamination-free transfer of acids, bases, and slurries found in chemical-based industries. With repeatability at 99.5%, self-priming pump can accommodate flow rates from 0.1 µL to 350 gpm, and can withstand pressures up to 232 psi.

Binks ITW Industrial Finishing
Glendale Heights, IL 60139
Jul 07, 2008 Designed for high-flow circulation systems requiring moderate pressure, Exel(TM) pump works with water-borne and solvent-borne fluids, catalyzed coatings, high solids coatings, abrasive materials, and moisture-sensitive materials. Available in three 4:5.1 all-stainless-steel models, it delivers up to 6.85 gpm at 60 cycles/min. Pump features maximum inlet and working pressure of 100 and 450 psi, respectively, and SS wetted fluid chambers with self-priming pistons.

Sauer-Danfoss
Ames, IA 50010
Jul 03, 2008 Utilizing integral electro-hydraulic servo piston assembly to controls rate and direction of hydraulic flow, Model H1 115/130cc is designed for high and medium power mobile machinery that demands steady, instant propulsion and precise control. Closed-circuit, variable displacement, axial piston pump supports next generation engines as industry moves toward Tier 4 emission controls. It is fully PLUS+1(TM) Compliant to interface with company's electronic machine control architecture.

Seepex Inc.
Enon, OH 45323
Jul 01, 2008 MD and BW pumps are available with drive that integrates single reduction gear reducer, 4-pole TEFC, inverter-rated ½ hp electric induction motor, and vector type variable frequency drive in NEMA 4 enclosure. Pump and drive combination, covering performance band of 0.08-4.7 gpm and pressures to 360 psi, operates from 1x120 Vac, 15 A circuits with 5-15p grounded plug. Drive has H-O-A switch with 10-turn potentiometer for manual control and will accept 4-20 mA process signal.

GIW Industries, Inc.
Grovetown, GA 30813
Jun 30, 2008 Along with proprietary impeller vane design and Solid/Fluid Flow Technology, LCC-R pump features double-wall construction with outer ductile-iron casing and inner molded-rubber liners. Thickened shrouds and vanes provide optimal wear resistance in heavier slurries, and impeller hub side clearing vanes are effective in clearing solids. Rubber-lined impeller is interchangeable with existing metal impellers. Hub side clearing vane and flat hub side designs are available.

GIW Industries, Inc.
Grovetown, GA 30813
Jun 30, 2008 Used in hard rock mining, MDX series has low specific speed that provides stable operations by harnessing variable flow conditions confronted in modern mills. Stable flow in combination with optimum head/quantity and efficiency curve ensures efficient mill operation. Also, optimal BEP ensures stable sump level over large flow variations, operational efficiency, and equipment life. Pumps also incorporates slurry diverter technology matched with adjustable suction liner design.

CAT PUMPS
Minneapolis, MN 55449
Jun 25, 2008 Capable of delivering 10 gpm, 7CP6110BH103 and 7CP6110BH153 are 10 and 15 hp single-extended shaft motor-pumps, respectively, that operate at pressures to 1,460 and 2,000 psi. Products mount onto motor using bell housing and flexible coupling and are constructed with forged brass manifold and STG V-Packings. Dipstick is included for checking oil level. Applications include coolant flushing systems, dual gun prep units, and multi-gun truck wash systems.

Bosch Rexroth Corp., Industrial Hydraulics Div.
Bethlehem, PA 18017
Jun 17, 2008 With 6,500 bar nominal pressure and 9 nominal parameters that counteract reduced speed of diesel engine, A4VG variable pump with swashplate design lowers emissions for travel drives used in mobile equipment. Pump case provides manufacturers with ways to include sensors for monitoring swivel angle, high pressure, and rotational speed. Bowl-shaped design avoids high-pressure transitions at sealing points, while high-pressure ports help optimize arrangement of hydraulic lines.

Sta-Warm Electric Co.
Ravenna, OH 44266
Jun 12, 2008 With heating element wrapped around outer surface, Heated Transfer Pump provides uniform heat to inner portion of pump to prevent cooling of temperature-sensitive materials conveyed through gravity fed transfer lines. Unit has max operating temperature of 375°F and can transfer tar, wax, glue, and potting compounds. Pumps operate in 120, 240, or 480 V systems, have output of 1-50 gpm at 100 psi max, and are available in bronze, cast iron, or stainless steel.

EXAIR Corporation
Cincinnati, OH 45249-1621
Jun 10, 2008 Utilizing SS 2-way pump that is suited for use with most non-flammable liquids, Mini Reversible Drum Vac System can vacuum coolant, hydraulic oils, spills, sludge, tramp oil, and waste water; then pump it back out for disposal, storage, or reclamation. Compressed air powered unit has no moving parts such as motors or impellers to clog, freeze up, or wear out. With air consumption of 19 scfm at 80 psig, it features automatic safety shut-off valve to prevent overfilling.