NLB Corporation
Wixom, MI 48393 2824
Oct 30, 2009 Respectively suited for applications requiring water pressures up to 24,000 and 15,000 psi, Typhoon(TM) 24-10 and 24-15 rotating water jet nozzles clean pipes as small as 5/8 in. dia with efficient water usage. Rotating action comes from nozzle, focusing force up front for optimal effectiveness, and integral seal limits leakage, which is distributed at both ends to equalize nozzle wear. Self-propelling nozzles rotate at up to 7,000 rpm with max flow of 10 gpm.

Tideflex Technologies
Carnegie, PA 15106
Oct 29, 2009 Constructed entirely of rubber, with enhanced sealing to improve headloss across valve, TF-1 Curved Bill Tideflex® Check Valve is immune to rust, corrosion, and weathering. It can also handle long-term water weight and maintain structural integrity. Vertical angle of spine enables valve to withstand cantilever effect when water is flowing through it.

HASCO Hasenclever GmbH + Co KG
Ludenscheid D-58513  Germany
Oct 23, 2009 Multimodule Z3280/.../S combines 2-6 modified Compact Shot nozzles Z3210/... in modular design that enables work with extended cavity-to-cavity distances as well as flexible gating point arrangement. It may also be used individually as central nozzle or in combination with hot runner. Latter facilitates building of manifold molds due to possibility of grouping cavities together in clusters. Solution also enables multi-point gating on one article.

PneuMagnetic, LLC
Quakertown, PA 18951
Oct 23, 2009 Featuring self-contained, pneumatic magnetic design, PneuMagnetic Solenoid Valve Actuator can be used as drop-in replacement for OEM coil on direct acting solenoid valves, and provides same on/off magnetic field as original coil. No field wiring, conduit, or intrinsically safe barriers and no electricity at valve are required. Actuator is fully compatible with any original hermetically sealed valve.

McQuay International
Minneapolis, MN 55440
Oct 22, 2009 Designed for in-room installation, Enfinity(TM) Pumps exceed ASHRAE 90.1 efficiency standard to minimize energy consumption and are selectable for standard, boiler/tower, or geothermal applications. Pumps use R-410A refrigerant, which has zero ozone-depletion potential and no phase-out date. Offered in low-sill or high-sill design, pumps are equipped with MicroTech® III unit controller and GentleFlo(TM) cross-tangential fan wheel, which delivers max airflow required for proper air circulation.

KNF Neuberger, Inc.
Trenton, NJ 08691-1810
Oct 21, 2009 Including compact 3.3 Lpm micro pump and 25 Lpm mid-size version, both with vacuum or pressure capabilities, swing-piston pumps can transfer, evacuate, or compress air or inert gas, while delivering oil-free performance without any potential risk of contamination. Sealing lip between cylinder and wall minimizes frictional loss and ensures minimal vibration. Suited for wide range of OEM applications, pumps can operate in any position and can be customized to meet specific requirements.

Asahi/America
Malden, MA 02148
Oct 15, 2009 Available in 1¼ x 1¼ in. and 1½ x 1½ in. sizes, Type-343 Zero Dead Leg 3-Way Valves come in 45+ configurations for Purad PVDF, PolyPure PP-natural, and PP-Pure pigmented PP. Pigmented and natural polypropylene T-343 valves are available in 12 configurations each, which include ¾ x ¾ in. and ¾ x ½ in. sizes, and Purad PVDF valves operate up to 285°F. Valves are suited for use with aggressive chemical as well as high-purity applications.

Jet Edge
St. Michael, MN 55376
Oct 14, 2009 Capable of producing 2.0 gpm of ultra-high pressure, iP60-100, 100 hp, 60,000 psi pump suits precision waterjet cutting, water blasting, cleaning, and surface preparation applications. It features tie-rod design with no threaded cylinder, no threaded end caps, and no threaded hydraulic cylinder. Product features matched-metal components to prevent galling of hydraulic system components, and dual intensifiers for increased operating performance.

Colfax Corp.
Richmond, VA 23235
Oct 13, 2009 As rotary positive displacement pump with constant and nonpulsating flow, Imo® 8L-912Y helps accommodate movement of heavy crude from onshore and offshore oilfields to downstream operations. It accommodates up to 24 in. dia pipelines and can transport over 85,000 barrels of oil per day at pressures to 2,000 lb/in.². Hydraulic nature provides volumetric and overall operating efficiencies, and performance can be controlled via variable-speed drive to dial in required flow rate.

Thomas Products Division
Sheboygan, WI 53081
Oct 12, 2009 Featuring REFLEX valve technology, 1210 Series is suited for fuel cell, inkjet, and diagnostic applications. Unit features max flow of 180 ml/min, max pressure of 80 m H₂O, and max vacuum of 6 m H₂O. Available in 12 and 24 V DC models, compact pump measures just 2.0 x 0.9 x 1.4 in. and is able to handle mixture of air and liquid.

Harvard Apparatus, Inc.
Holliston, MA 01746 1371
Oct 09, 2009 Offered with variety of syringe racks to meet specific application needs, PHD 22/2000 Advanced Syringe Pumps are available in infusion-only, infusion/withdrawal, or programmable pumping options. Programmable pump can store up to 4 programs of 10 sequences each.

Tridak
Torrington, CT 06790
Oct 09, 2009 Tridak Model 785 poppet valve is designed to dispense adhesives, silicones, greases, and filled materials. Stroke adjustment and control offer precise adjustment of fluid deposit volume and flow. Dispensed material is shut-off cleanly at end of each cycle.

Parker Hannifin Corp.
Cleveland, OH 44124-4141
Oct 08, 2009 Optimized for open-circuit applications, 18 and 28 cc P1/PD Series piston pumps enhance hydraulic fan drive system performance, which can subsequently help reduce fuel consumption and emissions output for off-highway vehicles. Each variable, axial piston pump is engineered for continuous operation at temperatures and pressures (280 bar max) in emissions-compliant diesels. Suited for medium-duty mobile (P1) and industrial (PD) applications, pumps are available with several control options.

Flexicon Corporation
Bethlehem, PA 18020 8006
Oct 07, 2009 Designed to loosen bulk solid material that has solidified during storage and shipment, Bulk Bag Weigh Batch Eductor System discharges material by weight and blends it into liquid stream. Skid-mounted system incorporates 2 Bulk Bag Unloading Frames, each with integral Bulk Bag Conditioner comprised of hydraulic pump and 2 rams with contoured end plates that press opposing sides of bulk bags. Cantilevered hoists and motorized trolleys allow conditioning of bulk bags at various heights.

Secoa Technology
Dalton, GA 30721
Oct 05, 2009 Secoa technology processes untreated welding nozzles supplied by customers and transforms them into PerfectArcs(TM) nozzles with extended life design to minimize nozzle cleaning time for any manual or robotic MIG welding process. Self-cleaning PerfectArcs(TM) nozzles eliminate need for labor-intensive spatter release sprays and dips. Products shed spatter, permitting shielding gas to flow properly and ensuring proper, clean welds.

KD Scientific Inc.
Holliston, MA 01746
Oct 02, 2009 Used for infusions from 0.1-300 ml/hr with 2.5% accuracy, KDS EZflow 2010 meets CE 0197 directive and complies with EC directive 93/42 EEC, Annex II, Article 3. LED display, which shows flow rate in ml/hr, can be toggled to show total volume delivered in ml. Rapid delivery key lets user eliminate dead volume and eliminate excess air in tubing prior to delivery of fluids. Visual and audible alarms are provided for occlusion detection, low battery, near end of dispense, and complete.

Air-Vac Engineering
Seymour, CT 06483
Oct 02, 2009 Measuring 7/8 x 1 7/8 x 6 ½ in., MFL Series is capable of vacuum flow up to 19.5 scfm and vacuum levels up to 27.2 in. Hg. Compressed air flows through small venturi nozzle and expands into first chamber to generate vacuum. Combination of compressed air and vacuum flow then flows through second and third venturi to also produce vacuum. Pumps are suited for pick and place applications, with vacuum cups for material handling where sealing is difficult and leakage is common due to uneven surfaces.

AKO Armaturen & Separations GmbH
Trebur-Astheim   Germany
Oct 02, 2009 Available in nominal diameters DN040-DN150, VA series is made with flange connection conforming to DIN EN 1092 (PN10/16) as standard. Body and flanges of lightweight valve are made in stainless steel AISI 1.4404 and are electro-polished. Valve design enables sleeve to be changed quickly without need for special tools and adhesives.

Fluid Metering, Inc. (FMI)
Syosset, NY 11791
Sep 30, 2009 Based on valveless piston technology, Caustic Soda Injection Pump utilizes single rotating and reciprocating ceramic piston to accomplish both pumping and valving functions, eliminating need for check valves and associated maintenance. Sapphire-hard internal ceramics insure that there is no degradation in accuracy over time and no need to recalibrate. Measuring 10 x 5 x 5 in., pump operates on less than 100 W of power and can be wall mounted.

Thomas Products Division
Sheboygan, WI 53081
Sep 29, 2009 Weighing 0.4 lb, 1410 Series supports range of motor options and design configurations to meet life requirements and specifications of application at hand. Miniature products feature EMC suppression qualified to EN55011-B on some designs. Max flow is 4.3 lpm, with max pressure of 27.5 psig and max vacuum of 22.0 in. Hg.