Poppet Valves

Fluid & Gas Flow Equipment

Media Separation Valves handle aggressive liquids and gases.

May 24, 2016

Featuring 2-port design, 300 and 350 Series iDP Valves are constructed of material suitable for bodily fluids, aggressive chemicals and cleaners, and elevated liquid temperatures. Flexing diaphragm-poppet isolates media from solenoid, within inert body material, ensuring long life and sustained performance. Typical markets and applications include: clinical diagnostics, analytical chemistry, agent detection, environmental monitoring, food and beverage, and gaseous flow control. Read More

Fluid & Gas Flow Equipment

Check Valves work with VFD-controlled submersible pumps.

August 28, 2015

<div> Featuring unleaded bronze body with corrosion-resistant internal parts, 1 in. Models 100E VFD and 100ES VFD are designed to minimize flow losses and hydraulic shocks in pumping system. Both inlet and outlet threaded area allow for longer pipe threads, while guided poppet system (optional SS poppet) ensures that valves automatically adjust noiselessly from high to very low flow rates. Valves can be installed in either horizontal or vertical piping installations.</div> Read More

Fluid & Gas Flow Equipment

Solenoid Valve offers single-acting cylinder control.

December 2, 2014

Combining functions of solenoid valve, check valve, and orifice into one unit, Model SVP08-NCF has rated pressure of 3,300 psi and rated flow of 4 gpm. Normally closed, pilot-operated, poppet-type 08-size valve provides flow control when energized. To prevent contamination coming from cylinder, optional 300 µm filter protects valve from port 2. If electrical power is down, operator can switch valve position manually. Optional threaded pin allows pull override via wire cable or knob handle. Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Electronic Poppet Valves suit high flow applications.

July 1, 2014

Available in 1/8 in. NPT ported and manifold mount, EGV Series includes 10 and 15 mm models suited for large flow, low leak applications. Two- and 3-way, electronically piloted valves feature electroless nickel-plated brass and hard coat anodized aluminum construction for long life and corrosion resistance. Externally piloted option is available for controlling lower pressures or other media. Variety of control voltages and connections are available. Read More

Fluid & Gas Flow Equipment

Rugged Cartridge Valve offers extended service life and uptime.

April 29, 2014

Available in 14 mm NC or NO spring return construction, 3/2 Valve Block Cartridge valve for I/S glass machines, 21 or 26 valve blocks, withstands glass production environments. Construction includes aircraft grade aluminum outer housings, high-temperature VITON® seals, and high-temperature stainless steel poppets. Other design aspects include optimized through flow, poppet internals, and moving part guidance. Also, valve  integrates pressure booster function with its 2-piston design.<br /> Read More

Fluid & Gas Flow Equipment

High-Flow 2- and 3-Way Poppet Valves include cartridge style.

October 10, 2013

Featuring bubble-tight design, GV series includes 2- and 3-way valves that offers flow rates of 38 scfm @ 50 psig and 67 scfm @ 100 psig. Valves are offered with ¼ in. NPT and 3/8 in. push-quick ports and also come in cartridge mounted version. With 15/32-32 nose thread, design allows various buttons and actuators to be used with stem operated valves. GTV series are toggle valves with panel mounting capabilities, and outlet port on all GV valves can be positioned to any orientation. Read More

Fluid & Gas Flow Equipment

Electronic Valves provide air flow of 1.4 scfm at 100 psig.

March 21, 2013

Interfacing with electric and electronic circuits, Minimatic® Electronic Valves are 2-way Normally Closed control valves with no sliding parts. Complete poppet travel is 0.007 in., minimizing power consumption. Manifold and in-line mounting are available as well as many different electrical connection styles. Oxygen Clean and Analytical versions are also offered as well as FKM, EPR, and Silicone seals and diodes. Flow rates of 1.1 scfm at 50 psig and 0.95 scfm at 25 psig are optional. Read More

Fluid & Gas Flow Equipment

Pressure Relief Valve offers relief pressures to 5,400 psid.

August 27, 2012

Utilizing side inlet flow path to help minimize installation boss size and weight, Hi-Q Pressure Relief Valve is capable of flow rates over 19 gpm. Unit is available in range of cracking pressures from 1,000-5,400 psid. It is designed for nominal pressures up to 5,000 psi and system peak pressures up to 6,750 psi. Read More

Fluid & Gas Flow Equipment

Solenoid Valve features balanced poppet design.

June 12, 2012

Measuring 15 mm with 0.25 Cv flow, 3-port Model 153 provides stable performance regardless of media fluctuations, mild contamination, or porting choices. Balanced poppet design means all internal forces generated by pressurized media are effectively neutralized. Applicable for full pressure range to 125 psi, including vacuum, direct-acting valve is designed and tested for low leak rates of 4 ccm max at 100 psi. Models are available in 2-way or 3-way and normally closed or normally open. Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Sil3 Actuator Control Valves Provide Solutions for Safety Instrumented Systems Builders

May 8, 2012

o Helps process control designers meet IEC 61508 & 61511 safety standards<4444>Grimsby, Ontario, Canada - Midland-ACS announces that a wide range of its actuator control valve products have undergone third-party assessment to the IEC 61508 functional safety standard, and are now certified to support SIL (safety integrity level) 3 capability. Control valves with this high level of safety... Read More

Fluid & Gas Flow Equipment

Pilot-Operated Check Valves feature 0-300 psig pressure range.

April 4, 2012

Featuring poppet design, JPC Series works as standard check valve, but can be opened with air pilot signal to permit free flow in normally checked position. Units are constructed of ENP brass, anodized aluminum, and stainless steel with Buna-N seals. With temperature range of 32-230°F, valves operate with air, water, or oil as medium. Auxiliary port facilitates plumbing, while side port rotates for ease of positioning. Read More

Fluid & Gas Flow Equipment

Spring Biased Shuttle Valve suits high pressure applications.

January 25, 2012

Measuring 0.375 in. in diameter and constructed entirely of stainless steel, Model 375 is suitable for applications with system pressures up to 5,000 psi. Poppet is biased so that emergency port is normally closed, and normal and service ports are connected. For installation flexibility, miniature valve is available with biased port at either end. Read More

Fluid & Gas Flow Equipment

Directional Solenoid Valves feature zero-leak design. .

May 4, 2011

Suited for use with most hydraulic pumps, D03 Series valves maintain pressure for long time periods without replenishing pressure supply. Poppet-style 3- and 4-way directional control valves are solenoid-actuated and operate in applications with pressures up to 5,000 psi where pressure and flow are intermittent. Nominal flow rate is 3.0 gpm and operating temperature range is -65 to +225°F. Measuring 1.93 in. wide, they allow for mounting multiple units on 2.0 in. centers. Read More

Fluid & Gas Flow Equipment

Double Valves target press clutch/brake applications.

August 16, 2010

Integrating memory, monitoring, and air flow functions into 2 identical valve elements, DM2® Series D Valves will lock out in event of asynchronous valve element movement during actuation or de-actuation, inhibiting further operation of press. Size 2 units feature dirt-tolerant, wear-compensating poppet design and come with BSPP or NPT pipe threads. Available in ¼ or 3/8 in. port sizes, base-mounted valves offer 3/2 normally-closed valve function. Read More

Fluid & Gas Flow Equipment

Vacuum Valves withstand harsh semiconductor and solar processes.

July 9, 2010

Available in angle and inline configurations, Corrosion and Ozone Resistant Vacuum Valves utilize patented technology that completely seals off valve bellows, keeping reactive and corrosive gases from contacting and collecting on bellows surface when valve is open. Units come with air solenoid for electro-pneumatic control of valve and limit switch assembly for remote indication in open or closed position. In event of power loss, poppet valves will automatically close. Read More

Fluid & Gas Flow Equipment

Double Valves target press clutch/brake applications.

April 2, 2010

Featuring dirt tolerant, wear compensating characteristics of poppet technology, DM 2® Series D incorporates memory, monitoring, and air-flow control functions into 2 identical valve elements. Units lock out due to asynchronous movement of valve elements during actuation or de-actuation, resulting in residual outlet pressure of less than 1% of supply. Designated by nominal sizes 2, 4, 8, 12, and 30 with outlet ports up to 2 in., base mounted valves come with BSPP or NPT pipe threads. Read More

Fluid & Gas Flow Equipment

Poppet Valve can dispense low-to-medium viscosity materials.

October 9, 2009

Tridak Model 785 poppet valve is designed to dispense adhesives, silicones, greases, and filled materials. Stroke adjustment and control offer precise adjustment of fluid deposit volume and flow. Dispensed material is shut-off cleanly at end of each cycle. Read More

Fluid & Gas Flow Equipment

Directional Poppet Valve guarantees safe switching.

July 31, 2009

Providing 3 spool positions and 4 connections, direct-operated hydraulic SEC Series facilitates switching of safety applications. Valve features max operating pressure of 420 bar and volume flow of 20 l/min. Using current feed of both solenoids, user can switch into H position for safe set-up mode in machine tools, plastics processing, die-casting machines, and presses. Concealed auxiliary operation allows for switching of valve without solenoid excitation. Read More

Fluid & Gas Flow Equipment

Materials of Construction Change for 1-1/2" and 2" NPT Normally Closed Direct Pilot Operated Poppet Valves

May 21, 2009

Due to the ever increasing costs for raw materials, we have found it necessary to make a change to the materials used in the production of our Poppet Valves in the two larger port size offerings. We have made this change (which has been seamless to the distributor and customer) in an effort to keep any price increases at a tolerable level. As you all know, we recently implemented a price... Read More

Fluid & Gas Flow Equipment

Mini-Poppet Valve is designed for high speed compressors.

January 29, 2009

Model rMAX(TM) mini-poppet valve is engineered with contoured valve seats, operating with specially-shaped poppet heads to provide maximum flow through valve seat and guard. It is suited for applications in gas pipelines, gathering and processing companies, petrochemical, industrial and refrigeration plants. Read More