Globe Valves

Fluid & Gas Flow Equipment

Aseptic Stainless Steel Control Valve handles small volumes.

August 5, 2015

Used for control accuracy and precise dosing, GEMÜ 567 BioStar® 2/2-way globe valve with regulating needle or regulating cone has hygienic and minimal deadleg design that supports CIP and SIP procedures. Valve seat on both versions is sealed using soft-seated seal, and actuator is separated from media-wetted area by FDA-compliant PTFE diaphragm. Integrated bypass is available, and GEMÜ 567 BioStar® control can be integrated into multi-port valve block. Read More

Fluid & Gas Flow Equipment

Metso's Control Valves Prove Superior Reliability and Cost Effectiveness at a Major Chemical Installation in China

August 22, 2014

Metso has successfully delivered more than 70 Neles® globe valves for Phase II of the Longyu Coal project in Henan for the production of 400,000 tons of acetic acid/year and 200,000 tons of ethylene glycol/year. The valves have been installed and their operation in extreme conditions has been flawless, proving the safety and reliability of the technology. Top-of-the-line severe service... Read More

Fluid & Gas Flow Equipment, Mechanical Components & Assemblies

Valve Retrofit Linkage offers installation without any downtime.

June 19, 2014

Designed to accelerate and facilitate installation, Flanged Globe Valve Linkage (FGVL) lets users retrofit existing 2.5–6 in. globe valves. Retrofit linkages utilize EV, RV, and AVK series actuators with forces up to 1,011 lbf to provide close offs needed for large globe valves. Installation is facilitated by steel and aluminum clamp design with selectable fail-safe position switch on actuators, and design adjusts to fit flanged globe valves regardless of make/model. Read More

Fluid & Gas Flow Equipment, Mechanical Power Transmission

HVAC Brain Inc. Now Offering Siemens Actuators and Valve Assemblies

May 23, 2014

HVAC Brain, Inc. expands their online offering of HVAC/R products to include the complete line of Siemens actuators and valve assemblies: HVAC Brain, Inc., retailer of HVAC/R equipment and replacement parts, now carries the entire line of... Read More

Fluid & Gas Flow Equipment

HVAC Brain Inc. Adds Complete Line of Siemens Valves to Online Product Selection

May 2, 2014

HVAC Brain, Inc. has expanded their extensive online selection of HVAC/R products to include Siemens valves. The complete line of Siemens valves can be found online at HVAC Brain, Inc., retailer of HVAC/R equipment and replacement parts, announces they have... Read More

Controls & Controllers, Fluid & Gas Flow Equipment

Jordan Valve Releases the New JCVS Control Valve Series

April 18, 2014

Jordan Valve is pleased to announce the introduction of the Jordan Control Valve Series.  We are excited about the new additions to our Jordan Valve product portfolio, as the JCVS greatly enhances our industrial control valve offering and will provide additional selling opportunities for our distributors and representatives.  We now offer globe style control valves to 24" in a variety of... Read More

Controls & Controllers, Fluid & Gas Flow Equipment, Sensors, Monitors & Transducers

Metso Wins a Significant Contract to Supply Valve Solutions to Saudi Aramco's Petroleum Refining and Petrochemical Production Complex

March 26, 2014

Metso has received a large order to be delivered to Saudi Aramco's petroleum refining and petrochemical production complex currently under construction. The order includes a considerable number and wide range of Metso's Neles® rotary and globe valves and Jamesbury® valves, including control, on-off and safety valves. It also includes Metso's intelligent safety solenoid technology and valve... Read More

Fluid & Gas Flow Equipment, Mechanical Power Transmission, Packaging Equipment, Software

PartnerNetwork Program from Rockwell Automation Adds 10 Industry-Leading Companies

October 31, 2013

New product-supplier partners, an OEM partner and a solution partner offer manufacturers access to best-in-class engineering expertise and product resources MILWAUKEE — Eight new product suppliers in the Americas region have joined the Rockwell Automation Encompass third-party product referencing program, and one existing partner in the program achieved global partner status. Additionally,... Read More

Fluid & Gas Flow Equipment

New Globe Valve Line Gives Metso's Customers in Asia Pacific, China, and India More Control Performance Options - Global Launch to Follow in 2014

July 5, 2013

About one year ago Metso announced a launch of a new line of Neles® globe control valves, targeted in the first phase to the Asia Pacific, Chinese and Indian petrochemical, refining and oil & gas industries. Global launch is to follow in 2014. Metso is a leading international supplier of control valves and services. The addition of the globe valve product line means that Metso's customers in... Read More

Fluid & Gas Flow Equipment

Bellows Seal Globe Valve is designed for steam service.

November 10, 2004

Compact BE3L features zero leak, triple seal construction, where bellows, gland packing, and stem seal act as impermeable barrier between fluid and environment. Forged steel construction and stainless steel bellows are tested to withstand 10,000 cycles, and tight shutoff is accomplished via stellite hardened surfaces on valve plug and seat. Available in ½-2 in. sizes in screwed, socket weld, and 300 lb RF, design is rated to 710 psig and 752°F. Read More

Fluid & Gas Flow Equipment

Globe Control Valve features high capacity.

April 2, 2004

Mark 100 provides 15% higher average flow capacity over conventional valves in sizes 6-16 in. and pressure classes 150-600. Top-entry clamped seats and integral body stand allow easy maintenance and reduce critical downtime. Available with full range of noise and cavitation reduction severe-service trims, valve can be used in chemical manufacturing, oil and gas production, and power generation. Read More

Fluid & Gas Flow Equipment

Valve provides severe service flow control.

December 5, 2003

Multi-Z boiler feed-pump, recirculation control valve handles high-pressure drop applications where entrained solids and cavitation are a problem. Multistage trim design eliminates cavitation and provides extended trim life. Venturi outlet nozzle offer further trim and seat protection from high velocity, cavitation, and flashing, and linear multistage plug provides high throttling resolution. Read More

Fluid & Gas Flow Equipment

Custom Valves suit chemical and nuclear industries.

April 4, 2003

Valve types include slide, double slab gate, gate, ball, plug, glob, piston, tank bottom, sampling, injection, rinsing, and butterfly valves. They are offered as manual or automatic, pneumatic, electric, and hydraulic, in sizes ½-48 in., with pressure classes from ISO PN 10-420. Valves can be manufactured from carbon steel, austenitic and super austenitic stainless steel, duplex steel, nickel and nickel alloys, and alloys such as titanium, zirconium, and tantalum. Read More

Fluid & Gas Flow Equipment

Thermoplastic Valve suits critical applications.

February 10, 2003

Based on globe-style flow pattern with direct operation of valve shaft, air-actuated Series ASO can be operated pneumatically or hydraulically to provide positive, bubble-tight shut-off. Design incorporates clear, acrylic upper housing and heavy-duty spring and is available in 5 types of operation. Valve shaft, machined of solid Teflon®, eliminates sticking, while Fail-Dry® safety feature provides warning of primary seal failure while valve is still 100% operable. Read More

Fluid & Gas Flow Equipment

Globe Valve is actuated by heat.

December 6, 2002

FIRE-CIDE® Valve is operated by external lever, which provides manual lifting action to piston through rotary shaft seal, ensuring fail-safe return. Valve is reset manually, held open by fusible link, and trips closed when link melts. It conforms to OSHA requirements for heat actuated valves on withdrawl lines of indoor tanks containing flammable or combustible fluids. Sizes range from ½-4 in. with threaded or flanged end connections. Read More

Fluid & Gas Flow Equipment

Globe Valve has zero-leakage design.

August 16, 2002

Series 5080 Manual Globe Valve offers pressure range of 0 to 6,000 psi and can be used in metering, throttling, or full open or closed operation. Encapsulated plastic seat protects against wire drawing. Teflon seat and 316 stainless steel body assure compatibility with most gases and liquids. Sizes are 3/4 and 1 in., with Cv of 3.79 and NPT or MS33649 tube connections. Ambient and cryogenic designs are offered for temperatures ranging from -420 to +450°F. Read More

Fluid & Gas Flow Equipment

Control Valves come in various configurations.

March 1, 2002

Mark 78 globe style valves are available with integral flanges in sizes from 1-1/2 in. up through 4 in. Cage-guided and sliding gate valves are also available. All can be used in wide range of operating conditions including process, steam and difficult service. Read More

  • 1